Repair and Diagnosis (Single Page)
You are viewing the full "tree" of links on one page. This can load slowly, but is easier to search. The same page can appear multiple times under a different folder, that is why the page is so large.View "split tree" where inner folders are split out. where inner links are on separate pages.
Quick Lookups- Common Specs & Procedures - B6 Platform
- DTC Index - 4.2L (BHF Engine)
Electrical Component Locations
Fluids
Technical Bulletins
Tire Fitment
Wiring Diagrams- System Wiring Diagrams
- Using lemon2025'S Wiring Diagrams
- Air Conditioning
- Anti-Lock Brakes
- Anti-Theft
- Body Control Modules
- Computer Data Lines
- Cooling Fan
- Cruise Control
- Defoggers
- Electronic Power Steering
- Engine Performance
- Exterior Lights
- Ground Distribution
- Headlights
- Horn
- Instrument Cluster
- Interior Lights
- Memory Systems
- Navigation
- Power Distribution
- Power Door Locks
- Power Mirrors
- Power Seats
- Power Top/Sunroof
- Power Windows
- Radio
- Shift Interlock
- Starting/Charging
- Supplemental Restraints
- Transmission
- Trunk, Tailgate, Fuel Door
- Warning Systems
- Wiper/Washer
- Using lemon2025'S System Wiring Diagrams
- System Wiring Diagrams
- Accessories & Equipment
- Accessories Control Systems
- Communication
- 91 - Communication
- Radio Systems
- General information
- Radio system overview
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- "Chorus" / "Concert" , removing and installing
- "Symphony" radio, removing and installing
- "Symphony II+" in transport mode, activating/deactivating
- CD Changer R41 , removing and installing
- iPod Baseplate R192 , removing and installing
- Speakers in doors, removing and installing
- Inside Loudspeaker R70 , removing and installing
- Bass Loudspeaker R100 , Sedan, removing and installing
- Bass Loudspeaker R100 , Avant, removing and installing
- Amplifier R12 , Sedan, removing and installing
- Amplifier R12 , Avant, removing and installing
- BOSE Amplifier R12 , Sedan, removing and installing
- BOSE Amplifier R12 , Avant, removing and installing
- Inside Microphone R74 , function test
- Inside Microphone R74 , removing and installing
- Antenna Amplifier R24 / Antenna Selection Control Module J515 , sedan, removing and installing
- Left Antenna Module R108 , Avant, removing and installing
- Satellite Radio Systems, USA
- General information
- Radio system overview
- Layout of communication system with Satellite Radio Systems
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Satellite Radio R146 , removing and installing, activating
- Radio, Telephone, Navigation System Antenna R52 , sedan, removing and installing
- Radio, Telephone, Navigation System Antenna R52 , Avant, removing and installing
- Telephone system
- General information
- Telephone systems, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Telephone Baseplate R126 , removing and installing
- Telephone Transceiver R36 , removing and installing
- Telephone Transceiver R36 (telephone, fixed installation), removing and installing
- Telephone Amplifier R86 , Sedan, removing and installing
- Telephone Amplifier R86 , Avant, removing and installing
- Telephone Microphone R38 , removing and installing
- Telephone Antenna R65 , Sedan, removing and installing
- Telephone Antenna R65 , Avant, removing and installing
- Telephone system - USA
- Navigation system IV (BNS 4.0)
- General information
- Navigation system BNS 4.0, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- Function Selector Switch II E272 , removing and installing
- Navigation System Antenna R50 , Sedan, removing and installing
- Navigation System Antenna R50 , Avant, removing and installing
- Navigation system II-D (Navigation System Plus)
- General information
- Error messages on screen
- Navigation system II-D, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Navigation Interface R94 , Sedan, removing and installing
- Navigation Interface R94 , Avant, removing and installing
- Navigation/TV Tuner J415 , removing and installing
- Right Antenna Module R109 , Avant, removing and installing
- RNS-E navigation system
- General information
- Error messages on screen
- RNS-E navigation system, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Navigation/TV Tuner J415 connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- RNSE-E navigation system, USA
- RNS-JP3 navigation system, Japan
- General information
- RNS-JP3 navigation system, overview
- Connectors and connector assignments
- Component locations, general overview
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Antenna Selection Control Module J515 , sedan, removing and installing - sedan
- Antenna Selection Control Module J515 , Avant, removing and installing
- RNS-JP4 navigation system, Japan
- RNS low navigation system
- Telematics
- General information
- On Board Diagnostic (OBD), function
- Audi Telematics by OnStar, functions
- Telematics System - Sedan, layout
- Telematics System - Avant, layout
- Telephone/Telematics Control Module J526 , multi-pin connector assignments
- Telematics System - Sedan, component overview
- Telematics System - Avant, component overview
- Service mode, activating/deactivating
- Telephone/Telematics Control Module J526 , removing and installing
- Telephone/Telematics Control Module J526 , replacing and configuring
- Emergency Battery (Telematics) A16 , switching on/off
- Emergency Battery (Telematics) A16 , removing and installing
- Antenna Splitter R87 - Avant, removing and installing
- Telematics Control Head E264 , removing and installing
- Telephone Microphone R38 , removing and installing
- Auxiliary Speaker (Telematics) R91 , removing and installing
- Telephone Antenna R65 - Sedan, removing and installing
- Telephone Antenna R65 and Telephone Antenna 2 R127 - Avant, removing and installing
- Roof antenna with Navigation System Antenna R50 and Auxiliary Antenna (Telematics) R90 , removing and installing
- GPS Antenna Splitter R110 - Avant, removing and installing
- Speech control system
- Multifunction Steering Wheel
- Steering Column Electronic Systems Control Module J527
- Electronic route book
- Radio Systems
- 91 - Communication
- Steering Column Module, Multi-Function Steering Wheel - Cabriolet
- Steering Column Module, Multi-Function Steering Wheel - Except Cabriolet
- Steering Column Electronic Systems Control Module
- Multi-function steering wheel
- Communication
- Anti-Theft Systems
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Front Doors Central Locking System - Cabriolet
- Front door
- Window regulator, assembly overview
- Window regulator motor, removing and installing
- Front door, adjusting
- Lower door hinge, assembly overview
- Door window, assembly overview
- Front door handle and door lock, assembly overview
- Lock cylinder, assembly overview
- Door handle, assembly overview
- Door lock, assembly overview
- Rear window
- Convenience system
- Component locations
- Notes
- Passenger-side door control unit -J387-
- -G305- transmitter/receiver module 2 for interior monitor
- Right rear window regulator motor -V27-
- Alarm horn -H12-
- Fuel tank flap release motor -V155-
- Boot lid release motor -V139-
- Rear window regulator motor -V26-
- -G303- transmitter/receiver module 1 for interior monitor
- Driver's side door control unit -J386-
- Convenience system central control unit -J393-
- Contact switch for hood -F266-
- Fuel tank flap release motor, removing and installing
- Component locations
- Front door
- Front Doors Central Locking System - Except Cabriolet
- Front door
- Window frame and window lifter, assembly overview
- Window frame and window lifter, removing and installing
- Window lifter and door window, assembly overview
- Window lifter motor, removing and installing
- Front door, adjusting
- Adjusting in relation to body contour
- Front door, adjustment dimensions
- Front door handle and door lock, assembly overview
- Door handle, assembly overview
- Door handle, removing and installing
- Door handle mount and trim panel, removing and installing
- Door lock, removing and installing
- Central locking
- Front door
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Switches, servicing
- Notes
- Switch in center console, removing and installing
- Front seat heating switch, removing and installing
- Light switch, removing and installing
- Glove box light, removing and installing
- Switch for convertible top operation/navigation, removing and installing
- Mirror adjuster switch, removing and installing
- Window regulator switch, removing and installing
- Door contact switch, removing and installing
- Front central locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch, removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light/reading light, replacing
- Luggage compartment lights, removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- 12 V power outlet in luggage compartment, removing and installing
- Horn, servicing
- Switches, servicing
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Body Exterior
- Communication Devices
- Communication
- 91 - Communication
- Radio Systems
- General information
- Radio system overview
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- "Chorus" / "Concert" , removing and installing
- "Symphony" radio, removing and installing
- "Symphony II+" in transport mode, activating/deactivating
- CD Changer R41 , removing and installing
- iPod Baseplate R192 , removing and installing
- Speakers in doors, removing and installing
- Inside Loudspeaker R70 , removing and installing
- Bass Loudspeaker R100 , Sedan, removing and installing
- Bass Loudspeaker R100 , Avant, removing and installing
- Amplifier R12 , Sedan, removing and installing
- Amplifier R12 , Avant, removing and installing
- BOSE Amplifier R12 , Sedan, removing and installing
- BOSE Amplifier R12 , Avant, removing and installing
- Inside Microphone R74 , function test
- Inside Microphone R74 , removing and installing
- Antenna Amplifier R24 / Antenna Selection Control Module J515 , sedan, removing and installing
- Left Antenna Module R108 , Avant, removing and installing
- Satellite Radio Systems, USA
- General information
- Radio system overview
- Layout of communication system with Satellite Radio Systems
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Satellite Radio R146 , removing and installing, activating
- Radio, Telephone, Navigation System Antenna R52 , sedan, removing and installing
- Radio, Telephone, Navigation System Antenna R52 , Avant, removing and installing
- Telephone system
- General information
- Telephone systems, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Telephone Baseplate R126 , removing and installing
- Telephone Transceiver R36 , removing and installing
- Telephone Transceiver R36 (telephone, fixed installation), removing and installing
- Telephone Amplifier R86 , Sedan, removing and installing
- Telephone Amplifier R86 , Avant, removing and installing
- Telephone Microphone R38 , removing and installing
- Telephone Antenna R65 , Sedan, removing and installing
- Telephone Antenna R65 , Avant, removing and installing
- Telephone system - USA
- Navigation system IV (BNS 4.0)
- General information
- Navigation system BNS 4.0, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- Function Selector Switch II E272 , removing and installing
- Navigation System Antenna R50 , Sedan, removing and installing
- Navigation System Antenna R50 , Avant, removing and installing
- Navigation system II-D (Navigation System Plus)
- General information
- Error messages on screen
- Navigation system II-D, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Navigation Interface R94 , Sedan, removing and installing
- Navigation Interface R94 , Avant, removing and installing
- Navigation/TV Tuner J415 , removing and installing
- Right Antenna Module R109 , Avant, removing and installing
- RNS-E navigation system
- General information
- Error messages on screen
- RNS-E navigation system, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Navigation/TV Tuner J415 connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- RNSE-E navigation system, USA
- RNS-JP3 navigation system, Japan
- General information
- RNS-JP3 navigation system, overview
- Connectors and connector assignments
- Component locations, general overview
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Antenna Selection Control Module J515 , sedan, removing and installing - sedan
- Antenna Selection Control Module J515 , Avant, removing and installing
- RNS-JP4 navigation system, Japan
- RNS low navigation system
- Telematics
- General information
- On Board Diagnostic (OBD), function
- Audi Telematics by OnStar, functions
- Telematics System - Sedan, layout
- Telematics System - Avant, layout
- Telephone/Telematics Control Module J526 , multi-pin connector assignments
- Telematics System - Sedan, component overview
- Telematics System - Avant, component overview
- Service mode, activating/deactivating
- Telephone/Telematics Control Module J526 , removing and installing
- Telephone/Telematics Control Module J526 , replacing and configuring
- Emergency Battery (Telematics) A16 , switching on/off
- Emergency Battery (Telematics) A16 , removing and installing
- Antenna Splitter R87 - Avant, removing and installing
- Telematics Control Head E264 , removing and installing
- Telephone Microphone R38 , removing and installing
- Auxiliary Speaker (Telematics) R91 , removing and installing
- Telephone Antenna R65 - Sedan, removing and installing
- Telephone Antenna R65 and Telephone Antenna 2 R127 - Avant, removing and installing
- Roof antenna with Navigation System Antenna R50 and Auxiliary Antenna (Telematics) R90 , removing and installing
- GPS Antenna Splitter R110 - Avant, removing and installing
- Speech control system
- Multifunction Steering Wheel
- Steering Column Electronic Systems Control Module J527
- Electronic route book
- Radio Systems
- 91 - Communication
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Navigation System - Except Cabriolet
- Navigation System IV
- General information
- Navigation System IV (Sedan), component overview
- Navigation System IV (Avant), component overview
- Navigation System IV, layout
- Connections at rear of Control module for navigation with CD-mechanism -J401-
- Control module for navigation with CD-mechanism -J401-, removing and installing
- Antenna for Navigation System (GPS) -R50- (Sedan), removing and installing
- Antenna for Navigation System (GPS) -R50- (Avant), removing and installing
- GPS Antenna Splitter -R110- (Avant), removing and installing
- Telematics
- General information
- Audi Telematics by OnStar(R), functions
- Telematics system, troubleshooting using OnStar(R) system status light
- Telematic system (Sedan), component overview
- Telematic system (Avant), component overview
- Telematic system (Sedan), layout
- Telematic system (Avant), layout
- Terminal assignments/harness electrical connections on Telephone/Telematic Control Module -J526-
- Terminal assignment of multi-pin harness connector on Telephone/Telematic Control Module -J526
- Telephone/Telematic Control Module -J526-, removing and installing
- Telephone/Telematic Control Module -J526-, replacing and reconfiguring
- Emergency battery, switching off/on
- Emergency battery, removing and installing
- Antenna Splitter -R87- (Avant), removing and installing
- Telematic Control Head -E264-, removing and installing
- Telephone Microphone -R38-, removing and installing
- Auxiliary Speaker (Telematic) -R91- (emergency loudspeaker), removing and installing
- Antenna for Navigation System (GPS) -R50- and Auxiliary Antenna (Telematic) -R90-, removing and installing
- Antenna for telephone -R65- (Sedan), removing and installing
- Antenna for telephone -R65- (front) and Antenna 2 for telephone -R127- (rear) (Avant), removing and installing
- Navigation System IV
- On Board Diagnostic (OBD)
- Automatic Climate Control System, On Board Diagnostic (OBD)
- Notes
- On Board Diagnostic (OBD), technical data
- Function
- Safety precautions
- VAS 5051 Vehicle Diagnostic, Testing and Information System, connecting and selecting functions
- Diagnostic Trouble Code (DTC) Memory, checking (function 02)
- Diagnostic Trouble Code (DTC) table
- DTC table up to DTC "00975"
- DTC table from DTC "01044"
- Output Diagnostic Test Mode (DTM) (function 03)
- Basic Setting (function 04)
- Diagnostic Trouble Code (DTC) Memory, erasing (function 05)
- End Output (function 06)
- A/C control head -E87-, coding (function 07)
- Read Measuring Value Block (function 08)
- Overview of selectable display group numbers
- Measuring value blocks 001 to 010
- Measuring value blocks from display group 011 through 019
- Measuring value blocks from display group 020
- Display groups currently not to be used by dealerships
- A/C Control Head -E87-, Adaptation (function 10)
- Adaptation (function 10) in channel 03, performing
- Adaptation of fresh air blower RPM decrease, performing (adaptation channel 08)
- Adaptation of Vehicle Identification Number (VIN), performing (adaptation channel 81)
- CAN-bus comfort system, checking
- Automatic Climate Control System, electrical testing
- Wiring and component testing using VAG 1598 A test box
- Test step 1 to 4
- Test steps 5 to 9
- Components activated by A/C control head -E87-, electrical testing
- Windshield defroster
- Sensor for air quality -G238-
- Automatic Climate Control System, On Board Diagnostic (OBD)
- Communication
- Cruise Control Systems
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Steering Column Module, Multi-Function Steering Wheel - Except Cabriolet
- Steering Column Electronic Systems Control Module
- Multi-function steering wheel
- Electrical Equipment
- Entertainment Systems
- Communication
- 91 - Communication
- Radio Systems
- General information
- Radio system overview
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- "Chorus" / "Concert" , removing and installing
- "Symphony" radio, removing and installing
- "Symphony II+" in transport mode, activating/deactivating
- CD Changer R41 , removing and installing
- iPod Baseplate R192 , removing and installing
- Speakers in doors, removing and installing
- Inside Loudspeaker R70 , removing and installing
- Bass Loudspeaker R100 , Sedan, removing and installing
- Bass Loudspeaker R100 , Avant, removing and installing
- Amplifier R12 , Sedan, removing and installing
- Amplifier R12 , Avant, removing and installing
- BOSE Amplifier R12 , Sedan, removing and installing
- BOSE Amplifier R12 , Avant, removing and installing
- Inside Microphone R74 , function test
- Inside Microphone R74 , removing and installing
- Antenna Amplifier R24 / Antenna Selection Control Module J515 , sedan, removing and installing
- Left Antenna Module R108 , Avant, removing and installing
- Satellite Radio Systems, USA
- General information
- Radio system overview
- Layout of communication system with Satellite Radio Systems
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Satellite Radio R146 , removing and installing, activating
- Radio, Telephone, Navigation System Antenna R52 , sedan, removing and installing
