APP Sensor Inspection
NOTE:
Since there is no direct method to test the component itself, troubleshooting is performed on the related components.
Test Procedure
Unit output voltage inspection
- Preparation
-
- -
APP sensor 6P connector: disconnected
- -
- Procedure
-
- Jump the APP sensor 6P connector terminals No. 1 and No. 3 with a jumper wire.
- Turn the vehicle to the ON mode.
- Confirm the HDS [APP Sensor B Voltage].
(Disconnected) APP sensor 6P connector female terminals
- Normal Conditions
-
- -
HDS [APP Sensor B Voltage] value is more than 0.2 V .
- -
Results
- If it is normal, there is a problem with the accelerator pedal module.
- If it is abnormal, there is a problem with other related components.