AS_SILCON_UNLOCK, GND Circuit Inspection
Test Procedure
- Preparation
-
- -
Front passenger's door latch 10P connector: disconnected
- -
Front passenger's door control unit connector C (32P): disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
(Disconnected) Front passenger's door latch 10P connector female terminals
(Disconnected)Front passenger's door control unit connector C (32P) female terminals
IG Mode
Normal Conditions
AS_SILCON_UNLOCK open wire inspection
OFF
There is less than 1 Ohm
GND open wire inspection
OFF
There is less than 1 Ohm
Refer to the Open/Shorted Wire Inspection Description
for the method to inspect the shorted circuit below, then start to inspect according to circumstances.
AS_SILCON_UNLOCK shorted to ground inspection
OFF
Not shorted
Results
- If abnormal, there is a problem in the circuit.