- Radio, Telephone, Navigation System Antenna R52 , Avant, removing and installing
- Telephone system
- General information
- Telephone systems, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Telephone Baseplate R126 , removing and installing
- Telephone Transceiver R36 , removing and installing
- Telephone Transceiver R36 (telephone, fixed installation), removing and installing
- Telephone Amplifier R86 , Sedan, removing and installing
- Telephone Amplifier R86 , Avant, removing and installing
- Telephone Microphone R38 , removing and installing
- Telephone Antenna R65 , Sedan, removing and installing
- Telephone Antenna R65 , Avant, removing and installing
- Telephone system - USA
- Navigation system IV (BNS 4.0)
- General information
- Navigation system BNS 4.0, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- Function Selector Switch II E272 , removing and installing
- Navigation System Antenna R50 , Sedan, removing and installing
- Navigation System Antenna R50 , Avant, removing and installing
- Navigation system II-D (Navigation System Plus)
- General information
- Error messages on screen
- Navigation system II-D, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Navigation Interface R94 , Sedan, removing and installing
- Navigation Interface R94 , Avant, removing and installing
- Navigation/TV Tuner J415 , removing and installing
- Right Antenna Module R109 , Avant, removing and installing
- RNS-E navigation system
- General information
- Error messages on screen
- RNS-E navigation system, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Navigation/TV Tuner J415 connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- RNSE-E navigation system, USA
- RNS-JP3 navigation system, Japan
- General information
- RNS-JP3 navigation system, overview
- Connectors and connector assignments
- Component locations, general overview
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Antenna Selection Control Module J515 , sedan, removing and installing - sedan
- Antenna Selection Control Module J515 , Avant, removing and installing
- RNS-JP4 navigation system, Japan
- RNS low navigation system
- Telematics
- General information
- On Board Diagnostic (OBD), function
- Audi Telematics by OnStar, functions
- Telematics System - Sedan, layout
- Telematics System - Avant, layout
- Telephone/Telematics Control Module J526 , multi-pin connector assignments
- Telematics System - Sedan, component overview
- Telematics System - Avant, component overview
- Service mode, activating/deactivating
- Telephone/Telematics Control Module J526 , removing and installing
- Telephone/Telematics Control Module J526 , replacing and configuring
- Emergency Battery (Telematics) A16 , switching on/off
- Emergency Battery (Telematics) A16 , removing and installing
- Antenna Splitter R87 - Avant, removing and installing
- Telematics Control Head E264 , removing and installing
- Telephone Microphone R38 , removing and installing
- Auxiliary Speaker (Telematics) R91 , removing and installing
- Telephone Antenna R65 - Sedan, removing and installing
- Telephone Antenna R65 and Telephone Antenna 2 R127 - Avant, removing and installing
- Roof antenna with Navigation System Antenna R50 and Auxiliary Antenna (Telematics) R90 , removing and installing
- GPS Antenna Splitter R110 - Avant, removing and installing
- Speech control system
- Multifunction Steering Wheel
- Steering Column Electronic Systems Control Module J527
- Electronic route book
- Radio Systems
- 91 - Communication
- Radio System - Cabriolet
- Radio system
- General notes
- "Concert II" and "Symphony II" radio systems, component overview
- Radio systems with Satellite Digital Audio Radio Service (SDARS), general overview
- Radio system, layout
- Radio system "Concert II" and "Symphony II"
- Multi-pin harness connectors I, II, III, and IV on back of radio
- Black, 20-pin multi-pin harness connector I
- Multi-pin connector II, 8-pin, brown
- Multi-pin connector III, 8-pin, black
- Multi-pin connector IV, 10-pin, red
- Multi-pin harness connectors at amplifier for rear loudspeakers
- 23-pin multi-pin harness connector
- "Concert II" and "Symphony II" radio system with "BOSE sound system", layout
- Radio system "BOSE sound system" with SDARS
- Multi-pin harness connectors on BOSE-amplifier
- 25-pin multi-pin harness connector
- 32-pin multi-pin harness connector
- Multi-pin connectors on rear of "Concert II" radio
- Multi-pin connectors on rear of "Symphony II" radio
- Harness connector at Satellite Radio -R146-
- "Concert II" radio, removing and installing
- "Symphony II" radio, removing and installing
- CD changer, removing and installing
- Satellite radio, removing and installing
- Speakers in front doors, removing and installing
- Speaker in side trim, rear, removing and installing
- Speaker in instrument panel, removing and installing
- Center treble speaker, removing and installing
- Amplifier for the rear speakers or BOSE amplifier, removing and installing
- Antennas in rear lid overview
- Radio system
- Radio System - Except Cabriolet
- Radio system
- General information
- Contact Corrosion
- On Board Diagnostic (OBD)
- Retrofitting of radio systems
- CD equipment, retrofitting
- Transport mode, deactivating
- "Concert II" and "Symphony II" radio systems (Sedan), component overview
- "Concert II" and "Symphony II" radio systems (Avant), component overview
- Radio systems with Satellite Digital Audio Radio Service (SDARS) (Sedan), component overview
- Radio systems with Satellite Digital Audio Radio Service (SDARS) (Avant), component overview
- Radio systems, layout and terminal assignments
- "Concert II" and "Symphony II" radio system (Sedan), layout
- "Concert II" and "Symphony II" radio systems (Avant), layout
- "Concert II" and "Symphony II", Multi-pin connector terminal assignments
- "Concert II" and "Symphony II" radio systems with "BOSE(R) sound system" (Sedan), layout
- "Concert II" and "Symphony II" radio systems with "BOSE(R) sound system" (Avant), layout
- "Concert II" and "Symphony II" radio systems with "BOSE(R) sound system", Multi-pin connector terminal assignments
- BOSE(R) amplifier, multi-pin connector assignments
- Radio system SDARS with BOSE(R) sound system (Sedan), layout
- Multi-pin connector assignments on "Symphony II" radio
- "Concert II" radio unit, removing and installing
- "Symphony II" radio unit, removing and installing
- CD Changer Unit -R41-, removing and installing
- Satellite Radio -R146-, removing and installing (Sedan)
- Satellite Radio -R146-, removing and installing (Avant)
- Loudspeakers in doors, removing and installing
- Front Midrange Speakers -R26- & -R27-, removing and installing
- Rear Bass Speakers -R15- & -R17-, removing and installing
- Rear Midrange Speakers -R34 & -R35-, removing and installing
- Center Mid/High Range Loudspeaker -R158-, removing
- Bass Loudspeaker -R100- (Sedan), removing and installing
- Bass Loudspeaker -R100- (Avant), removing and installing
- Amplifier -R12- for rear loudspeakers (Sedan), removing and installing
- Amplifier -R12- for rear loudspeakers (Avant), removing and installing
- Amplifier -R12- BOSE (R) power amplifier (Sedan), removing and installing
- Amplifier -R12- BOSE (R) power amplifier (Avant), removing and installing
- Antenna Selection Control Module -J515- (Sedan), removing and installing
- Left Antenna Module -R108- (Avant), removing and installing
- Satellite Tuner Antenna -R172- (Sedan), removing and installing
- Satellite Tuner Antenna -R172- (Avant), removing and installing
- Radio system
- Steering Column Module, Multi-Function Steering Wheel - Except Cabriolet
- Steering Column Electronic Systems Control Module
- Multi-function steering wheel
- Communication
- Exterior Lights
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Lights, Switches - Exterior - Cabriolet
- Headlights, servicing - Halogen headlights
- Headlights, servicing - High intensity gas discharge (Xenon) headlights
- Notes
- General overview
- Headlights, removing and installing:
- Headlights, adjusting
- Gas discharge light for low beam, replacing
- Light bulb for high beam, replacing
- Light bulb for turn signal/parking light, replacing
- Headlight beam adjusting motors, removing and installing
- Igniter for gas discharge lamps -N195-, removing and installing
- Repair kit for headlight housing, installing
- Fog lights, servicing
- Side mounted turn signals
- Rear lights, servicing
- High-mount brake light, servicing
- License plate light, servicing
- Steering Column Switch Module (SCSM)
- Notes
- General description
- Steering Column Switch Module (SCSM), removing and installing
- Steering Column Switch Module (SCSM), disassembling
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (front)
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (rear)
- Lock cylinder and Ignition/starter switch, servicing
- Headlight range control, servicing
- Lights, Switches - Exterior - Except Cabriolet
- Headlights, servicing
- Notes
- Halogen headlights, exploded view
- High intensity gas discharge (Xenon) headlights, exploded view
- Headlights, removing and installing
- Headlights, adjusting
- Dipped beam bulb (Halogen headlights), replacing
- Main beam bulb (Halogen headlights), replacing
- Bulb for dipped beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for high beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for turn signal/parking light, replacing
- Side light bulb (High intensity gas discharge (Xenon) headlights), replacing
- Ignitor for gas-discharge lamps -N195-, removing and installing
- Repair kit for headlight housing, installing
- Fog lights, servicing
- Side mounted turn signals
- Rear lights, servicing
- High-mount brake light, servicing
- License plate light, servicing
- Steering Column Switch Module (SCSM)
- Notes
- General description
- Steering Column Switch Module (SCSM), removing and installing
- Steering Column Switch Module (SCSM), disassembling
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (front)
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (rear)
- Lock cylinder and ignition/starter switch, servicing
- Parking aid, servicing
- Notes
- Parking aid, exploded view
- Control module for parking aid -J446-, removing and installing
- Front parking aid warning buzzer -H22- (8-channel parking aid), removing and installing
- Warning buzzer for parking -H15- (sedan), removing and installing
- Warning buzzer for parking -H15- (Avant), removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Headlight range control, servicing
- Headlights, servicing
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Electrical Equipment
- Gauges & Instrument Panels
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Instrument Systems - Cabriolet
- Instrument cluster
- Notes
- Fault message "dEF" on trip computer display
- Instrument cluster, removing and installing
- Multi-pin connectors on instrument cluster
- Assignment of contacts on multi-pin connector on instrument cluster
- Terminal assignment on connector for fuel gauge sensor
- Vehicles with front wheel drive
- Terminal assignment of the 4-pin connector on fuel gauge sender
- Vehicles with all wheel drive:
- Fuel gauge sensor I -G-
- Terminal assignment of 4-pin connector on fuel gauge sensor I -G-
- Fuel Level Sensor 2 -G169-
- Terminal assignment of the 4-pin harness connector at fuel level sensor 2 -G169-
- Instrument cluster
- Instrument Systems - Except Cabriolet
- Instrument cluster
- Notes
- Fault message "dEF" on trip computer display
- Instrument cluster, removing and installing
- Multi-pin connectors on instrument cluster
- Assignment of contacts on multi-pin connector on instrument cluster
- Multi-pin connector 32-pin, green
- Terminal assignment on connector for fuel gauge sensor
- Instrument cluster
- Interior Trim - Cabriolet
- Front door trims
- Component locations, assembly overview
- Door trim, assembly overview
- Trim, removing and installing
- Insulation, assembly overview
- Routing of wiring in door trim, assembly overview
- Armrest, removing and installing
- Central locking switch, removing and installing
- Mirror adjustment switch, removing and installing
- Interior door handle, removing and installing
- Switch panel for window regulator, removing and installing
- Switch panel for memory seat, removing and installing
- Switch panel for tailgate release and/or deactivation of anti-theft alarm, assembly overview
- Door warning light and courtesy light, removing and installing
- Treble loudspeaker, removing and installing
- Trim of bass loudspeaker, removing and installing
- Rear side trim
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Special tools and equipment
- Removing
- Remove left instrument panel cover
- Removing left instrument panel end mounting
- Detaching connectors on vent temperature sensor -G150- and -G151-
- Removing instrument panel vent
- Removing left and right instrument panel loudspeaker
- Removing and installing tray, switch and cup holder
- Removing light switch and adjuster for headlight range control
- Removing left instrument panel trim
- Removing instrument panel mountings driver's side.
- Removing upper steering column switch trim
- Removing sunlight penetration photosensor -G107-
- Removing trim for center defroster vent
- Removing center instrument panel loudspeaker
- Removing trim for right instrument panel cover.
- Removing right instrument panel cover
- Removing right instrument panel end mountings.
- Removing center instrument panel mountings
- Installing
- Left and/or right instrument panel air duct, removing and installing
- Central tube
- Trims
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Floor covering, assembly overview
- Sill panel trim, removing and installing
- Foot rest, removing and installing
- Foot rest holder, removing and installing
- Sun visor, removing and installing
- Sun visor mount, removing and installing
- Center sun visor, removing and installing
- Windshield trim, assembly overview
- Make-up mirror light, removing and installing
- Interior light / reading light, removing and installing
- Luggage compartment trim
- Trim for convertible top compartment
- Variable convertible top compartment
- Variable convertible top compartment, removing and installing
- Convertible top compartment lid, assembly overview
- Handle mount trim, assembly overview
- Handle for variable convertible top compartment, removing and installing
- Microswitch for variable convertible top compartment, removing and installing
- Toothed segment of variable convertible top compartment, removing and installing
- Rack of variable convertible top compartment, removing and installing
- Guide rail of variable convertible top compartment, removing and installing
- Console of variable convertible top compartment, assembly overview
- Front door trims
- Interior Trim - Except Cabriolet
- Front door trim
- Component locations, assembly overview
- Front door trim components, assembly overview
- Armrest, assembly overview
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Cable routing and door trim, assembly overview
- Door warning light and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, assembly overview
- Rear door trim, assembly overview
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, assembly overview
- Cable routing and door trim, assembly overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door handle, removing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Upper trim for steering column switches, removing
- Notes
- Center defroster outlet, removing
- Instrument panel speaker, removing
- Left instrument panel cover, removing
- Right instrument panel cover, removing
- Left trim for instrument panel, removing and installing
- Right trim for instrument panel, removing and installing
- Left and right instrument panel vents, removing and installing
- Left and right instrument panel air guides, removing and installing
- Removing
- Center instrument panel vent, removing and installing
- Cross member
- Roof trim (sedan)
- Roof trim (Avant)
- Trim
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, assembly overview
- Lower B-pillar trim, assembly overview
- C-pillar trim, assembly overview
- D-pillar trim, assembly overview
- Roof end, assembly overview
- Wheelhousing trim, assembly overview
- Rear shelf, assembly overview
- Rear lid trim, assembly overview
- Rear cross panel trim, assembly overview
- Luggage compartment side trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear panel trim, assembly overview
- Rear panel sill, assembly overview
- Dirt tray, assembly overview
- Luggage compartment floor mat, assembly overview
- Floor mat, assembly overview
- Trim (Avant)
- C-pillar trim, assembly overview
- Trim above rear door, assembly overview
- D-pillar trim, assembly overview
- Roof end trim, assembly overview
- Rear lid trim, assembly overview
- Side luggage compartment trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear power outlet, removing and installing
- Partition grille, assembly overview
- Rear cross panel trim, assembly overview
- Storage area floor, assembly overview
- Dirt tray, assembly overview
- Console tie-downs, assembly overview
- Front door trim
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Windshield Wiper Washer System - Except Cabriolet
- Front windshield wiper system, servicing
- Front windshield washer system, servicing
- Rear windshield wiper and washer system, servicing (Avant)
- Headlight washer system, servicing
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- Headlights
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Lights, Switches - Exterior - Cabriolet
- Headlights, servicing - Halogen headlights
- Headlights, servicing - High intensity gas discharge (Xenon) headlights
- Notes
- General overview
- Headlights, removing and installing:
- Headlights, adjusting
- Gas discharge light for low beam, replacing
- Light bulb for high beam, replacing
- Light bulb for turn signal/parking light, replacing
- Headlight beam adjusting motors, removing and installing
- Igniter for gas discharge lamps -N195-, removing and installing
- Repair kit for headlight housing, installing
- Fog lights, servicing
- Side mounted turn signals
- Rear lights, servicing
- High-mount brake light, servicing
- License plate light, servicing
- Steering Column Switch Module (SCSM)
- Notes
- General description
- Steering Column Switch Module (SCSM), removing and installing
- Steering Column Switch Module (SCSM), disassembling
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (front)
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (rear)
- Lock cylinder and Ignition/starter switch, servicing
- Headlight range control, servicing
- Lights, Switches - Exterior - Except Cabriolet
- Headlights, servicing
- Notes
- Halogen headlights, exploded view
- High intensity gas discharge (Xenon) headlights, exploded view
- Headlights, removing and installing
- Headlights, adjusting
- Dipped beam bulb (Halogen headlights), replacing
- Main beam bulb (Halogen headlights), replacing
- Bulb for dipped beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for high beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for turn signal/parking light, replacing
