October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Checking Electrically
- Disconnect harness connector at wastegate by-pass regulator valve. See Fig 1.
- Connect DVOM multimeter switched to resistance range to wastegate by-pass regulator valve, using adapters from (VW 1594) connector test kit. See Fig 2.
- Measure resistance, must be 25-35 ohms. If NO: Replace wastegate by-pass regulator valve.
Courtesy of AUDI OF AMERICA, INC.
Courtesy of AUDI OF AMERICA, INC.