Confirmation Procedure
Perform the following procedures in order. If the failure is duplicated, the confirmation procedure is completed.
- Procedure 1
-
- Insert the emergency fuel funnel into the fuel filler neck - Refer to: Fuel Pressure Relieving
or Fuel Pressure Test (2.0L Engine) (2024 2025)
or Fuel Pressure Test (1.5L Engine)
.
NOTE: The emergency fuel funnel is stored in the trunk tool box.
- Turn the vehicle to the ON mode.
- If the HDS [FTP Sensor Voltage] value is more than 3.62 V, the failure is duplicated.
- Insert the emergency fuel funnel into the fuel filler neck - Refer to: Fuel Pressure Relieving
or Fuel Pressure Test (2.0L Engine) (2024 2025)
or Fuel Pressure Test (1.5L Engine)
.
- Procedure 2
-
- Start the engine.
- Hold the engine speed at 3, 000 rpm without load (CVT in P or N, M/T in neutral) until the radiator fan comes on, then let it idle.
- Monitor the HDS [OBD STATUS (PGM-FI)] for DTC P0450.