- Side light bulb (High intensity gas discharge (Xenon) headlights), replacing
- Ignitor for gas-discharge lamps -N195-, removing and installing
- Repair kit for headlight housing, installing
- Fog lights, servicing
- Side mounted turn signals
- Rear lights, servicing
- High-mount brake light, servicing
- License plate light, servicing
- Steering Column Switch Module (SCSM)
- Notes
- General description
- Steering Column Switch Module (SCSM), removing and installing
- Steering Column Switch Module (SCSM), disassembling
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (front)
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (rear)
- Lock cylinder and ignition/starter switch, servicing
- Parking aid, servicing
- Notes
- Parking aid, exploded view
- Control module for parking aid -J446-, removing and installing
- Front parking aid warning buzzer -H22- (8-channel parking aid), removing and installing
- Warning buzzer for parking -H15- (sedan), removing and installing
- Warning buzzer for parking -H15- (Avant), removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Headlight range control, servicing
- Headlights, servicing
- Windshield Wiper Washer System - Except Cabriolet
- Front windshield wiper system, servicing
- Front windshield washer system, servicing
- Rear windshield wiper and washer system, servicing (Avant)
- Headlight washer system, servicing
- Electrical Equipment
- Heated Glass/Defoggers
- On Board Diagnostic (OBD)
- Automatic Climate Control System, On Board Diagnostic (OBD)
- Notes
- On Board Diagnostic (OBD), technical data
- Function
- Safety precautions
- VAS 5051 Vehicle Diagnostic, Testing and Information System, connecting and selecting functions
- Diagnostic Trouble Code (DTC) Memory, checking (function 02)
- Diagnostic Trouble Code (DTC) table
- DTC table up to DTC "00975"
- DTC table from DTC "01044"
- Output Diagnostic Test Mode (DTM) (function 03)
- Basic Setting (function 04)
- Diagnostic Trouble Code (DTC) Memory, erasing (function 05)
- End Output (function 06)
- A/C control head -E87-, coding (function 07)
- Read Measuring Value Block (function 08)
- Overview of selectable display group numbers
- Measuring value blocks 001 to 010
- Measuring value blocks from display group 011 through 019
- Measuring value blocks from display group 020
- Display groups currently not to be used by dealerships
- A/C Control Head -E87-, Adaptation (function 10)
- Adaptation (function 10) in channel 03, performing
- Adaptation of fresh air blower RPM decrease, performing (adaptation channel 08)
- Adaptation of Vehicle Identification Number (VIN), performing (adaptation channel 81)
- CAN-bus comfort system, checking
- Automatic Climate Control System, electrical testing
- Wiring and component testing using VAG 1598 A test box
- Test step 1 to 4
- Test steps 5 to 9
- Components activated by A/C control head -E87-, electrical testing
- Windshield defroster
- Sensor for air quality -G238-
- Automatic Climate Control System, On Board Diagnostic (OBD)
- On Board Diagnostic (OBD)
- Horns
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Switches, servicing
- Notes
- Switch in center console, removing and installing
- Front seat heating switch, removing and installing
- Light switch, removing and installing
- Glove box light, removing and installing
- Switch for convertible top operation/navigation, removing and installing
- Mirror adjuster switch, removing and installing
- Window regulator switch, removing and installing
- Door contact switch, removing and installing
- Front central locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch, removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light/reading light, replacing
- Luggage compartment lights, removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- 12 V power outlet in luggage compartment, removing and installing
- Horn, servicing
- Switches, servicing
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Ignition Switch/Steering Lock
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment
- Infotainment
- Communication
- 91 - Communication
- Radio Systems
- General information
- Radio system overview
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- "Chorus" / "Concert" , removing and installing
- "Symphony" radio, removing and installing
- "Symphony II+" in transport mode, activating/deactivating
- CD Changer R41 , removing and installing
- iPod Baseplate R192 , removing and installing
- Speakers in doors, removing and installing
- Inside Loudspeaker R70 , removing and installing
- Bass Loudspeaker R100 , Sedan, removing and installing
- Bass Loudspeaker R100 , Avant, removing and installing
- Amplifier R12 , Sedan, removing and installing
- Amplifier R12 , Avant, removing and installing
- BOSE Amplifier R12 , Sedan, removing and installing
- BOSE Amplifier R12 , Avant, removing and installing
- Inside Microphone R74 , function test
- Inside Microphone R74 , removing and installing
- Antenna Amplifier R24 / Antenna Selection Control Module J515 , sedan, removing and installing
- Left Antenna Module R108 , Avant, removing and installing
- Satellite Radio Systems, USA
- General information
- Radio system overview
- Layout of communication system with Satellite Radio Systems
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Satellite Radio R146 , removing and installing, activating
- Radio, Telephone, Navigation System Antenna R52 , sedan, removing and installing
- Radio, Telephone, Navigation System Antenna R52 , Avant, removing and installing
- Telephone system
- General information
- Telephone systems, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Telephone Baseplate R126 , removing and installing
- Telephone Transceiver R36 , removing and installing
- Telephone Transceiver R36 (telephone, fixed installation), removing and installing
- Telephone Amplifier R86 , Sedan, removing and installing
- Telephone Amplifier R86 , Avant, removing and installing
- Telephone Microphone R38 , removing and installing
- Telephone Antenna R65 , Sedan, removing and installing
- Telephone Antenna R65 , Avant, removing and installing
- Telephone system - USA
- Navigation system IV (BNS 4.0)
- General information
- Navigation system BNS 4.0, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- Function Selector Switch II E272 , removing and installing
- Navigation System Antenna R50 , Sedan, removing and installing
- Navigation System Antenna R50 , Avant, removing and installing
- Navigation system II-D (Navigation System Plus)
- General information
- Error messages on screen
- Navigation system II-D, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Navigation Interface R94 , Sedan, removing and installing
- Navigation Interface R94 , Avant, removing and installing
- Navigation/TV Tuner J415 , removing and installing
- Right Antenna Module R109 , Avant, removing and installing
- RNS-E navigation system
- General information
- Error messages on screen
- RNS-E navigation system, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Navigation/TV Tuner J415 connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- RNSE-E navigation system, USA
- RNS-JP3 navigation system, Japan
- General information
- RNS-JP3 navigation system, overview
- Connectors and connector assignments
- Component locations, general overview
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Antenna Selection Control Module J515 , sedan, removing and installing - sedan
- Antenna Selection Control Module J515 , Avant, removing and installing
- RNS-JP4 navigation system, Japan
- RNS low navigation system
- Telematics
- General information
- On Board Diagnostic (OBD), function
- Audi Telematics by OnStar, functions
- Telematics System - Sedan, layout
- Telematics System - Avant, layout
- Telephone/Telematics Control Module J526 , multi-pin connector assignments
- Telematics System - Sedan, component overview
- Telematics System - Avant, component overview
- Service mode, activating/deactivating
- Telephone/Telematics Control Module J526 , removing and installing
- Telephone/Telematics Control Module J526 , replacing and configuring
- Emergency Battery (Telematics) A16 , switching on/off
- Emergency Battery (Telematics) A16 , removing and installing
- Antenna Splitter R87 - Avant, removing and installing
- Telematics Control Head E264 , removing and installing
- Telephone Microphone R38 , removing and installing
- Auxiliary Speaker (Telematics) R91 , removing and installing
- Telephone Antenna R65 - Sedan, removing and installing
- Telephone Antenna R65 and Telephone Antenna 2 R127 - Avant, removing and installing
- Roof antenna with Navigation System Antenna R50 and Auxiliary Antenna (Telematics) R90 , removing and installing
- GPS Antenna Splitter R110 - Avant, removing and installing
- Speech control system
- Multifunction Steering Wheel
- Steering Column Electronic Systems Control Module J527
- Electronic route book
- Radio Systems
- 91 - Communication
- Navigation System - Cabriolet
- Navigation system IV
- Notes
- General description
- Navigation system IV, general overview
- Navigation system IV, design
- Connectors at rear of Control module for navigation with CD-mechanism -J401-
- Function Selector Switch II -E272-, removing and installing
- Control module for navigation with CD-mechanism -J401-, removing and installing
- Antennas in rear lid overview
- Satellite tuner antenna, removing and installing
- Navigation system IV
- Navigation System - Except Cabriolet
- Navigation System IV
- General information
- Navigation System IV (Sedan), component overview
- Navigation System IV (Avant), component overview
- Navigation System IV, layout
- Connections at rear of Control module for navigation with CD-mechanism -J401-
- Control module for navigation with CD-mechanism -J401-, removing and installing
- Antenna for Navigation System (GPS) -R50- (Sedan), removing and installing
- Antenna for Navigation System (GPS) -R50- (Avant), removing and installing
- GPS Antenna Splitter -R110- (Avant), removing and installing
- Telematics
- General information
- Audi Telematics by OnStar(R), functions
- Telematics system, troubleshooting using OnStar(R) system status light
- Telematic system (Sedan), component overview
- Telematic system (Avant), component overview
- Telematic system (Sedan), layout
- Telematic system (Avant), layout
- Terminal assignments/harness electrical connections on Telephone/Telematic Control Module -J526-
- Terminal assignment of multi-pin harness connector on Telephone/Telematic Control Module -J526
- Telephone/Telematic Control Module -J526-, removing and installing
- Telephone/Telematic Control Module -J526-, replacing and reconfiguring
- Emergency battery, switching off/on
- Emergency battery, removing and installing
- Antenna Splitter -R87- (Avant), removing and installing
- Telematic Control Head -E264-, removing and installing
- Telephone Microphone -R38-, removing and installing
- Auxiliary Speaker (Telematic) -R91- (emergency loudspeaker), removing and installing
- Antenna for Navigation System (GPS) -R50- and Auxiliary Antenna (Telematic) -R90-, removing and installing
- Antenna for telephone -R65- (Sedan), removing and installing
- Antenna for telephone -R65- (front) and Antenna 2 for telephone -R127- (rear) (Avant), removing and installing
- Navigation System IV
- Radio System - Cabriolet
- Radio system
- General notes
- "Concert II" and "Symphony II" radio systems, component overview
- Radio systems with Satellite Digital Audio Radio Service (SDARS), general overview
- Radio system, layout
- Radio system "Concert II" and "Symphony II"
- Multi-pin harness connectors I, II, III, and IV on back of radio
- Black, 20-pin multi-pin harness connector I
- Multi-pin connector II, 8-pin, brown
- Multi-pin connector III, 8-pin, black
- Multi-pin connector IV, 10-pin, red
- Multi-pin harness connectors at amplifier for rear loudspeakers
- 23-pin multi-pin harness connector
- "Concert II" and "Symphony II" radio system with "BOSE sound system", layout
- Radio system "BOSE sound system" with SDARS
- Multi-pin harness connectors on BOSE-amplifier
- 25-pin multi-pin harness connector
- 32-pin multi-pin harness connector
- Multi-pin connectors on rear of "Concert II" radio
- Multi-pin connectors on rear of "Symphony II" radio
- Harness connector at Satellite Radio -R146-
- "Concert II" radio, removing and installing
- "Symphony II" radio, removing and installing
- CD changer, removing and installing
- Satellite radio, removing and installing
- Speakers in front doors, removing and installing
- Speaker in side trim, rear, removing and installing
- Speaker in instrument panel, removing and installing
- Center treble speaker, removing and installing
- Amplifier for the rear speakers or BOSE amplifier, removing and installing
- Antennas in rear lid overview
- Radio system
- Radio System - Except Cabriolet
- Radio system
- General information
- Contact Corrosion
- On Board Diagnostic (OBD)
- Retrofitting of radio systems
- CD equipment, retrofitting
- Transport mode, deactivating
- "Concert II" and "Symphony II" radio systems (Sedan), component overview
- "Concert II" and "Symphony II" radio systems (Avant), component overview
- Radio systems with Satellite Digital Audio Radio Service (SDARS) (Sedan), component overview
- Radio systems with Satellite Digital Audio Radio Service (SDARS) (Avant), component overview
- Radio systems, layout and terminal assignments
- "Concert II" and "Symphony II" radio system (Sedan), layout
- "Concert II" and "Symphony II" radio systems (Avant), layout
- "Concert II" and "Symphony II", Multi-pin connector terminal assignments
- "Concert II" and "Symphony II" radio systems with "BOSE(R) sound system" (Sedan), layout
- "Concert II" and "Symphony II" radio systems with "BOSE(R) sound system" (Avant), layout
- "Concert II" and "Symphony II" radio systems with "BOSE(R) sound system", Multi-pin connector terminal assignments
- BOSE(R) amplifier, multi-pin connector assignments
- Radio system SDARS with BOSE(R) sound system (Sedan), layout
- Multi-pin connector assignments on "Symphony II" radio
- "Concert II" radio unit, removing and installing
- "Symphony II" radio unit, removing and installing
- CD Changer Unit -R41-, removing and installing
- Satellite Radio -R146-, removing and installing (Sedan)
- Satellite Radio -R146-, removing and installing (Avant)
- Loudspeakers in doors, removing and installing
- Front Midrange Speakers -R26- & -R27-, removing and installing
- Rear Bass Speakers -R15- & -R17-, removing and installing
- Rear Midrange Speakers -R34 & -R35-, removing and installing
- Center Mid/High Range Loudspeaker -R158-, removing
- Bass Loudspeaker -R100- (Sedan), removing and installing
- Bass Loudspeaker -R100- (Avant), removing and installing
- Amplifier -R12- for rear loudspeakers (Sedan), removing and installing
- Amplifier -R12- for rear loudspeakers (Avant), removing and installing
- Amplifier -R12- BOSE (R) power amplifier (Sedan), removing and installing
- Amplifier -R12- BOSE (R) power amplifier (Avant), removing and installing
- Antenna Selection Control Module -J515- (Sedan), removing and installing
- Left Antenna Module -R108- (Avant), removing and installing
- Satellite Tuner Antenna -R172- (Sedan), removing and installing
- Satellite Tuner Antenna -R172- (Avant), removing and installing
- Radio system
- Steering Column Module, Multi-Function Steering Wheel - Except Cabriolet
- Steering Column Electronic Systems Control Module
- Multi-function steering wheel
- Communication
- Interior/Exterior Trim
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Interior Equipment - Except Cabriolet
- Storage compartments and covers
- Glove compartment, assembly overview
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Brake for glove compartment cover, removing and installing (vehicles with knee bolster)
- Driver-side storage compartment (with and without knee bolster), assembly overview
- Instrument cluster, removing
- Center armrest, assembly overview
- Support foot for center armrest, removing and installing
- Center console, assembly overview
- Cassette storage compartment, assembly overview
- Shift cover and shifter boot, assembly overview
- Navigation control head from center console, assembly overview
- Cigarette lighter from center console, assembly overview
- Footwell trim, removing and installing
- Trim on parking brake lever, assembly overview
- Parking brake lever handle, removing
- Cellular phone holder in center console, assembly overview
- Holes for cellular phone holder on center console, drilling
- Holder for telephone handset on center console, assembly overview
- Holes for telephone handset holder on center console, drilling
- Center part of instrument panel, assembly overview
- Beverage holder and storage compartment, removing and installing
- Switch strip cover and trim, assembly overview
- Front ashtray, assembly overview
- Rear ashtray, assembly overview
- Interior rear view mirror
- Interior rear view mirror, removing and installing
- Interior rear view mirror, removing (automatic day/night mirror, interior rear view mirror with compass)
- Automatic day/night interior rear view mirror, removing
- Automatic day/night interior rear view mirror, testing function
- Interior rear view mirror with compass (only USA), calibrating
- Retaining plate for interior rear view mirror, adhering
- Storage compartments and covers
- Interior Trim - Cabriolet
- Front door trims
- Component locations, assembly overview
- Door trim, assembly overview
- Trim, removing and installing
- Insulation, assembly overview
- Routing of wiring in door trim, assembly overview
- Armrest, removing and installing
- Central locking switch, removing and installing
- Mirror adjustment switch, removing and installing
- Interior door handle, removing and installing
- Switch panel for window regulator, removing and installing
- Switch panel for memory seat, removing and installing
- Switch panel for tailgate release and/or deactivation of anti-theft alarm, assembly overview
- Door warning light and courtesy light, removing and installing
- Treble loudspeaker, removing and installing
- Trim of bass loudspeaker, removing and installing
- Rear side trim
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Special tools and equipment
- Removing
- Remove left instrument panel cover
- Removing left instrument panel end mounting
- Detaching connectors on vent temperature sensor -G150- and -G151-
- Removing instrument panel vent
- Removing left and right instrument panel loudspeaker
- Removing and installing tray, switch and cup holder
- Removing light switch and adjuster for headlight range control
- Removing left instrument panel trim
- Removing instrument panel mountings driver's side.
- Removing upper steering column switch trim
- Removing sunlight penetration photosensor -G107-
- Removing trim for center defroster vent
- Removing center instrument panel loudspeaker
- Removing trim for right instrument panel cover.
- Removing right instrument panel cover
- Removing right instrument panel end mountings.
