October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vehicle Fastening Check

To check the torque value for the components listed in the tables below:

For the set torque value (min-max): go over again with a torque wrench, setting the average rated value.
For the set torque values plus angle (min-max + x°): loosen the fastener, tighten with a torque wrench, set the average rated value, and complete the operation by tightening to the angle x°.

VEHICLE FASTENING CHECK

	Ref.	Component	Fixing	dia	Torque (daNm)	Torque (Nm)
Refer to Fig 1.	1	Fastening of the steering box to the body	Pin/bush/spacer/nut	M12	6.7 ÷ 7.4	67 - 74
Refer to Fig 2.	2	Fastening of the door hinge to the body	Screw	M10	4.1 ÷ 5.0	41 - 50
Refer to Fig 3.	3	Fastening of the rear part of the chassis to the monocoque (lower side area)	Screw	M10	4.1 ÷ 5.0 +45°	41 - 50 + 45°
Refer to Fig 3.	4	Fastening of the rear part of the chassis to the monocoque (lower central area)	Screw + flat washer	M10	4.1 ÷ 5.0 +45°	41 - 50 + 45°
Refer to Fig 3.	5		Screw + tapered spring washer + flat washer	M10	4.1 ÷ 5.0 +45°	41 - 50 + 45°
Refer to Fig 3.	6	Fastening of the rear part of the chassis to the monocoque (upper side area)	Screw	M12	8.6 ÷ 9.5	86 - 95
Refer to Fig 4.	7	Fastening of the side brace to the monocoque	Screw	M10	3.8 ÷ 4.2	38 - 42
Refer to Fig 5.	8	Fastening of the front chassis to the monocoque	Nut	M10	3.8 ÷ 4.2	38 - 42
Refer to Fig 5.	9	Fastening of the front chassis to the monocoque	Nut	M12	7.1 ÷ 7.9	71 - 79
Refer to Fig 5.	10	Fastening of the front chassis to the monocoque	Screw	M10	5.7 ÷ 6.3	57 - 63

Fig 1: Steering Gear Mounting Point

GC0168846

Courtesy of CHRYSLER GROUP, LLC

	Ref.	Component	Fixing	dia	Torque (daNm)	Torque (Nm)
Refer to Fig 1.	1	Fastening of the steering box to the body	Pin/bush/spacer/nut	M12	6.7 ÷ 7.4	67 - 74

Fig 2: Door Hinge Mounting Points

GC0168881

Courtesy of CHRYSLER GROUP, LLC

	Ref.	Component	Fixing	dia	Torque (daNm)	Torque (Nm)
Refer to Fig 2.	2	Fastening of the door hinge to the body	Screw	M10	4.1 ÷ 5.0	41 - 50

Fig 3: Chassis To The Monocoque Mounting Points

GC0168910

Courtesy of CHRYSLER GROUP, LLC

	Ref.	Component	Fixing	dia	Torque (daNm)	Torque (Nm)
Refer to Fig 3.	3	Fastening of the rear part of the chassis to the monocoque (lower side area)	Screw	M10	4.1 ÷ 5.0 +45°	41 - 50 + 45°
Refer to Fig 3.	4	Fastening of the rear part of the chassis to the monocoque (lower central area)	Screw + flat washer	M10	4.1 ÷ 5.0 +45°	41 - 50 + 45°
Refer to Fig 3.	5		Screw + tapered spring washer + flat washer	M10	4.1 ÷ 5.0 +45°	41 - 50 + 45°
Refer to Fig 3.	6	Fastening of the rear part of the chassis to the monocoque (upper side area)	Screw	M12	8.6 ÷ 9.5	86 - 95

Fig 4: Monocoque Side Brace

GC0168955

Courtesy of CHRYSLER GROUP, LLC

	Ref.	Component	Fixing	dia	Torque (daNm)	Torque (Nm)
Refer to Fig 4.	7	Fastening of the side brace to the monocoque	Screw	M10	3.8 ÷ 4.2	38 - 42

Fig 5: Front Chassis To The Monocoque Mounting Points

GC0168868

Courtesy of CHRYSLER GROUP, LLC

	Ref.	Component	Fixing	dia	Torque (daNm)	Torque (Nm)
Refer to Fig 5.	8	Fastening of the front chassis to the monocoque	Nut	M10	3.8 ÷ 4.2	38 - 42
Refer to Fig 5.	9	Fastening of the front chassis to the monocoque	Nut	M12	7.1 ÷ 7.9	71 - 79
Refer to Fig 5.	10	Fastening of the front chassis to the monocoque	Screw	M10	5.7 ÷ 6.3	57 - 63