October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Altitude COMPENSATOR Sensor

Disconnect wiring from sensor. Measure resistance between terminals No. 2 and 3. Measure resistance between terminals No. 1 and 2. If resistance values are not as specified, replace sensor.

NOTE: This resistance value will change depending on altitude of vehicle.

ALTITUDE COMPENSATOR RESISTANCE SPECIFICATIONS

Test Terminals		(Ohms)
2-3		2000-3000
1-2
At 0-4000 Ft.		500-4500
Above 4000 Ft.		2500-6000