- Removing center instrument panel mountings
- Installing
- Left and/or right instrument panel air duct, removing and installing
- Central tube
- Trims
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Floor covering, assembly overview
- Sill panel trim, removing and installing
- Foot rest, removing and installing
- Foot rest holder, removing and installing
- Sun visor, removing and installing
- Sun visor mount, removing and installing
- Center sun visor, removing and installing
- Windshield trim, assembly overview
- Make-up mirror light, removing and installing
- Interior light / reading light, removing and installing
- Luggage compartment trim
- Trim for convertible top compartment
- Variable convertible top compartment
- Variable convertible top compartment, removing and installing
- Convertible top compartment lid, assembly overview
- Handle mount trim, assembly overview
- Handle for variable convertible top compartment, removing and installing
- Microswitch for variable convertible top compartment, removing and installing
- Toothed segment of variable convertible top compartment, removing and installing
- Rack of variable convertible top compartment, removing and installing
- Guide rail of variable convertible top compartment, removing and installing
- Console of variable convertible top compartment, assembly overview
- Front door trims
- Interior Trim - Except Cabriolet
- Front door trim
- Component locations, assembly overview
- Front door trim components, assembly overview
- Armrest, assembly overview
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Cable routing and door trim, assembly overview
- Door warning light and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, assembly overview
- Rear door trim, assembly overview
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, assembly overview
- Cable routing and door trim, assembly overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door handle, removing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Upper trim for steering column switches, removing
- Notes
- Center defroster outlet, removing
- Instrument panel speaker, removing
- Left instrument panel cover, removing
- Right instrument panel cover, removing
- Left trim for instrument panel, removing and installing
- Right trim for instrument panel, removing and installing
- Left and right instrument panel vents, removing and installing
- Left and right instrument panel air guides, removing and installing
- Removing
- Center instrument panel vent, removing and installing
- Cross member
- Roof trim (sedan)
- Roof trim (Avant)
- Trim
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, assembly overview
- Lower B-pillar trim, assembly overview
- C-pillar trim, assembly overview
- D-pillar trim, assembly overview
- Roof end, assembly overview
- Wheelhousing trim, assembly overview
- Rear shelf, assembly overview
- Rear lid trim, assembly overview
- Rear cross panel trim, assembly overview
- Luggage compartment side trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear panel trim, assembly overview
- Rear panel sill, assembly overview
- Dirt tray, assembly overview
- Luggage compartment floor mat, assembly overview
- Floor mat, assembly overview
- Trim (Avant)
- C-pillar trim, assembly overview
- Trim above rear door, assembly overview
- D-pillar trim, assembly overview
- Roof end trim, assembly overview
- Rear lid trim, assembly overview
- Side luggage compartment trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear power outlet, removing and installing
- Partition grille, assembly overview
- Rear cross panel trim, assembly overview
- Storage area floor, assembly overview
- Dirt tray, assembly overview
- Console tie-downs, assembly overview
- Front door trim
- Body Exterior
- Interior/Illumination Lights
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Switches, servicing
- Notes
- Switch in center console, removing and installing
- Front seat heating switch, removing and installing
- Light switch, removing and installing
- Glove box light, removing and installing
- Switch for convertible top operation/navigation, removing and installing
- Mirror adjuster switch, removing and installing
- Window regulator switch, removing and installing
- Door contact switch, removing and installing
- Front central locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch, removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light/reading light, replacing
- Luggage compartment lights, removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- 12 V power outlet in luggage compartment, removing and installing
- Horn, servicing
- Switches, servicing
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Electrical Equipment
- Mirrors
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- Exterior Equipment - Cabriolet
- Exterior Equipment - Except Cabriolet
- Interior Equipment - Except Cabriolet
- Storage compartments and covers
- Glove compartment, assembly overview
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Brake for glove compartment cover, removing and installing (vehicles with knee bolster)
- Driver-side storage compartment (with and without knee bolster), assembly overview
- Instrument cluster, removing
- Center armrest, assembly overview
- Support foot for center armrest, removing and installing
- Center console, assembly overview
- Cassette storage compartment, assembly overview
- Shift cover and shifter boot, assembly overview
- Navigation control head from center console, assembly overview
- Cigarette lighter from center console, assembly overview
- Footwell trim, removing and installing
- Trim on parking brake lever, assembly overview
- Parking brake lever handle, removing
- Cellular phone holder in center console, assembly overview
- Holes for cellular phone holder on center console, drilling
- Holder for telephone handset on center console, assembly overview
- Holes for telephone handset holder on center console, drilling
- Center part of instrument panel, assembly overview
- Beverage holder and storage compartment, removing and installing
- Switch strip cover and trim, assembly overview
- Front ashtray, assembly overview
- Rear ashtray, assembly overview
- Interior rear view mirror
- Interior rear view mirror, removing and installing
- Interior rear view mirror, removing (automatic day/night mirror, interior rear view mirror with compass)
- Automatic day/night interior rear view mirror, removing
- Automatic day/night interior rear view mirror, testing function
- Interior rear view mirror with compass (only USA), calibrating
- Retaining plate for interior rear view mirror, adhering
- Storage compartments and covers
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Switches, servicing
- Notes
- Switch in center console, removing and installing
- Front seat heating switch, removing and installing
- Light switch, removing and installing
- Glove box light, removing and installing
- Switch for convertible top operation/navigation, removing and installing
- Mirror adjuster switch, removing and installing
- Window regulator switch, removing and installing
- Door contact switch, removing and installing
- Front central locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch, removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light/reading light, replacing
- Luggage compartment lights, removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- 12 V power outlet in luggage compartment, removing and installing
- Horn, servicing
- Switches, servicing
- Body On Board Diagnostic (OBD)
- Seats
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- On Board Diagnostic (OBD) - Driver's Seat Adjustment With Memory
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- On Board Diagnostic (OBD), initiating program
- On Board Diagnostic (OBD) functions
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- Seats Frames - Cabriolet
- Front seats (memory seat, electric seat)
- Tools
- Front seat, assembly overview
- Front seat with faulty forward and backward seat adjustment motor or defective control unit, removing and installing
- Front seat rail cover, assembly overview
- Rear seat rail cover, assembly overview
- Connectors, disconnecting
- VAS 6036 Airbag adapter, connecting
- Connector assignment for connection point
- Connector for side airbag, detaching
- Front seat backrest, assembly overview
- Side trims (outboard side), assembly overview
- Side trim, inboard side, assembly overview
- Easy-entry facility, removing and installing
- Bowden cable for backrest lock, assembly overview
- Microswitch for seatback release, assembly overview
- Microswitch for seatback release, adjusting
- Microswitch for headrest, assembly overview
- Microswitch for headrest, adjusting
- Backrest (standard seat), replacing
- Seat pan (standard seat), replacing
- Guide for side airbag, assembly overview
- Seat adjustment switch, removing and installing
- Switch for 4-way lumbar support, removing and installing
- Control unit, removing and installing
- Forward and backward seat adjustment motor, assembly overview
- Seat height adjustment motor, assembly overview
- Seat cushion extension (sports seat), assembly overview
- Motor for backrest inclination adjustment, assembly overview
- Backrest cover panel, assembly overview
- Backrest frame, assembly overview
- 4-way lumbar support, assembly overview
- Lumbar support adjustment motors, assembly overview
- Head restraint, removing and installing
- Rear footwell light, removing
- Seat pan spring pad with wiring harness, assembly overview
- Seat wiring assignment
- Backrest wiring assignment
- Seat backrest wiring harness, assembly overview
- Rear seats
- Front seats (memory seat, electric seat)
- Seats Frames - Except Cabriolet
- Front seats
- Front seats (power seat with memory)
- Notes
- Tools
- Seat, assembly overview
- Seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, assembly overview
- Rear seat rail covers, assembly overview
- Harness connectors, disconnecting
- VAS 6036 airbag adapter, connecting
- Side airbag connector, disconnecting
- Front backrest, assembly overview
- Side panels on door sill side, assembly overview
- Side panel on tunnel side, assembly overview
- Backrest (standard seat), assembly overview
- Seat pan (standard seat), assembly overview
- Guide for side-airbag, assembly overview
- Seat adjustment switch, removing and installing
- Four-way lumbar switch, removing and installing
- Control module, removing and installing
- Motor for seat length adjustment, assembly overview
- Motor for seat height adjustment, assembly overview
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension (sport seat), assembly overview
- Motor for backrest adjustment, assembly overview
- Backrest panel, assembly overview
- Backrest frame Assembly overview
- Four-way lumbar support, assembly overview
- Headrests with insertion lock, removing and installing
- Rear footwell light, removing and installing
- Spring mat with wiring harness in seat pan, assembly overview
- Cable assignment for seat
- Cable assignment for backrest
- Wiring harness in backrest, assembly overview
- Front Recaro seats
- Special tools and equipment
- Seat, removing and installing
- Seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Harness connectors, disconnecting
- Airbag adapter VAS 6036, connecting
- Connector for side airbag, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Side panel on tunnel side, removing and installing
- Drawer, removing and installing
- Guide for side-airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar switch, removing and installing
- Control module, removing and installing
- Motor for seat fore-aft adjustment, removing and installing
- Motor for seat height adjustment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing
- Motor for backrest adjustment, removing and installing
- Backrest panel, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Motors for lumbar adjustment, removing and installing
- Headrests with insertion lock, removing and installing
- Rear footwell light, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Cable assignment for seat
- Cable assignment for backrest
- Wiring harness for seatback, removing and installing
- Rear seats
- Seatbench, removing and installing
- Left 1/3 backrest, removing and installing
- Right 2/3 backrest, removing and installing
- Center armrest, removing and installing
- Back seat side bolster, assembly overview
- Center support, removing and installing
- Rear backrest outer fitting, removing and installing
- Headrests, removing and installing
- Headrests, removing and installing using insertion lock
- Fixed rear backrest, removing and installing
- Rear Recaro seats
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- Steering Column Switches
- Communication
- 91 - Communication
- Radio Systems
- General information
- Radio system overview
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- "Chorus" / "Concert" , removing and installing
- "Symphony" radio, removing and installing
- "Symphony II+" in transport mode, activating/deactivating
- CD Changer R41 , removing and installing
- iPod Baseplate R192 , removing and installing
- Speakers in doors, removing and installing
- Inside Loudspeaker R70 , removing and installing
- Bass Loudspeaker R100 , Sedan, removing and installing
- Bass Loudspeaker R100 , Avant, removing and installing
- Amplifier R12 , Sedan, removing and installing
- Amplifier R12 , Avant, removing and installing
- BOSE Amplifier R12 , Sedan, removing and installing
- BOSE Amplifier R12 , Avant, removing and installing
- Inside Microphone R74 , function test
- Inside Microphone R74 , removing and installing
- Antenna Amplifier R24 / Antenna Selection Control Module J515 , sedan, removing and installing
- Left Antenna Module R108 , Avant, removing and installing
- Satellite Radio Systems, USA
- General information
- Radio system overview
- Layout of communication system with Satellite Radio Systems
- Connectors and connector assignments
- Antenna amplifier connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Satellite Radio R146 , removing and installing, activating
- Radio, Telephone, Navigation System Antenna R52 , sedan, removing and installing
- Radio, Telephone, Navigation System Antenna R52 , Avant, removing and installing
- Telephone system
- General information
- Telephone systems, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Telephone Baseplate R126 , removing and installing
- Telephone Transceiver R36 , removing and installing
- Telephone Transceiver R36 (telephone, fixed installation), removing and installing
- Telephone Amplifier R86 , Sedan, removing and installing
- Telephone Amplifier R86 , Avant, removing and installing
- Telephone Microphone R38 , removing and installing
- Telephone Antenna R65 , Sedan, removing and installing
- Telephone Antenna R65 , Avant, removing and installing
- Telephone system - USA
- Navigation system IV (BNS 4.0)
- General information
- Navigation system BNS 4.0, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- Function Selector Switch II E272 , removing and installing
- Navigation System Antenna R50 , Sedan, removing and installing
- Navigation System Antenna R50 , Avant, removing and installing
- Navigation system II-D (Navigation System Plus)
- General information
- Error messages on screen
- Navigation system II-D, overview
- Connectors and connector assignments
- Total overview - Sedan component locations
- General overview - Avant component locations
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Navigation Interface R94 , Sedan, removing and installing
- Navigation Interface R94 , Avant, removing and installing
- Navigation/TV Tuner J415 , removing and installing
- Right Antenna Module R109 , Avant, removing and installing
- RNS-E navigation system
- General information
- Error messages on screen
- RNS-E navigation system, overview
- Navigation System with CD Drive Control Module J401 , harness connectors
- Navigation/TV Tuner J415 connections
- Total overview - Sedan component locations
- General overview - Avant component locations
- Navigation System with CD Drive Control Module J401 , removing and installing
- RNSE-E navigation system, USA
- RNS-JP3 navigation system, Japan
- General information
- RNS-JP3 navigation system, overview
- Connectors and connector assignments
- Component locations, general overview
- Operating Electronics, Navigation Control Module J402 , removing and installing
- Antenna Selection Control Module J515 , sedan, removing and installing - sedan
- Antenna Selection Control Module J515 , Avant, removing and installing
- RNS-JP4 navigation system, Japan
- RNS low navigation system
- Telematics
- General information
- On Board Diagnostic (OBD), function
- Audi Telematics by OnStar, functions
- Telematics System - Sedan, layout
- Telematics System - Avant, layout
- Telephone/Telematics Control Module J526 , multi-pin connector assignments
- Telematics System - Sedan, component overview
- Telematics System - Avant, component overview
- Service mode, activating/deactivating
- Telephone/Telematics Control Module J526 , removing and installing
- Telephone/Telematics Control Module J526 , replacing and configuring
- Emergency Battery (Telematics) A16 , switching on/off
- Emergency Battery (Telematics) A16 , removing and installing
- Antenna Splitter R87 - Avant, removing and installing
- Telematics Control Head E264 , removing and installing
- Telephone Microphone R38 , removing and installing
- Auxiliary Speaker (Telematics) R91 , removing and installing
- Telephone Antenna R65 - Sedan, removing and installing
- Telephone Antenna R65 and Telephone Antenna 2 R127 - Avant, removing and installing
- Roof antenna with Navigation System Antenna R50 and Auxiliary Antenna (Telematics) R90 , removing and installing
- GPS Antenna Splitter R110 - Avant, removing and installing
- Speech control system
- Multifunction Steering Wheel
- Steering Column Electronic Systems Control Module J527
- Electronic route book
- Radio Systems
- 91 - Communication
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Lights, Switches - Exterior - Cabriolet
- Headlights, servicing - Halogen headlights
- Headlights, servicing - High intensity gas discharge (Xenon) headlights
- Notes
- General overview
- Headlights, removing and installing:
- Headlights, adjusting
- Gas discharge light for low beam, replacing
- Light bulb for high beam, replacing
- Light bulb for turn signal/parking light, replacing
- Headlight beam adjusting motors, removing and installing
- Igniter for gas discharge lamps -N195-, removing and installing
- Repair kit for headlight housing, installing
- Fog lights, servicing
- Side mounted turn signals
- Rear lights, servicing
- High-mount brake light, servicing
- License plate light, servicing
- Steering Column Switch Module (SCSM)
- Notes
- General description
- Steering Column Switch Module (SCSM), removing and installing
- Steering Column Switch Module (SCSM), disassembling
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (front)
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (rear)
- Lock cylinder and Ignition/starter switch, servicing
- Headlight range control, servicing
- Lights, Switches - Exterior - Except Cabriolet
- Headlights, servicing
- Notes
- Halogen headlights, exploded view
- High intensity gas discharge (Xenon) headlights, exploded view
- Headlights, removing and installing
- Headlights, adjusting
- Dipped beam bulb (Halogen headlights), replacing
- Main beam bulb (Halogen headlights), replacing
- Bulb for dipped beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for high beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for turn signal/parking light, replacing
- Side light bulb (High intensity gas discharge (Xenon) headlights), replacing
- Ignitor for gas-discharge lamps -N195-, removing and installing
- Repair kit for headlight housing, installing
- Fog lights, servicing
- Side mounted turn signals
- Rear lights, servicing
- High-mount brake light, servicing
- License plate light, servicing
- Steering Column Switch Module (SCSM)
- Notes
- General description
- Steering Column Switch Module (SCSM), removing and installing
- Steering Column Switch Module (SCSM), disassembling
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (front)
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (rear)
- Lock cylinder and ignition/starter switch, servicing
- Parking aid, servicing
- Notes
- Parking aid, exploded view
- Control module for parking aid -J446-, removing and installing
- Front parking aid warning buzzer -H22- (8-channel parking aid), removing and installing
- Warning buzzer for parking -H15- (sedan), removing and installing
- Warning buzzer for parking -H15- (Avant), removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Headlight range control, servicing
- Headlights, servicing
- Steering
- Steering column
- Power steering gear
- Power steering gear, adjusting
- Tie rods
- Power steering
- Power steering fluid level, checking
- Power steering system, bleeding
- Power steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 4-cyl. engine and 6-cyl. diesel engines)
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 6-cyl. engine)
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Steering Column Module, Multi-Function Steering Wheel - Cabriolet
- Steering Column Module, Multi-Function Steering Wheel - Except Cabriolet
- Steering Column Electronic Systems Control Module
- Multi-function steering wheel
- Communication
- Warning Systems
- Lights, Switches - Exterior - Except Cabriolet
- Headlights, servicing
- Notes
- Halogen headlights, exploded view
- High intensity gas discharge (Xenon) headlights, exploded view
- Headlights, removing and installing
- Headlights, adjusting
- Dipped beam bulb (Halogen headlights), replacing
- Main beam bulb (Halogen headlights), replacing
- Bulb for dipped beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for high beam (High intensity gas discharge (Xenon) headlights), replacing
- Light bulb for turn signal/parking light, replacing
- Side light bulb (High intensity gas discharge (Xenon) headlights), replacing
- Ignitor for gas-discharge lamps -N195-, removing and installing
- Repair kit for headlight housing, installing
- Fog lights, servicing
- Side mounted turn signals
- Rear lights, servicing
- High-mount brake light, servicing
- License plate light, servicing
- Steering Column Switch Module (SCSM)
- Notes
- General description
- Steering Column Switch Module (SCSM), removing and installing
- Steering Column Switch Module (SCSM), disassembling
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (front)
- Terminal assignment at Steering Column Electronic Systems Control Module -J527- (rear)
- Lock cylinder and ignition/starter switch, servicing
- Parking aid, servicing
- Notes
- Parking aid, exploded view
- Control module for parking aid -J446-, removing and installing
- Front parking aid warning buzzer -H22- (8-channel parking aid), removing and installing
- Warning buzzer for parking -H15- (sedan), removing and installing
- Warning buzzer for parking -H15- (Avant), removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Headlight range control, servicing
- Headlights, servicing
- Lights, Switches - Exterior - Except Cabriolet
- Window Motors & Regulators
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Front Doors Central Locking System - Except Cabriolet
- Front door
- Window frame and window lifter, assembly overview
- Window frame and window lifter, removing and installing
- Window lifter and door window, assembly overview
- Window lifter motor, removing and installing
- Front door, adjusting
- Adjusting in relation to body contour
- Front door, adjustment dimensions
- Front door handle and door lock, assembly overview
- Door handle, assembly overview
- Door handle, removing and installing
- Door handle mount and trim panel, removing and installing
- Door lock, removing and installing
- Central locking
- Front door
- Body Exterior
- Wiper/Washer Systems
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Windshield Wiper Washer System - Cabriolet
- Windshield Wiper Washer System - Except Cabriolet
- Front windshield wiper system, servicing
- Front windshield washer system, servicing
- Rear windshield wiper and washer system, servicing (Avant)
- Headlight washer system, servicing
- Electrical Equipment
- Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.)
