Test requirements
- There must not be any DTCs stored in DTC memory. See DIAGNOSTIC MODE 3: CHECK DTC MEMORY .
- Coolant temperature must be 80 to 110°C. See DIAGNOSTIC MODE 1: CHECK MEASURING VALUES ; PID 5, Coolant temperature.
- Intake air temperature must not be above the maximum of 60°C. See DIAGNOSTIC MODE 1: CHECK MEASURING VALUES ; PID 15, Intake air temperature.
- Throttle valve angle 12.0 to 16.0 %. See DIAGNOSTIC MODE 1: CHECK MEASURING VALUES ; PID 17: Throttle valve position (absolute).