Diagnostic Test
- CHECK FOR AN ACTIVE DTC
- With the scan tool, read DTCs.
Is the DTC active?
Yes
- Go To 2
No
- Test complete.
- With the scan tool, read DTCs.
- CHECK THE ELECTRONIC STABILITY CONTROL SWITCH CIRCUIT FOR A SHORT TO GROUND
- Check for a short to ground on the Electronic Stability Control Switch circuit.
Is there a short to ground on the Electronic Stability Control Switch circuit?
Yes
- Repair the short to ground in the Electronic Stability Control Switch circuit.
No
- End of diagnosis.
- Check for a short to ground on the Electronic Stability Control Switch circuit.