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment
- Accessories Control Systems
- Body & Frame
- Door Locks
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Front Doors Central Locking System - Cabriolet
- Front door
- Window regulator, assembly overview
- Window regulator motor, removing and installing
- Front door, adjusting
- Lower door hinge, assembly overview
- Door window, assembly overview
- Front door handle and door lock, assembly overview
- Lock cylinder, assembly overview
- Door handle, assembly overview
- Door lock, assembly overview
- Rear window
- Convenience system
- Component locations
- Notes
- Passenger-side door control unit -J387-
- -G305- transmitter/receiver module 2 for interior monitor
- Right rear window regulator motor -V27-
- Alarm horn -H12-
- Fuel tank flap release motor -V155-
- Boot lid release motor -V139-
- Rear window regulator motor -V26-
- -G303- transmitter/receiver module 1 for interior monitor
- Driver's side door control unit -J386-
- Convenience system central control unit -J393-
- Contact switch for hood -F266-
- Fuel tank flap release motor, removing and installing
- Component locations
- Front door
- Front Doors Central Locking System - Except Cabriolet
- Front door
- Window frame and window lifter, assembly overview
- Window frame and window lifter, removing and installing
- Window lifter and door window, assembly overview
- Window lifter motor, removing and installing
- Front door, adjusting
- Adjusting in relation to body contour
- Front door, adjustment dimensions
- Front door handle and door lock, assembly overview
- Door handle, assembly overview
- Door handle, removing and installing
- Door handle mount and trim panel, removing and installing
- Door lock, removing and installing
- Central locking
- Front door
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Switches, servicing
- Notes
- Switch in center console, removing and installing
- Front seat heating switch, removing and installing
- Light switch, removing and installing
- Glove box light, removing and installing
- Switch for convertible top operation/navigation, removing and installing
- Mirror adjuster switch, removing and installing
- Window regulator switch, removing and installing
- Door contact switch, removing and installing
- Front central locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch, removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light/reading light, replacing
- Luggage compartment lights, removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- 12 V power outlet in luggage compartment, removing and installing
- Horn, servicing
- Switches, servicing
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Body Exterior
- Exterior Body Panels
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Body Front - Cabriolet
- Body Front - Except Cabriolet
- Front body
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier, assembly overview
- Lock carrier, moving to service position
- Cowl panel trim, assembly overview
- Transverse support (dome brace), removing and installing
- Front fender, assembly overview
- Closure plate, removing and installing
- Noise insulation, assembly overview
- Front body
- Bumpers - Cabriolet
- Bumpers - Except Cabriolet
- Front bumper
- Front bumper, assembly overview
- Side impact moldings, centering holes
- Front bumper, removing and installing
- Bumper to impact absorber, assembly overview
- Guide piece, removing and installing
- Crossmember, removing from bumper cover and installing
- Two-piece bumper cover, separating
- Impact absorber, removing and installing
- Rear bumper
- Bumper cover (sedan), assembly overview
- Centering holes for side impact moldings
- Bumper cover (Avant), assembly overview
- Guide piece, removing and installing
- Crossmember for bumper, assembly overview
- Crossmember for bumper (USA vehicles), assembly overview
- Crossmember for bumper (vehicles with trailer hitch), assembly overview
- Front bumper
- Exterior Equipment - Cabriolet
- Exterior Equipment - Except Cabriolet
- Front Doors Central Locking System - Cabriolet
- Front door
- Window regulator, assembly overview
- Window regulator motor, removing and installing
- Front door, adjusting
- Lower door hinge, assembly overview
- Door window, assembly overview
- Front door handle and door lock, assembly overview
- Lock cylinder, assembly overview
- Door handle, assembly overview
- Door lock, assembly overview
- Rear window
- Convenience system
- Component locations
- Notes
- Passenger-side door control unit -J387-
- -G305- transmitter/receiver module 2 for interior monitor
- Right rear window regulator motor -V27-
- Alarm horn -H12-
- Fuel tank flap release motor -V155-
- Boot lid release motor -V139-
- Rear window regulator motor -V26-
- -G303- transmitter/receiver module 1 for interior monitor
- Driver's side door control unit -J386-
- Convenience system central control unit -J393-
- Contact switch for hood -F266-
- Fuel tank flap release motor, removing and installing
- Component locations
- Front door
- Front Doors Central Locking System - Except Cabriolet
- Front door
- Window frame and window lifter, assembly overview
- Window frame and window lifter, removing and installing
- Window lifter and door window, assembly overview
- Window lifter motor, removing and installing
- Front door, adjusting
- Adjusting in relation to body contour
- Front door, adjustment dimensions
- Front door handle and door lock, assembly overview
- Door handle, assembly overview
- Door handle, removing and installing
- Door handle mount and trim panel, removing and installing
- Door lock, removing and installing
- Central locking
- Front door
- Hood, Lids - Except Cabriolet
- Hood
- Rear lid
- Tailgate (Avant)
- Tailgate, removing and installing
- Insulation mat to rear lid, adhering
- Tailgate, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Tailgate seal, removing and installing
- Rear lid, adjustment dimensions
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Tailgate lock, removing and installing
- Rear lid lock actuator, removing and installing
- Rear Doors
- Rear door
- Window frame and window lifter, removing and installing
- Window lifter and door window, assembly overview
- Window lifter and door window, removing and installing
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Rear door window frame, adjustment dimensions
- Rear door handle and door lock, assembly overview
- Door handle, removing and installing
- Door lock, removing and installing
- Rear door
- Body Exterior
- Exterior/Interior Trim
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Interior Equipment - Except Cabriolet
- Storage compartments and covers
- Glove compartment, assembly overview
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Brake for glove compartment cover, removing and installing (vehicles with knee bolster)
- Driver-side storage compartment (with and without knee bolster), assembly overview
- Instrument cluster, removing
- Center armrest, assembly overview
- Support foot for center armrest, removing and installing
- Center console, assembly overview
- Cassette storage compartment, assembly overview
- Shift cover and shifter boot, assembly overview
- Navigation control head from center console, assembly overview
- Cigarette lighter from center console, assembly overview
- Footwell trim, removing and installing
- Trim on parking brake lever, assembly overview
- Parking brake lever handle, removing
- Cellular phone holder in center console, assembly overview
- Holes for cellular phone holder on center console, drilling
- Holder for telephone handset on center console, assembly overview
- Holes for telephone handset holder on center console, drilling
- Center part of instrument panel, assembly overview
- Beverage holder and storage compartment, removing and installing
- Switch strip cover and trim, assembly overview
- Front ashtray, assembly overview
- Rear ashtray, assembly overview
- Interior rear view mirror
- Interior rear view mirror, removing and installing
- Interior rear view mirror, removing (automatic day/night mirror, interior rear view mirror with compass)
- Automatic day/night interior rear view mirror, removing
- Automatic day/night interior rear view mirror, testing function
- Interior rear view mirror with compass (only USA), calibrating
- Retaining plate for interior rear view mirror, adhering
- Storage compartments and covers
- Interior Trim - Cabriolet
- Front door trims
- Component locations, assembly overview
- Door trim, assembly overview
- Trim, removing and installing
- Insulation, assembly overview
- Routing of wiring in door trim, assembly overview
- Armrest, removing and installing
- Central locking switch, removing and installing
- Mirror adjustment switch, removing and installing
- Interior door handle, removing and installing
- Switch panel for window regulator, removing and installing
- Switch panel for memory seat, removing and installing
- Switch panel for tailgate release and/or deactivation of anti-theft alarm, assembly overview
- Door warning light and courtesy light, removing and installing
- Treble loudspeaker, removing and installing
- Trim of bass loudspeaker, removing and installing
- Rear side trim
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Special tools and equipment
- Removing
- Remove left instrument panel cover
- Removing left instrument panel end mounting
- Detaching connectors on vent temperature sensor -G150- and -G151-
- Removing instrument panel vent
- Removing left and right instrument panel loudspeaker
- Removing and installing tray, switch and cup holder
- Removing light switch and adjuster for headlight range control
- Removing left instrument panel trim
- Removing instrument panel mountings driver's side.
- Removing upper steering column switch trim
- Removing sunlight penetration photosensor -G107-
- Removing trim for center defroster vent
- Removing center instrument panel loudspeaker
- Removing trim for right instrument panel cover.
- Removing right instrument panel cover
- Removing right instrument panel end mountings.
- Removing center instrument panel mountings
- Installing
- Left and/or right instrument panel air duct, removing and installing
- Central tube
- Trims
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Floor covering, assembly overview
- Sill panel trim, removing and installing
- Foot rest, removing and installing
- Foot rest holder, removing and installing
- Sun visor, removing and installing
- Sun visor mount, removing and installing
- Center sun visor, removing and installing
- Windshield trim, assembly overview
- Make-up mirror light, removing and installing
- Interior light / reading light, removing and installing
- Luggage compartment trim
- Trim for convertible top compartment
- Variable convertible top compartment
- Variable convertible top compartment, removing and installing
- Convertible top compartment lid, assembly overview
- Handle mount trim, assembly overview
- Handle for variable convertible top compartment, removing and installing
- Microswitch for variable convertible top compartment, removing and installing
- Toothed segment of variable convertible top compartment, removing and installing
- Rack of variable convertible top compartment, removing and installing
- Guide rail of variable convertible top compartment, removing and installing
- Console of variable convertible top compartment, assembly overview
- Front door trims
- Interior Trim - Except Cabriolet
- Front door trim
- Component locations, assembly overview
- Front door trim components, assembly overview
- Armrest, assembly overview
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Cable routing and door trim, assembly overview
- Door warning light and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, assembly overview
- Rear door trim, assembly overview
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, assembly overview
- Cable routing and door trim, assembly overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door handle, removing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Upper trim for steering column switches, removing
- Notes
- Center defroster outlet, removing
- Instrument panel speaker, removing
- Left instrument panel cover, removing
- Right instrument panel cover, removing
- Left trim for instrument panel, removing and installing
- Right trim for instrument panel, removing and installing
- Left and right instrument panel vents, removing and installing
- Left and right instrument panel air guides, removing and installing
- Removing
- Center instrument panel vent, removing and installing
- Cross member
- Roof trim (sedan)
- Roof trim (Avant)
- Trim
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, assembly overview
- Lower B-pillar trim, assembly overview
- C-pillar trim, assembly overview
- D-pillar trim, assembly overview
- Roof end, assembly overview
- Wheelhousing trim, assembly overview
- Rear shelf, assembly overview
- Rear lid trim, assembly overview
- Rear cross panel trim, assembly overview
- Luggage compartment side trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear panel trim, assembly overview
- Rear panel sill, assembly overview
- Dirt tray, assembly overview
- Luggage compartment floor mat, assembly overview
- Floor mat, assembly overview
- Trim (Avant)
- C-pillar trim, assembly overview
- Trim above rear door, assembly overview
- D-pillar trim, assembly overview
- Roof end trim, assembly overview
- Rear lid trim, assembly overview
- Side luggage compartment trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear power outlet, removing and installing
- Partition grille, assembly overview
- Rear cross panel trim, assembly overview
- Storage area floor, assembly overview
- Dirt tray, assembly overview
- Console tie-downs, assembly overview
- Front door trim
- Body Exterior
- Ignition Switch/Steering Lock
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment
- Mirrors
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- Exterior Equipment - Cabriolet
- Exterior Equipment - Except Cabriolet
- Interior Equipment - Except Cabriolet
- Storage compartments and covers
- Glove compartment, assembly overview
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Brake for glove compartment cover, removing and installing (vehicles with knee bolster)
- Driver-side storage compartment (with and without knee bolster), assembly overview
- Instrument cluster, removing
- Center armrest, assembly overview
- Support foot for center armrest, removing and installing
- Center console, assembly overview
- Cassette storage compartment, assembly overview
- Shift cover and shifter boot, assembly overview
- Navigation control head from center console, assembly overview
- Cigarette lighter from center console, assembly overview
- Footwell trim, removing and installing
- Trim on parking brake lever, assembly overview
- Parking brake lever handle, removing
- Cellular phone holder in center console, assembly overview
- Holes for cellular phone holder on center console, drilling
- Holder for telephone handset on center console, assembly overview
- Holes for telephone handset holder on center console, drilling
- Center part of instrument panel, assembly overview
- Beverage holder and storage compartment, removing and installing
- Switch strip cover and trim, assembly overview
- Front ashtray, assembly overview
- Rear ashtray, assembly overview
- Interior rear view mirror
- Interior rear view mirror, removing and installing
- Interior rear view mirror, removing (automatic day/night mirror, interior rear view mirror with compass)
- Automatic day/night interior rear view mirror, removing
- Automatic day/night interior rear view mirror, testing function
- Interior rear view mirror with compass (only USA), calibrating
- Retaining plate for interior rear view mirror, adhering
- Storage compartments and covers
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Switches, servicing
- Notes
- Switch in center console, removing and installing
- Front seat heating switch, removing and installing
- Light switch, removing and installing
- Glove box light, removing and installing
- Switch for convertible top operation/navigation, removing and installing
- Mirror adjuster switch, removing and installing
- Window regulator switch, removing and installing
- Door contact switch, removing and installing
- Front central locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch, removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light/reading light, replacing
- Luggage compartment lights, removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- 12 V power outlet in luggage compartment, removing and installing
- Horn, servicing
- Switches, servicing
- Body On Board Diagnostic (OBD)
- Seats
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- On Board Diagnostic (OBD) - Driver's Seat Adjustment With Memory
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- On Board Diagnostic (OBD), initiating program
- On Board Diagnostic (OBD) functions
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- Seats Frames - Cabriolet
- Front seats (memory seat, electric seat)
- Tools
- Front seat, assembly overview
- Front seat with faulty forward and backward seat adjustment motor or defective control unit, removing and installing
- Front seat rail cover, assembly overview
- Rear seat rail cover, assembly overview
- Connectors, disconnecting
- VAS 6036 Airbag adapter, connecting
- Connector assignment for connection point
- Connector for side airbag, detaching
- Front seat backrest, assembly overview
- Side trims (outboard side), assembly overview
- Side trim, inboard side, assembly overview
- Easy-entry facility, removing and installing
- Bowden cable for backrest lock, assembly overview
- Microswitch for seatback release, assembly overview
- Microswitch for seatback release, adjusting
- Microswitch for headrest, assembly overview
- Microswitch for headrest, adjusting
- Backrest (standard seat), replacing
- Seat pan (standard seat), replacing
- Guide for side airbag, assembly overview
- Seat adjustment switch, removing and installing
- Switch for 4-way lumbar support, removing and installing
- Control unit, removing and installing
- Forward and backward seat adjustment motor, assembly overview
- Seat height adjustment motor, assembly overview
- Seat cushion extension (sports seat), assembly overview
- Motor for backrest inclination adjustment, assembly overview
- Backrest cover panel, assembly overview
- Backrest frame, assembly overview
- 4-way lumbar support, assembly overview
- Lumbar support adjustment motors, assembly overview
- Head restraint, removing and installing
- Rear footwell light, removing
- Seat pan spring pad with wiring harness, assembly overview
- Seat wiring assignment
- Backrest wiring assignment
- Seat backrest wiring harness, assembly overview
- Rear seats
- Front seats (memory seat, electric seat)
- Seats Frames - Except Cabriolet
- Front seats
- Front seats (power seat with memory)
- Notes
- Tools
- Seat, assembly overview
- Seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, assembly overview
- Rear seat rail covers, assembly overview
- Harness connectors, disconnecting
- VAS 6036 airbag adapter, connecting
- Side airbag connector, disconnecting
- Front backrest, assembly overview
- Side panels on door sill side, assembly overview
- Side panel on tunnel side, assembly overview
- Backrest (standard seat), assembly overview
- Seat pan (standard seat), assembly overview
- Guide for side-airbag, assembly overview
- Seat adjustment switch, removing and installing
- Four-way lumbar switch, removing and installing
- Control module, removing and installing
- Motor for seat length adjustment, assembly overview
- Motor for seat height adjustment, assembly overview
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension (sport seat), assembly overview
- Motor for backrest adjustment, assembly overview
- Backrest panel, assembly overview
- Backrest frame Assembly overview
- Four-way lumbar support, assembly overview
- Headrests with insertion lock, removing and installing
- Rear footwell light, removing and installing
- Spring mat with wiring harness in seat pan, assembly overview
- Cable assignment for seat
- Cable assignment for backrest
- Wiring harness in backrest, assembly overview
- Front Recaro seats
- Special tools and equipment
- Seat, removing and installing
- Seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Harness connectors, disconnecting
- Airbag adapter VAS 6036, connecting
- Connector for side airbag, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Side panel on tunnel side, removing and installing
- Drawer, removing and installing
- Guide for side-airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar switch, removing and installing
- Control module, removing and installing
- Motor for seat fore-aft adjustment, removing and installing
- Motor for seat height adjustment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing
- Motor for backrest adjustment, removing and installing
- Backrest panel, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Motors for lumbar adjustment, removing and installing
- Headrests with insertion lock, removing and installing
- Rear footwell light, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Cable assignment for seat
- Cable assignment for backrest
- Wiring harness for seatback, removing and installing
- Rear seats
- Seatbench, removing and installing
- Left 1/3 backrest, removing and installing
- Right 2/3 backrest, removing and installing
- Center armrest, removing and installing
