LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1992 >> 100 Base, 2.8 J, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Engine Speed Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Speed Sensor

  1. Raise left front wheel off of ground. Read individual measuring values in channels 15. See READ INDIVIDUAL MEASURING VALUES MODE in the TESTS W/CODES article. With ignition on, turn left front wheel by hand and observe engine RPM displayed on Scan tester (VAG 1551).
  2. If RPMs are displayed, engine speed sensor is okay. If RPMs are not displayed, check for faulty wiring. If wiring is okay, replace ECU. See ELECTRICAL COMPONENT LOCATIONS  table.
scientia non olet · About LEMON Manuals