LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1990 >> 100 Base, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panels >> Testing >> On-Board Computer Testing >> Boost Pressure Signal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Boost Pressure Signal

Connect voltmeter to terminal No. 9 of (Black) 10 terminal connector. Start engine and allow to idle. Voltage should be approximately 1.5 volts. If voltage is not correct, repair open circuit. See appropriate chassis wiring diagram in WIRING DIAGRAMS section.

scientia non olet · About LEMON Manuals