- Back seat side bolster, assembly overview
- Center support, removing and installing
- Rear backrest outer fitting, removing and installing
- Headrests, removing and installing
- Headrests, removing and installing using insertion lock
- Fixed rear backrest, removing and installing
- Rear Recaro seats
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- Sun Roof/T-Top/Convertible Top
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Convertible Tops
- Convertible top, repairing
- Safety regulations
- Convertible top, assembly overview
- Convertible top, removing
- Convertible top, installing
- Convertible top, adjusting
- Convertible top lock, removing and installing
- Side windows, adjusting
- Convertible top seals, removing and installing
- Convertible top headliner, removing
- Convertible top headliner, installing
- Convertible top cover, removing
- Convertible top cover, installing
- Convertible top cushion, removing
- Convertible top cushion, installing
- Convertible top emergency release
- Hydraulic system for convertible top
- General information on hydraulic system
- Rules for cleanliness
- Hydraulic system, assembly overview
- Hydraulic system, filling and bleeding
- Hydraulic unit (hydraulic pump), removing and installing
- Hydraulic pump housing, removing and installing
- Pump gear, removing and installing
- Solenoid valve, removing and installing
- Hydraulic lines, removing and installing
- Hydraulic lines at the fitting plate, removing and installing
- Hydraulic pump connection chart
- Hydraulic cylinder, removing and installing
- Convertible top frame
- Convertible top box lid, locking mechanism
- Electrical components of convertible top actuation
- Safety regulations
- Assembly overview
- Electrical components for convertible top operation, removing and installing
- Notes
- Removing convertible top locking mechanism (Motor -V223-/switch -F294-/switch -F295-)
- Removing convertible top position switch (switch -F171-/switch -F202-)
- Removing tensioning bar position sensor -G356-
- Removing upper convertible top box lid switch -F201-
- Removing convertible top operation control module -J256-
- Removing left -F290- and right -F200-convertible top box lid switches
- Removing front convertible top lock switch -F172-
- Removing convertible top operation button -E137-
- Convertible top, repairing
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Sunroof
- Sunroof
- Sunroof, assembly overview
- Wind deflector, removing and installing
- Sunroof panel components, assembly overview
- Sunroof panel, removing and installing
- Upper and lower trim strips, removing and installing
- Sunroof glass panel, removing
- Sunroof glass panel, adjusting
- Glass panel seal, replacing
- Adjusting motor zero setting
- Zero setting of guide plate, checking and adjusting
- Water drain hoses
- Sunroof
- Body Exterior
- Windows
- Body Exterior
- 50 Body, front
- 55 Hood, lids
- Hood
- Rear lid (Sedan)
- Rear lid (Avant)
- Rear lid, removing and installing
- Insulation mat to rear lid, adhering
- Rear lid, adjusting
- Rear lid hinge, removing and installing
- Gas-filled strut for rear lid, removing and installing
- Rear lid seal, removing and installing
- Adjustment dimensions for rear lid
- Lock cylinder for rear lid, removing and installing
- Handle mechanism for rear lid, removing and installing
- Rear lid lock, removing and installing
- Rear lid lock actuator, removing and installing
- Fuel filler flap
- 57 Front doors/door components/central locking system
- Front door
- Window frame and window regulator, removing and installing
- Door window, removing from window regulator
- Motor for window regulator, removing and installing
- Front door, adjusting
- Adjusting using door adjustment template T40038/1
- Panel gap dimensions
- Window frame, adjusting
- Window frame installation
- Adjustment dimensions for front door window frame
- Door handle and door lock - front, assembly overview
- Door handle, removing
- Door lock, removing
- Central locking system
- Front door
- 58 Rear doors/door components
- Rear doors
- Window frame and window regulator, removing and installing
- Window regulator and door window, separating
- Motor for window regulator, removing and installing
- Manual window regulators, removing and installing
- Rear door, adjusting
- Adjustment dimensions for rear door window frame
- Adjusting using Door adjustment template T40038/1
- Panel gap dimensions
- Door handle and door lock - rear, assembly overview
- Door handle, removing
- Door lock, removing
- Rear doors
- 60 Sunroof
- Sunroof, servicing
- Assembly overview
- Wind deflector, removing and installing
- Sunroof panel, removing and installing (assembly overview)
- Sunroof headliner, removing and installing
- Trim, removing and installing
- Boot, removing and installing (vehicles as of CW 27/2002 >)
- Sunroof panel, removing
- Sunroof panel, adjusting
- Panel seal, replacing
- "Zero" position (link guide), adjusting
- "Zero" position of sunroof motor (link guide), checking and adjusting
- Water drain hoses
- Sunroof, servicing
- 63 Bumper
- Front bumper
- Front bumper, removing and installing
- Radiator grille, removing and installing
- Centering holes for side impact moldings
- Bumper, mounting to shock absorber
- Guide piece, removing and installing
- Crossmember, removing from cover and installing
- Two-piece bumper cover, separating
- Shock absorber, removing and installing
- Rear bumper (Sedan)
- Rear bumper (Avant)
- Front bumper
- 64 Glass
- 66 Exterior equipment
- Roof moldings
- Roof rail
- Protective moldings
- Face plates
- Window weatherstrips
- Window weatherstrips for front door (standard vehicle), removing and installing
- Front window weatherstrips (vehicles with gloss package), removing and installing
- Window weatherstrips for rear door (standard vehicle), removing and installing
- Rear window weatherstrips (vehicles with gloss package), removing and installing
- Outside rear view mirror
- Outer sill panel trim
- Sill panel cover, removing and installing
- Underbody covers
- Wheelhousing liner, removing and installing
- Ornamental parts
- Ornamental parts, as of Vehicle Identification Number (VIN) 400 001
- Rear lid spoiler, removing and installing
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Front Doors Central Locking System - Except Cabriolet
- Front door
- Window frame and window lifter, assembly overview
- Window frame and window lifter, removing and installing
- Window lifter and door window, assembly overview
- Window lifter motor, removing and installing
- Front door, adjusting
- Adjusting in relation to body contour
- Front door, adjustment dimensions
- Front door handle and door lock, assembly overview
- Door handle, assembly overview
- Door handle, removing and installing
- Door handle mount and trim panel, removing and installing
- Door lock, removing and installing
- Central locking
- Front door
- Body Exterior
- Door Locks
- Brakes
- Anti-Lock Brakes
- Anti-Lock Brake System
- Anti-lock brake system, general information
- ABS/ESP system, component overview
- Anti-lock Brake System (ABS) Bosch 5.7
- ABS/ESP system components, removing and installing
- ABS system components on front axle, removing and installing
- ABS system components on rear axle (FWD models), removing and installing
- ABS system components on rear axle (AWD models), removing and installing
- Brake System
- 00 - General, Technical Data
- 45 - Anti-lock brake system
- Information for repair work on ABS
- ABS/ESP system, component overview
- Anti-lock brake system (ABS) Bosch 5.7
- Anti-lock brake system (ABS) Bosch 8.0
- ABS system components on front axle, removing and installing
- ABS system components on rear axle (FWD vehicles), removing and installing
- ABS system components on rear axle (AWD vehicles), removing and installing
- ABS/ESP system components, removing and installing
- Brake pressure sensor 1 G201 , removing and installing
- 46 - Brakes - Mechanical components
- Front brakes C54
- Front brakes FN3
- Front brakes FNR-G60
- Front brakes, Brembo 18
- Rear brakes C38
- Rear brakes C41/C43
- Rear brakes, RS4 (model 8EC)/C43
- Parking brake cables (FWD vehicles), removing and installing
- Parking brake cables (AWD vehicles), removing and installing
- Parking brake lever with under tray, removing and installing
- Parking brake handle, removing and installing
- Brake pedal, assembly overview
- Brake pedal bracket, removing and installing
- 47 - Brakes - Hydraulic components
- Pressurized leak test
- Brake caliper C54
- Brake caliper FN3
- Brake caliper FNR-G60
- Brake caliper, Brembo 18
- Rear brake caliper C38
- Brake system, bleeding
- Tandem brake booster/brake master cylinder, assembly overview
- Brake master cylinder with brake booster, removing and installing
- Brake system vacuum pump V192
- Electric vacuum pump
- Brake hoses and brake lines
- Anti-Lock Brake System
- Mechanical - Hydraulic
- Brake System
- 00 - General, Technical Data
- 45 - Anti-lock brake system
- Information for repair work on ABS
- ABS/ESP system, component overview
- Anti-lock brake system (ABS) Bosch 5.7
- Anti-lock brake system (ABS) Bosch 8.0
- ABS system components on front axle, removing and installing
- ABS system components on rear axle (FWD vehicles), removing and installing
- ABS system components on rear axle (AWD vehicles), removing and installing
- ABS/ESP system components, removing and installing
- Brake pressure sensor 1 G201 , removing and installing
- 46 - Brakes - Mechanical components
- Front brakes C54
- Front brakes FN3
- Front brakes FNR-G60
- Front brakes, Brembo 18
- Rear brakes C38
- Rear brakes C41/C43
- Rear brakes, RS4 (model 8EC)/C43
- Parking brake cables (FWD vehicles), removing and installing
- Parking brake cables (AWD vehicles), removing and installing
- Parking brake lever with under tray, removing and installing
- Parking brake handle, removing and installing
- Brake pedal, assembly overview
- Brake pedal bracket, removing and installing
- 47 - Brakes - Hydraulic components
- Pressurized leak test
- Brake caliper C54
- Brake caliper FN3
- Brake caliper FNR-G60
- Brake caliper, Brembo 18
- Rear brake caliper C38
- Brake system, bleeding
- Tandem brake booster/brake master cylinder, assembly overview
- Brake master cylinder with brake booster, removing and installing
- Brake system vacuum pump V192
- Electric vacuum pump
- Brake hoses and brake lines
- Brakes Hydraulic Components - Electric Brake System Vacuum Pump
- Electric brake system vacuum pump -V192-
- Electric brake system vacuum pump
- Disc Brakes
- Identification
- Description & Operation
- Bleeding Brake System
- Adjustments
- Troubleshooting
- Removal & Installation
- Overhaul
- Torque Specifications
- Disc Brake Specifications
- Brake System
- Parking Brake System
- 00 - General, Technical Data
- 45 - Anti-lock brake system
- Information for repair work on ABS
- ABS/ESP system, component overview
- Anti-lock brake system (ABS) Bosch 5.7
- Anti-lock brake system (ABS) Bosch 8.0
- ABS system components on front axle, removing and installing
- ABS system components on rear axle (FWD vehicles), removing and installing
- ABS system components on rear axle (AWD vehicles), removing and installing
- ABS/ESP system components, removing and installing
- Brake pressure sensor 1 G201 , removing and installing
- 46 - Brakes - Mechanical components
- Front brakes C54
- Front brakes FN3
- Front brakes FNR-G60
- Front brakes, Brembo 18
- Rear brakes C38
- Rear brakes C41/C43
- Rear brakes, RS4 (model 8EC)/C43
- Parking brake cables (FWD vehicles), removing and installing
- Parking brake cables (AWD vehicles), removing and installing
- Parking brake lever with under tray, removing and installing
- Parking brake handle, removing and installing
- Brake pedal, assembly overview
- Brake pedal bracket, removing and installing
- 47 - Brakes - Hydraulic components
- Pressurized leak test
- Brake caliper C54
- Brake caliper FN3
- Brake caliper FNR-G60
- Brake caliper, Brembo 18
- Rear brake caliper C38
- Brake system, bleeding
- Tandem brake booster/brake master cylinder, assembly overview
- Brake master cylinder with brake booster, removing and installing
- Brake system vacuum pump V192
- Electric vacuum pump
- Brake hoses and brake lines
- Traction Control
- Anti-Lock Brake System
- Anti-lock brake system, general information
- ABS/ESP system, component overview
- Anti-lock Brake System (ABS) Bosch 5.7
- ABS/ESP system components, removing and installing
- ABS system components on front axle, removing and installing
- ABS system components on rear axle (FWD models), removing and installing
- ABS system components on rear axle (AWD models), removing and installing
- Brake System
- 00 - General, Technical Data
- 45 - Anti-lock brake system
- Information for repair work on ABS
- ABS/ESP system, component overview
- Anti-lock brake system (ABS) Bosch 5.7
- Anti-lock brake system (ABS) Bosch 8.0
- ABS system components on front axle, removing and installing
- ABS system components on rear axle (FWD vehicles), removing and installing
- ABS system components on rear axle (AWD vehicles), removing and installing
- ABS/ESP system components, removing and installing
- Brake pressure sensor 1 G201 , removing and installing
- 46 - Brakes - Mechanical components
- Front brakes C54
- Front brakes FN3
- Front brakes FNR-G60
- Front brakes, Brembo 18
- Rear brakes C38
- Rear brakes C41/C43
- Rear brakes, RS4 (model 8EC)/C43
- Parking brake cables (FWD vehicles), removing and installing
- Parking brake cables (AWD vehicles), removing and installing
- Parking brake lever with under tray, removing and installing
- Parking brake handle, removing and installing
- Brake pedal, assembly overview
- Brake pedal bracket, removing and installing
- 47 - Brakes - Hydraulic components
- Pressurized leak test
- Brake caliper C54
- Brake caliper FN3
- Brake caliper FNR-G60
- Brake caliper, Brembo 18
- Rear brake caliper C38
- Brake system, bleeding
- Tandem brake booster/brake master cylinder, assembly overview
- Brake master cylinder with brake booster, removing and installing
- Brake system vacuum pump V192
- Electric vacuum pump
- Brake hoses and brake lines
- Anti-Lock Brake System
- Anti-Lock Brakes
- Drivelines & Axles
- Axle Shafts
- Axle Shafts - Front & Rear
- Description & Operation
- Lubrication
- Removal & Installation
- Overhaul
- Torque Specifications
- Special Tools
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Axle Shafts - Front & Rear
- Differentials & Drive Axles
- 6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing
- 00 - Technical data
- 34 - Controls, housing
- Transmission, disassembling and assembling
- Overview
- Assembly overview
- Torsen housing and torsen differential, removing and installing - assembly overview
- Transmission cover and selector shaft, removing and installing
- First, second and reverse gears, removing and installing - assembly overview
- Input shaft, hollow shaft, drive pinion and selector rods, removing and installing - assembly overview
- Assembly sequence
- Notes
- Transmission, disassembling
- Transmission, assembling
- Notes
- Synchronizer rings for 1st, 2nd and reverse gears, checking for wear
- Differentiation of reverse gear synchronization rings - A - and 1st/2nd gear - B -
- Installation location of synchronizer rings for 1st and 2nd gear as well as reverse gear
- 1st and 2nd gear locking collar installation location
- Assembly of locking collar/synchronizer hub for 1st and 2nd gear
- Assemble locking collar and reverse gear selector gear
- Determine thickness of circlip - 1 - and shim(s) - 2 - as follows:
- Input shaft grooved ball bearing, replacing in uninstalled but not disassembled transmission
- Torsen housing, disassembling and assembling
- Torsen housing, disassembling and assembling
- Notes
- Press off flange shaft (torsen housing with vibration dampener)
- Press off flange shaft (torsen housing without vibration dampener)
- Pressing in flange shaft
- As of serial number 42987 - Flange shaft with nut - arrow A - and sealing ring with additional dust lip - arrow B -
- Pry off sealing ring
- Differentiation of sealing rings
- Sealing ring - up to serial number 42986 - installing
- Sealing ring - as of serial number 42987 - with additional dust lip, installing
- Pressing out ball bearing for flange shaft
- Pressing in ball bearing for flange shaft
- Torsen housing, disassembling and assembling
- Transmission cover, servicing
- Transmission cover, servicing
- Notes
- Press needle bearing out of transmission cover
- Press needle bearing into transmission cover
- Remove ball sleeve from transmission housing
- Press ball sleeve into transmission cover
- Ball sleeve press-in depth in transmission cover
- Remove roller sleeve from transmission cover
- Carefully press new roller sleeve into transmission cover to stop.
- Secure needle bearing and roller housing in transmission cover with peen
- Transmission cover, servicing
- Transmission housing, servicing
- Transmission housing, servicing
- Notes
- Remove input shaft needle bearing from transmission housing
- Drive input shaft needle bearing into transmission housing
- Measure needle bearing drive-in depth and secure needle bearing with peening
- Remove selector shaft ball sleeve
- Drive on selector shaft ball sleeve and secure with peening
- Breather tube installation dimension
- Selector shaft sealing ring, removing from disassembled transmission
- Selector shaft sealing ring, removing from assembled transmission
- Selector shaft ball sleeve, driving on
- Driving in selector shaft seal
- Input shaft grooved ball bearing, removing from disassembled transmission
- Drive input shaft grooved ball bearing in to stop
- Remove selector rod ball sleeve - C -
- Drive in selector rod ball sleeve
- Drive-in depth for ball sleeves in transmission housing
- Transmission housing, servicing
- Transmission, disassembling and assembling
- 35 - Gears, shafts
- Input shaft
- Input shaft, assembly overview
- Input shaft, disassembling and assembling - assembly sequence
- Notes
- Synchronizer rings for 3rd to 6th gears, checking for wear
- Installation location of synchronizer rings for 3rd to 6th gears
- Assembly of locking collar/synchronizer hub for 5th and 6th gear
- Pressing on synchronizer hub with locking collar for 5th and 6th gears
- Inner race/needle bearing - arrow A - for 6th gear selector gear, pressing on
- Inner race/needle bearing - arrow A - for 3rd gear selector gear, pressing on
- 3rd/4th gear synchronizer hub installation location
- Pressing on synchronizer hub for 3rd and 4th gears
- 3rd/4th gear locking collar installation location
- Assembly of locking collar/synchronizer hub for 3rd and 4th gear
- Inner race/needle bearing for 4th gear selector gear, pressing on
- Determine thickness of circlip - 1 - and shim - 2 - as follows:
- Drive pinion and hollow shaft
- Drive pinion and hollow shaft, assembly overview
- Drive pinion, disassembling and assembling
- Notes
- Flange shaft mounting needle bearing, removing from drive pinion
- Flange shaft mounting needle bearing, driving in flush in drive pinion
- Pressing off inner race/tapered roller bearing
- Double angular contact ball bearing, pressing off
- Double angular contact ball bearing, pressing on
- Pressing on inner race/tapered roller bearing
- Shim " S 5 " for positioning inner race/tapered ball bearing, redetermining
- Hollow shaft, disassembling and assembling
- Shim " S 6 " for positioning 2nd gear selector gear, redetermining
- Torsen differential bearing, servicing
- Input shaft
- 39 - Front final drive, differential
- Flange shaft seals, replacing
- Differential, removing and installing
- Differential, disassembling and assembling
- Differential, disassembling and assembling
- Notes
- Pulling outer race for right tapered roller bearing out of transmission housing
- Right tapered roller bearing outer race, driving into transmission housing
- Tapered roller bearing inner races, removing
- Pressing off left and right tapered roller bearing inner race
- Left tapered roller bearing outer race, removing from final drive cover
- Left tapered roller bearing outer race, pressing into final drive cover
- Driving ring gear from housing
- Heat ring gear to approx. 100°C and install
- Differential planetary gear axle, removing
- Differential planetary gears, installing
- Differential, disassembling and assembling
- Pinion and ring gear, adjusting
- 6-Speed Manual Transmission 0A3, All Wheel Drive
- 00 Technical data
- 30 Clutch
- Clutch mechanism, servicing
- Clutch mechanism, servicing
- Pedal cluster, assembly overview
- Clutch Pedal Switch F36, removing and installing
- Over-center spring, removing and installing
- Hydraulic system, assembly overview
- Clutch master cylinder and slave cylinder, notes on removing and installing
- Clutch master cylinder, removing and installing
- Hydraulic clutch system, bleeding
- Clutch release mechanism, servicing
- Clutch, servicing
- Clutch mechanism, servicing
- 34 Controls, housing
- Shift mechanism, servicing
- Transmission, removing and installing
- Transmission gear oil, checking level
- Transmission mounting, removing and installing
- Mounting transmission on assembly stand
- Transmission cover and Torsen differential, removing and installing
- Transmission cover, dismantling and assembling
- Transmission cover, dismantling and assembling
- Notes
- Pressing out flange shaft (transmission cover with vibration damper)
- Pressing out flange shaft (transmission cover without vibration damper)
- Pressing in flange shaft
- Levering off the oil seal.
- Preparing oil seal for installation
- Drive in seal onto stop.
