LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1982 >> 5000 Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Power-Assisted Rack & Pinion >> Testing >> System Pressure Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

System Pressure Test

  1. Install pressure gauge (US1070) between expansion hose and connecting pipe of valve housing, with valve open. Run engine at idle. Turn steering wheel lock to lock several times.
  2. Check pressure. Correct pressure is 986-1189 psi (68-84 kg/cm2 ). If pressure is not within limits, replace steering gear.
scientia non olet · About LEMON Manuals