LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2001 >> allroad Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generators & Regulators >> On-Vehicle Testing >> Generator Output Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Generator Output Test

  1. Set ohmmeter on 100x scale. Connect ohmmeter leads between generator output terminal and all 3 stator terminals one at a time. See Fig 1 . Reverse ohmmeter leads. If ohmmeter indicates continuity in only one direction, go to next step. If ohmmeter indicates continuity in both directions, replace diode assembly.
  2. Connect ohmmeter leads between negative plate and all 3 stator terminals one at a time. Reverse ohmmeter leads. If ohmmeter indicates continuity in only one direction, go to next step. If ohmmeter indicates continuity in both directions, replace diode assembly.
  3. Connect ohmmeter leads between terminal D+ (Blue wire) terminal and all 3 stator terminals one at a time. Reverse ohmmeter leads. If ohmmeter indicates continuity in only one direction, diode assembly is okay. If ohmmeter indicates continuity in both directions, replace diode assembly.
    Fig 1: Testing Diode Assembly (Bosch 110-Amp Generator)
    G96C07205Courtesy of AUDI OF AMERICA, INC.
scientia non olet · About LEMON Manuals