- Pressing out ball bearing for flange shaft
- Pressing in ball bearing for flange shaft
- Transmission cover, dismantling and assembling
- Selector shaft with selector cylinder, servicing
- Reversing light switch, removing
- 35 Gears, shafts
- 39 Final drive, differential
- Rear Final Drive
- 00 General, Technical data
- Rear final drive identification
- Code letters, transmission ratios, capacities
- Allocation of mechanical units: 5-speed Manual Transmission 01A AWD
- Allocation of mechanical units: 6-speed Manual Transmission 01E, AWD
- Allocation of mechanical units: 6-speed Manual Transmission 02X, AWD
- Allocation of mechanical units: 6-speed Manual Transmission 0A3, AWD
- Allocation of mechanical units: Automatic Transmission 01V FWD and AWD
- Allocation of mechanical units: Automatic Gearbox 09L, AWD
- Transmission layout
- Repair instructions
- 39 Final drive, Differential
- Drive shaft, servicing
- Gear oil level in rear final drive, checking
- Flange shaft oil seals, replacing
- Drive shaft flange seal, replacing
- Rear final drive, removing and installing
- Rear final drive, disassembling and assembling
- Differential, removing and installing
- Differential, disassembling and assembling
- Differential, disassembling and assembling
- Notes
- Driving small taper roller bearing outer race out of cover
- Pressing in taper roller bearing outer race small until stop into housing
- Pulling off inner race for small taper roller bearing
- Pressing on small taper roller bearing inner race
- Pulling off inner race for large taper roller bearing
- Pressing on large taper roller bearing inner race
- Driving out outer race for large taper roller bearing out of cover
- Pressing in outer race for large taper roller bearing into cover
- Driving ring gear off housing
- Installing ring gear
- Installing small bevel gears
- Adjusting differential bevel gears
- Differential, disassembling and assembling
- Drive pinion, removing and installing and disassembling and assembling
- Drive pinion, removing and installing and disassembling and assembling
- Notes
- Removing nut for drive pinion
- Pulling flange for drive shaft off drive pinion
- Pulling out seal for flange for drive shaft
- Pressing drive pinion out of inner race for small taper roller bearing
- Pulling out small taper roller bearing outer race
- Driving out outer race for large taper roller bearing
- Pressing inner race for large taper roller bearing off drive pinion
- Pressing inner race for large taper roller bearing onto drive pinion
- Pulling in outer race for large taper roller bearing
- Pressing in small taper roller bearing outer race
- Pressing on small taper roller bearing inner race
- Inserting O-ring
- Tapping in seal for flange for drive shaft
- Installing flange
- Tighten nut for drive pinion and adjusting friction torque
- Measuring frictional torque
- Drive pinion, removing and installing and disassembling and assembling
- Drive pinion and ring gear, adjusting
- Drive pinion and ring gear, adjusting
- Gear sets, adjusting and marking
- Position of shims
- Adjustment overview
- Final drive, readjustment sequence
- Drive pinion, adjusting
- Ring gear, adjusting
- Notes
- Determining total shim thickness "Stotal" for shims "S1" + "S2"
- Determine "Stotal" (S1 + S2)
- Determining thickness of shim "S1*"
- Measuring frictional torque (check)
- Adjusting backlash
- Determining average backlash
- Determining thickness of shim "S2"
- The following shims are available for "S2"
- Determining thickness of shim "S1"
- The following shims are available for "S1"
- Check measurement
- 00 General, Technical data
- Rear Final Drive - 01R
- Rear final drive identification
- Code letters, transmission ratios, capacities
- Transmission layout
- Repair instructions
- Drive shaft, servicing
- Gear oil level in rear final drive, checking
- Flange shaft oil seals, replacing
- Drive shaft flange seal, replacing
- Rear final drive, removing and installing
- Rear final drive, disassembling and assembling
- Differential, removing and installing
- Differential, disassembling and assembling
- Notes
- Driving out small taper roller bearing outer race of cover
- Pressing in taper roller bearing outer race small until stop into housing
- Pulling off inner race for small taper roller bearing
- Pressing on small taper roller bearing inner race
- Pulling off inner race for large taper roller bearing
- Pressing on large taper roller bearing inner race
- Driving out outer race for large taper roller bearing out of cover
- Pressing in outer race for large taper roller bearing into cover
- Driving ring gear off housing
- Installing ring gear
- Installing small bevel gears
- Adjusting differential bevel gears
- Drive pinion, removing and installing and disassembling and assembling
- Notes
- Removing nut for drive pinion
- Pulling flange for drive shaft off drive pinion
- Pulling out seal for flange for drive shaft
- Pressing drive pinion out of inner race for small taper roller bearing
- Pulling out small taper roller bearing outer race
- Driving out outer race for large taper roller bearing
- Pressing inner race for large taper roller bearing off drive pinion
- Pressing inner race for large taper roller bearing onto drive pinion
- Pulling in outer race for large taper roller bearing
- Pressing in small taper roller bearing outer race
- Pressing on small taper roller bearing inner race
- Inserting O-ring
- Tapping in seal for flange for drive shaft
- Installing flange
- Tighten nut for drive pinion and adjusting friction torque
- Measuring frictional torque
- Drive pinion and ring gear, adjusting
- Rear Final Drive 0AR
- 00 - General, Technical Data
- 39 - Final drive, Differential
- Driveshaft, servicing overview
- Measure radial play at flange/driveshaft and mark
- Axle oil in rear final drive, checking
- Rear final drive, removing and installing
- Oil seals for flange shafts, replacing
- Sealing ring for flange/driveshaft (rear final drive installed), replacing
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- 6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing
- Driveshaft & Universal Joints
- Rear Final Drive
- 00 General, Technical data
- Rear final drive identification
- Code letters, transmission ratios, capacities
- Allocation of mechanical units: 5-speed Manual Transmission 01A AWD
- Allocation of mechanical units: 6-speed Manual Transmission 01E, AWD
- Allocation of mechanical units: 6-speed Manual Transmission 02X, AWD
- Allocation of mechanical units: 6-speed Manual Transmission 0A3, AWD
- Allocation of mechanical units: Automatic Transmission 01V FWD and AWD
- Allocation of mechanical units: Automatic Gearbox 09L, AWD
- Transmission layout
- Repair instructions
- 39 Final drive, Differential
- Drive shaft, servicing
- Gear oil level in rear final drive, checking
- Flange shaft oil seals, replacing
- Drive shaft flange seal, replacing
- Rear final drive, removing and installing
- Rear final drive, disassembling and assembling
- Differential, removing and installing
- Differential, disassembling and assembling
- Differential, disassembling and assembling
- Notes
- Driving small taper roller bearing outer race out of cover
- Pressing in taper roller bearing outer race small until stop into housing
- Pulling off inner race for small taper roller bearing
- Pressing on small taper roller bearing inner race
- Pulling off inner race for large taper roller bearing
- Pressing on large taper roller bearing inner race
- Driving out outer race for large taper roller bearing out of cover
- Pressing in outer race for large taper roller bearing into cover
- Driving ring gear off housing
- Installing ring gear
- Installing small bevel gears
- Adjusting differential bevel gears
- Differential, disassembling and assembling
- Drive pinion, removing and installing and disassembling and assembling
- Drive pinion, removing and installing and disassembling and assembling
- Notes
- Removing nut for drive pinion
- Pulling flange for drive shaft off drive pinion
- Pulling out seal for flange for drive shaft
- Pressing drive pinion out of inner race for small taper roller bearing
- Pulling out small taper roller bearing outer race
- Driving out outer race for large taper roller bearing
- Pressing inner race for large taper roller bearing off drive pinion
- Pressing inner race for large taper roller bearing onto drive pinion
- Pulling in outer race for large taper roller bearing
- Pressing in small taper roller bearing outer race
- Pressing on small taper roller bearing inner race
- Inserting O-ring
- Tapping in seal for flange for drive shaft
- Installing flange
- Tighten nut for drive pinion and adjusting friction torque
- Measuring frictional torque
- Drive pinion, removing and installing and disassembling and assembling
- Drive pinion and ring gear, adjusting
- Drive pinion and ring gear, adjusting
- Gear sets, adjusting and marking
- Position of shims
- Adjustment overview
- Final drive, readjustment sequence
- Drive pinion, adjusting
- Ring gear, adjusting
- Notes
- Determining total shim thickness "Stotal" for shims "S1" + "S2"
- Determine "Stotal" (S1 + S2)
- Determining thickness of shim "S1*"
- Measuring frictional torque (check)
- Adjusting backlash
- Determining average backlash
- Determining thickness of shim "S2"
- The following shims are available for "S2"
- Determining thickness of shim "S1"
- The following shims are available for "S1"
- Check measurement
- 00 General, Technical data
- Rear Final Drive - 01R
- Rear final drive identification
- Code letters, transmission ratios, capacities
- Transmission layout
- Repair instructions
- Drive shaft, servicing
- Gear oil level in rear final drive, checking
- Flange shaft oil seals, replacing
- Drive shaft flange seal, replacing
- Rear final drive, removing and installing
- Rear final drive, disassembling and assembling
- Differential, removing and installing
- Differential, disassembling and assembling
- Notes
- Driving out small taper roller bearing outer race of cover
- Pressing in taper roller bearing outer race small until stop into housing
- Pulling off inner race for small taper roller bearing
- Pressing on small taper roller bearing inner race
- Pulling off inner race for large taper roller bearing
- Pressing on large taper roller bearing inner race
- Driving out outer race for large taper roller bearing out of cover
- Pressing in outer race for large taper roller bearing into cover
- Driving ring gear off housing
- Installing ring gear
- Installing small bevel gears
- Adjusting differential bevel gears
- Drive pinion, removing and installing and disassembling and assembling
- Notes
- Removing nut for drive pinion
- Pulling flange for drive shaft off drive pinion
- Pulling out seal for flange for drive shaft
- Pressing drive pinion out of inner race for small taper roller bearing
- Pulling out small taper roller bearing outer race
- Driving out outer race for large taper roller bearing
- Pressing inner race for large taper roller bearing off drive pinion
- Pressing inner race for large taper roller bearing onto drive pinion
- Pulling in outer race for large taper roller bearing
- Pressing in small taper roller bearing outer race
- Pressing on small taper roller bearing inner race
- Inserting O-ring
- Tapping in seal for flange for drive shaft
- Installing flange
- Tighten nut for drive pinion and adjusting friction torque
- Measuring frictional torque
- Drive pinion and ring gear, adjusting
- Rear Final Drive 0AR
- 00 - General, Technical Data
- 39 - Final drive, Differential
- Driveshaft, servicing overview
- Measure radial play at flange/driveshaft and mark
- Axle oil in rear final drive, checking
- Rear final drive, removing and installing
- Oil seals for flange shafts, replacing
- Sealing ring for flange/driveshaft (rear final drive installed), replacing
- Rear Final Drive
- Wheel Hubs
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension, Wheels, Steering
- Axle Shafts
- Electrical
- Body Electrical
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment
- Charging Systems
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Generators & Regulators
- Electrical Equipment
- Component Locations
- Fuses & Circuit Breakers
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Fuses & Circuit Breakers
- Fuses & Circuit Breakers - Except Cabriolet
- Identification
- Component Identification
- Fuses
- Relays
- Relay Panel (4 Position) In Electronics Box, Plenum Chamber
- Notes
- Relay Panel (4 Position) In E-Box (Engine Code BGB, BPG)
- Relay Panel (4 Position) In E-Box (Engine Code BFB, BBK)
- Relay Panel (4 Position) In E-Box (Engine Code AUK, BKH)
- Relay Panel (4 Position) In E-Box (Engine Code BNS)
- Relay Panel (4 Position) In E-Box (Engine Code BBJ - With Automatic Transmission AG5)
- Relay Panel (4 Position) In E-Box (Engine Code BBJ - With Transmission 01J / 0AN)
- Relay Panel (4-Position) With Threaded Connection
- Relay Panel (9-Position) At Vehicle Electrical System Control Module -J519-
- Relay Panel (4 Position) In Electronics Box, Plenum Chamber
- Connector Station
- Fuses - Circuit Protection
- Electrical Equipment
- Gauges
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Instrument Systems - Cabriolet
- Instrument cluster
- Notes
- Fault message "dEF" on trip computer display
- Instrument cluster, removing and installing
- Multi-pin connectors on instrument cluster
- Assignment of contacts on multi-pin connector on instrument cluster
- Terminal assignment on connector for fuel gauge sensor
- Vehicles with front wheel drive
- Terminal assignment of the 4-pin connector on fuel gauge sender
- Vehicles with all wheel drive:
- Fuel gauge sensor I -G-
- Terminal assignment of 4-pin connector on fuel gauge sensor I -G-
- Fuel Level Sensor 2 -G169-
- Terminal assignment of the 4-pin harness connector at fuel level sensor 2 -G169-
- Instrument cluster
- Instrument Systems - Except Cabriolet
- Instrument cluster
- Notes
- Fault message "dEF" on trip computer display
- Instrument cluster, removing and installing
- Multi-pin connectors on instrument cluster
- Assignment of contacts on multi-pin connector on instrument cluster
- Multi-pin connector 32-pin, green
- Terminal assignment on connector for fuel gauge sensor
- Instrument cluster
- Interior Trim - Cabriolet
- Front door trims
- Component locations, assembly overview
- Door trim, assembly overview
- Trim, removing and installing
- Insulation, assembly overview
- Routing of wiring in door trim, assembly overview
- Armrest, removing and installing
- Central locking switch, removing and installing
- Mirror adjustment switch, removing and installing
- Interior door handle, removing and installing
- Switch panel for window regulator, removing and installing
- Switch panel for memory seat, removing and installing
- Switch panel for tailgate release and/or deactivation of anti-theft alarm, assembly overview
- Door warning light and courtesy light, removing and installing
- Treble loudspeaker, removing and installing
- Trim of bass loudspeaker, removing and installing
- Rear side trim
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Special tools and equipment
- Removing
- Remove left instrument panel cover
- Removing left instrument panel end mounting
- Detaching connectors on vent temperature sensor -G150- and -G151-
- Removing instrument panel vent
- Removing left and right instrument panel loudspeaker
- Removing and installing tray, switch and cup holder
- Removing light switch and adjuster for headlight range control
- Removing left instrument panel trim
- Removing instrument panel mountings driver's side.
- Removing upper steering column switch trim
- Removing sunlight penetration photosensor -G107-
- Removing trim for center defroster vent
- Removing center instrument panel loudspeaker
- Removing trim for right instrument panel cover.
- Removing right instrument panel cover
- Removing right instrument panel end mountings.
- Removing center instrument panel mountings
- Installing
- Left and/or right instrument panel air duct, removing and installing
- Central tube
- Trims
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Floor covering, assembly overview
- Sill panel trim, removing and installing
- Foot rest, removing and installing
- Foot rest holder, removing and installing
- Sun visor, removing and installing
- Sun visor mount, removing and installing
- Center sun visor, removing and installing
- Windshield trim, assembly overview
- Make-up mirror light, removing and installing
- Interior light / reading light, removing and installing
- Luggage compartment trim
- Trim for convertible top compartment
- Variable convertible top compartment
- Variable convertible top compartment, removing and installing
- Convertible top compartment lid, assembly overview
- Handle mount trim, assembly overview
- Handle for variable convertible top compartment, removing and installing
- Microswitch for variable convertible top compartment, removing and installing
- Toothed segment of variable convertible top compartment, removing and installing
- Rack of variable convertible top compartment, removing and installing
- Guide rail of variable convertible top compartment, removing and installing
- Console of variable convertible top compartment, assembly overview
- Front door trims
- Interior Trim - Except Cabriolet
- Front door trim
- Component locations, assembly overview
- Front door trim components, assembly overview
- Armrest, assembly overview
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Cable routing and door trim, assembly overview
- Door warning light and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, assembly overview
- Rear door trim, assembly overview
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, assembly overview
- Cable routing and door trim, assembly overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door handle, removing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, assembly overview
- Instrument panel, removing and installing
- Upper trim for steering column switches, removing
- Notes
- Center defroster outlet, removing
- Instrument panel speaker, removing
- Left instrument panel cover, removing
- Right instrument panel cover, removing
- Left trim for instrument panel, removing and installing
- Right trim for instrument panel, removing and installing
- Left and right instrument panel vents, removing and installing
- Left and right instrument panel air guides, removing and installing
- Removing
- Center instrument panel vent, removing and installing
- Cross member
- Roof trim (sedan)
- Roof trim (Avant)
- Trim
- Upper A-pillar trim, assembly overview
- Lower A-pillar trim, assembly overview
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, assembly overview
- Lower B-pillar trim, assembly overview
- C-pillar trim, assembly overview
- D-pillar trim, assembly overview
- Roof end, assembly overview
- Wheelhousing trim, assembly overview
- Rear shelf, assembly overview
- Rear lid trim, assembly overview
- Rear cross panel trim, assembly overview
- Luggage compartment side trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear panel trim, assembly overview
- Rear panel sill, assembly overview
- Dirt tray, assembly overview
- Luggage compartment floor mat, assembly overview
- Floor mat, assembly overview
- Trim (Avant)
- C-pillar trim, assembly overview
- Trim above rear door, assembly overview
- D-pillar trim, assembly overview
- Roof end trim, assembly overview
- Rear lid trim, assembly overview
- Side luggage compartment trim, assembly overview
- Sub compartment in luggage compartment, assembly overview
- Rear power outlet, removing and installing
- Partition grille, assembly overview
- Rear cross panel trim, assembly overview
- Storage area floor, assembly overview
- Dirt tray, assembly overview
- Console tie-downs, assembly overview
- Front door trim
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Windshield Wiper Washer System - Except Cabriolet
- Front windshield wiper system, servicing
- Front windshield washer system, servicing
- Rear windshield wiper and washer system, servicing (Avant)
- Headlight washer system, servicing
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- Horns
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Switches, servicing
- Notes
- Switch in center console, removing and installing
- Front seat heating switch, removing and installing
- Light switch, removing and installing
- Glove box light, removing and installing
- Switch for convertible top operation/navigation, removing and installing
- Mirror adjuster switch, removing and installing
- Window regulator switch, removing and installing
- Door contact switch, removing and installing
- Front central locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch, removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light/reading light, replacing
- Luggage compartment lights, removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- 12 V power outlet in luggage compartment, removing and installing
- Horn, servicing
- Switches, servicing
- Lights, Switches - Interior, Anti-Theft - Except Cabriolet
- Switches, servicing
- Notes
- Switches in center console, removing and installing
- Front seat heating switch, removing and installing
- Switch for heated rear seat, removing and installing
- Light switch, removing and installing
- Glove box light switch, removing and installing
- Mirror adjuster switch, removing and installing
- Double switch for driver side window lifter, removing and installing
- 4-way driver side window regulator, removing and installing
- Window lifter switches (front passenger's side), removing and installing
- Window lifter switches for rear doors, removing and installing
- Door contact switch, removing and installing
- Front center locking switch, removing and installing
- Rear center locking switch, removing and installing
- Switch for interior monitoring and towing protection or trunk release switch, removing and installing
- Trunk lid contact switch (sedan), removing and installing
- Taligate contact switch (Avant), removing and installing
- Immobilizer, servicing
- Interior lights, servicing
- Notes
- Front interior light/reading light, removing and installing
- Front interior light bulbs, replacing
- Front reading light bulb, replacing
- Rear interior light/reading light, removing and installing
- Rear interior light/reading light bulb, replacing
- Luggage compartment lights (sedan), removing and installing
- Cargo area light (Avant), removing and installing
- Light bulb for cargo area light (Avant), removing and installing
- Glove box light, removing and installing
- Light for make-up mirror, removing and installing
- Front footwell light, removing and installing
- Rear footwell light, removing and installing
- Door safety light and entry light, removing and installing
- Light bulb for light in door panel, removing and installing
- Tailgate light (Avant), removing and installing
- Horn, servicing
- Heated steering wheel
- Garage door opener - Homelink(R)
- Switches, servicing
- Lights, Switches - Interior, Anti-Theft - Cabriolet
- Motors, Switches, Relays
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment
- Starter
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Starting System
- Electrical Equipment
- Wiring Diagrams
- System Wiring Diagrams
- Using lemon2025'S Wiring Diagrams
- Air Conditioning
- Anti-Lock Brakes
- Anti-Theft
- Body Control Modules
- Computer Data Lines
- Cooling Fan
- Cruise Control
- Defoggers
- Electronic Power Steering
- Engine Performance
- Exterior Lights
- Ground Distribution
- Headlights
- Horn
- Instrument Cluster
- Interior Lights
- Memory Systems
- Navigation
- Power Distribution
- Power Door Locks
- Power Mirrors
- Power Seats
- Power Top/Sunroof
- Power Windows
- Radio
- Shift Interlock
- Starting/Charging
- Supplemental Restraints
- Transmission
- Trunk, Tailgate, Fuel Door
- Warning Systems
- Wiper/Washer
- Using lemon2025'S System Wiring Diagrams
- System Wiring Diagrams
- Body Electrical
- Engine Mechanical
- Cooling Fan
- 4.2L - Engine Cooling, Engine Code(S): BHF
- Cooling system components, removing and installing
- Notes
- Cooling system components
- Cooling system, draining and filling with coolant
- Coolant pump and thermostat, overview
- Coolant pump, removing and installing
- Thermostat, removing and installing
- Coolant pipes/hoses, overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary radiator, removing and installing
- Right auxiliary radiator, removing and installing
- Cooling system, checking for leaks
- Coolant fan -V7- and Coolant fan -2-- V177-
- Coolant fan -V7- and Coolant fan -2- -V177-, checking
- Coolant fan -V7- (left), removing and installing
- Coolant fan -2- -V177- (right), removing and installing
- Cooling system components, removing and installing
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- 4.2L - Fuel Injection And Ignition, Engine Code(S): BHF
- 24 Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- Exhaust emissions warning lamp (CHECK)
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- 28 Ignition/Glow plug system
- 24 Multiport Fuel Injection (MFI)
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- Electric Cooling Fans
- Description & Operation
- Component Locations
- System Tests
- Component Tests
- Removal & Installation
- Torque Specifications
- Wiring Diagrams
- 4.2L - Engine Cooling, Engine Code(S): BHF
- Cooling System (Mechanical)
- 4.2L - Engine Cooling, Engine Code(S): BHF
- Cooling system components, removing and installing
- Notes
- Cooling system components
- Cooling system, draining and filling with coolant
- Coolant pump and thermostat, overview
- Coolant pump, removing and installing
- Thermostat, removing and installing
- Coolant pipes/hoses, overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary radiator, removing and installing
- Right auxiliary radiator, removing and installing
- Cooling system, checking for leaks
- Coolant fan -V7- and Coolant fan -2-- V177-
- Coolant fan -V7- and Coolant fan -2- -V177-, checking
- Coolant fan -V7- (left), removing and installing
- Coolant fan -2- -V177- (right), removing and installing
- Cooling system components, removing and installing
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- 4.2L - Engine Cooling, Engine Code(S): BHF
- Exhaust
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- Exhaust System, Emission Controls - 4.2L V8 BHF
- Exhaust System, Emission Controls
- Exhaust components, removing and installing
- Notes
- Installation position of front clamps
- Installation position of rear clamps
- Components of left mounting
- Components of right mounting
- Center and rear mufflers, separating
- Left front exhaust pipe with primary and main catalytic converter, removing and installing
- Right front exhaust pipe with primary and main catalytic converter, removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, aligning stress-free
- Exhaust system, checking for leaks
- Secondary air injection system
- Notes
- Principle
- Function
- Secondary Air Injection (AIR) solenoid valve -N112-
- Secondary Air Injection (AIR) pump relay -J299-and Secondary Air Injection (AIR) pump motor -V101-, checking
- Secondary Air Injection (AIR) pump motor -V101-, removing and installing
- Combination valve for secondary air injection system, checking for proper operation and leakage
- Left combination valve for secondary air injection system, removing and installing
- Right combination valve for secondary air injection system, removing and installing
- Exhaust flap, servicing
- Exhaust components, removing and installing
- Exhaust System, Emission Controls
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Fuel System
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- Fuel Supply
- Fuel Supply
- Fuel Supply system, servicing guidelines
- Fuel supply system (front-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. Turbo engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (front-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine and 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine, 6-cyl. and 8-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel filter, servicing
- Fuel system, bleeding
- EVAP canister/leak detection system, servicing (front-and all-wheel drive vehicles)
- Notes
- EVAP canister, removing and installing
- EVAP canister and Leak Detection Pump (LDP), hose diagram (4-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (6-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (8-cylinder engines)
- Evaporative Emissions (EVAP) system diagnostic leak test
- Evaporative Emission (EVAP) system, automatic diagnostic leak test
- Evaporative Emissions (EVAP) system diagnostic leak test, performing
- Evaporative Emissions (EVAP) System Diagnosis using KLI9210 EVAP Tester
- Description
- Test EVAP system using Leak detection pump (LDP) -V144-
- Perform EVAP tester self-test
- Calibrate KLI9210 Tester
- Test fuel cap
- Test Leak detection pump (LDP) -V144- for internal leaks
- Test EVAP System
- Continued for all vehicles
- Method 1: Locate leak with smoke generator
- Method 2: Locate leak with ultrasonic tester
- Leak detection pump (LDP) -V144-, checking
- Leak detection pump (LDP) -V144-, removing and installing
- Accelerator linkage, servicing
- Fuel Supply
- Fuel Supply System
- 20 - Fuel supply system
- Notes for performing work on fuel supply system
- Fuel tank, vehicles with front wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive from 07.03 to 10.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L Turbo engine and 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , testing
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with FSI engine)
- Delivery rate of fuel pump, checking (vehicles with 4-cyl. TFSI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. FSI-engine)
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel level sensor G , checking
- Fuel level sensor G , removing and installing
- Fuel tank, vehicles with all wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel pump delivery quantity, checking (vehicles with 1.8L Turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive from 07.03 to 10.04
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) delivery quantity, checking
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 4-cyl. TFSI engine)
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 6-cyl. and 8-cyl. FSI engine)
- Fuel Pump (FP) Control Module J538 , removing and installing
- Fuel pump delivery quantity, checking (vehicles with 4-cyl. TFSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 6-cyl. FSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. MPI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. FSI-engine (Audi RS4))
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump
- Suction jet pump, removing and installing
- Fuel filter, servicing
- Fuel system, bleeding (1.8L Turbo engine)
- EVAP canister/leak detection system, servicing (Front and all wheel drive vehicles)
- EVAP canister/leak detection system, assembly overview
- Evaporative emissions (EVAP) canister, removing and installing
- EVAP canister/leak detection system, 8-cyl. FSI engine (Audi RS4), component overview
- EVAP canister, removing and installing (8-cyl. FSI engine (Audi RS4))
- Hose routing, EVAP canister/leak detection system - 1.8L Turbo engine
- Hose routing, EVAP canister/leak detection system 6-cyl. (MPI-engine)
- Hose routing, EVAP canister/leak detection system (6-cyl. FSI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. MPI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. FSI engine (Audi RS4))
- Leak detection system
- Diagnostic leak test, performing
- Fuel supply and tank ventilation systems, checking for leaks
- EVAP system, checking using tester KLI 9210
- Leak Detection Pump (LDP) V144 , checking (vehicles with MPI-engine)
- Leak Detection Pump (LDP) V144 , checking (vehicles with FSI and TFSI-engine)
- Leak Detection Pump (LDP) V144 , removing and installing
- Accelerator linkage, servicing
- 20 - Fuel supply system
- MULTIPORT Fuel Injection (MFI) - 4.2L V8 BHF
- Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- Multiport Fuel Injection (MFI)
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Mechanical
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- MULTIPORT Fuel Injection (MFI) - 4.2L V8 BHF
- Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- Multiport Fuel Injection (MFI)
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Starter
- Electrical Equipment
- 27 Battery, Starter, Generator, Cruise Control
- Battery
- General information
- Warnings and safety measures for lead-acid batteries
- Battery handling instructions
- Battery in engine compartment, disconnecting and reconnecting
- Battery in luggage compartment, disconnecting and connecting
- Battery in engine compartment, removing and installing
- Battery in luggage compartment, removing and installing
- Battery installation, checking
- Batteries with central gas venting
- Battery with charge indicator (magic eye), checking
- Visual inspection
- No-load voltage, checking
- Electrolyte level - batteries with charge indicator (magic eye), checking
- Electrolyte level - batteries with sealing plugs, checking
- Electrolyte specific gravity - batteries with sealing plugs, checking
- Battery, testing
- Battery, charging
- Quick-charging
- Battery Interrupt Igniter N253 - Audi RS4
- Generator (GEN)
- Generator (GEN) - 4-cylinder 1.8L Turbo engine, removing and installing
- Generator (GEN) - 4-cylinder 2.0L Turbo FSI engine, removing and installing
- Generator (GEN) - 3.0L 6-cylinder engine, removing and installing
- Generator (GEN) - 3.2L 6-cylinder FSI engine, removing and installing
- Generator (GEN) - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Generator (GEN) - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Starter
- Starter - 1.8L 4-cylinder Turbo engine, removing and installing
- Starter - 2.0L 4-cyl Turbo FSI engine, removing and installing
- Starter - 3.0L 6-cylinder engine, removing and installing
- Starter - 3.2L 6-cylinder FSI engine, removing and installing
- Starter - 4.2L 8-cylinder engine (Audi S4), removing and installing
- Starter - 4.2L 8-cylinder FSI engine (Audi RS4), removing and installing
- Battery
- 90 Instruments
- Instrument Cluster
- General information
- Instrument cluster, disposal
- On Board Diagnostic (OBD), function
- Message "dEF" in trip recorder display
- Instrument cluster, removing and installing
- Instrument cluster, rear view
- Instrument cluster multi-pin connector assignments
- Fuel Level Sensor G - front-wheel drive, multi-pin connector assignments
- Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 1.8L 4-cylinder Turbo engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 2.0L 4-cylinder Turbo FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Gauge Sensor G2 - 3.0L 6-cylinder engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 3.2L 6-cylinder FSI engine, multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi S4), multi-pin connector assignments
- Engine Coolant Temperature (ECT) Sensor G62 - 4.2L 8-cylinder engine (Audi RS4), multi-pin connector assignments
- Radio Frequency Controlled Clock Receiver J489 , removing and installing
- Instrument Cluster
- 92 Windshield Wiper Washer System
- Windshield Wiper System
- Windshield wiper system, removing and installing
- Windshield wiper blade park position, adjusting
- Windshield wiper blade - through 10.04, replacing
- Windshield wiper arm - through 10.04, assembly
- Windshield wiper blade mount - through 10.04, removing and installing
- Windshield wiper blade - from 11.04, replacing
- Windshield Washer System
- Rear Window Wiper Washer System
- Rear window wiper/washer, assembly
- Rear window washer spray jet, removing and installing
- Rear window washer spray jet, adjusting
- Rear window wiper arm, removing and installing
- Rear window wiper arm park position, adjusting
- Rear window wiper blade, replacing
- Rear window wiper motor, assembly
- Rear window wiper motor, removing and installing
- Washer fluid reservoir, removing and installing
- Headlamp Washer System - through 10.04
- Headlamp Washer System - from 11.04
- Windshield Wiper System
- 94 Lights, Switches - Exterior
- Halogen Headlamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp securing lugs, servicing
- Halogen Headlamps - from 11.04
- General information
- On Board Diagnostic (OBD), functions
- Halogen headlamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Low Beam Headlamp M29 / M31 - bulb, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge (HID) Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- HID low beam headlamp bulb - through approx. 09.01, replacing
- HID headlamp bulb, disposal
- HID low beam headlamp bulb - from approx. 09.01, replacing
- High Beam Headlamp M30 / M32 - bulb, replacing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - from approx. 09.01, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- HID low beam headlamp bulb, replacing
- HID headlamp bulb, disposal
- High Beam Headlamp bulb M30 / M32, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348, removing and installing
- Turn signal/parking lamp bulb, replacing
- Headlamp Beam Adjustment Motor V48 / V49, removing and installing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Adapter cable for HID headlamp bulb control module, removing and installing
- Headlamp securing lugs, servicing
- Headlamps with High Intensity Gas Discharge HID Bi-Xenon Lamps - through 10.04
- General information
- On Board Diagnostic (OBD), functions
- Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
- Headlamps, removing and installing
- Headlamps, adjusting
- Headlamps, service preparation
- Notes
- Upper washer fluid reservoir and power steering fluid reservoir, removing and installing
- Preparation - vehicles with 1.8L 4-cylinder Turbo engine
- Preparation - vehicles with 2.0L 4-cylinder Turbo FSI engine
- Preparation - vehicles with 3.0L 6-cylinder engine
- Preparation - vehicles with 3.2L 6-cylinder FSI engine
- Preparation - vehicles with 4.2L 8-cylinder engine (Audi S4)
- Preparation - vehicles with 4.2L 8-cylinder FSI engine (Audi RS4)
- HID headlamp bulb, replacing
- HID headlamp bulb, disposal
- Daytime Running Lamp (DRL) bulb, replacing
- Parking Lamp M1 / M3 - bulb, replacing
- High/Low Beam Switch-Over Solenoid N347 / N348 and Dynamic Cornering Light Motor V318 / V319, removing and installing
- Front Turn Signal Lamp M5 / M7 - bulb, replacing
- High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
- Headlamp securing lugs, servicing
- Fog Lamps - through 10.04
- Fog Lamps - from 11.04
- Fog lamp housing - Audi A4, removing and installing
- Fog lamp housing - Audi A4 with "S-line" equipment Audi S4, removing and installing
- Fog lamp housing - Audi RS4, removing and installing
- Fog lamp bulb - Audi A4, replacing
- Fog lamp bulb - Audi A4 with "S-line" equipment Audi S4, replacing
- Fog lamp bulb - Audi RS4, replacing
- Fog lamps, adjusting
- Side Mounted Turn Signals
- Rear Lights - through 10.04
- Rear Lights - from 11.04
- Rear lights in rear fender - Sedan, assembly
- Rear light/bulb carrier in rear fender - Sedan, removing and installing
- Rear lights in rear lid - Sedan, assembly
- Rear light/bulb carrier in rear lid - Sedan, removing and installing
- Taillamp/rear fog lamp bulb, replacing
- Rear lights in rear fender - Avant, assembly
- Rear light/bulb carrier in rear fender - Avant, removing and installing
- Rear lights in rear lid - Avant, assembly
- Rear light/bulb carrier in rear lid - Avant, removing and installing
- Taillamp/rear fog lamp bulb, removing and installing
- High-Mount Brake Lamp - through 10.04
- High-Mount Brake Lamp - from 11.04
- License Plate Lamp
- Steering Column Switch Module
- General information
- On Board Diagnostic (OBD), function
- Steering column switch module, assembly
- Steering column switch module, removing and installing
- Spiral spring, removing and installing
- Steering Angle Sensor G85 , removing and installing
- Steering Column Electronics Systems Control Module J527 , removing and installing
- Steering Column Electronics Systems Control Module J527 , front multi-pin connector assignments
- Steering Column Electronics Systems Control Module J527 , rear multi-pin connector assignments
- Turn Signal Switch E2 , removing and installing
- Cruise Control Switch E45 , removing and installing
- Windshield Wiper/Washer Switch E22 , removing and installing
- Ignition/Starter Switch and Lock Cylinder
- Parking Aid System
- General information
- On Board Diagnostic (OBD), functions
- Parking aid system, component overview
- Parking Aid Control Module J446 , removing and installing
- Rear Parking Aid Warning Buzzer H15 - Sedan, removing and installing
- Rear Parking Aid Warning Buzzer H15 - Avant, removing and installing
- Rear parking aid sensors, removing and installing
- Automatic Headlamp Range Control
- Halogen Headlamps - through 10.04
- 96 Lights, Switches - Interior, Anti-theft
- Switches - Interior
- Light Switch E1 , removing and installing
- Ambient Illumination Deactivation Switch E491 , removing and installing
- Daytime running lamps (DRL) switch, removing and installing
- Emergency Flasher Button E229 , removing and installing
- Switches in center console, removing and installing
- Front heated seat regulating switches, removing and installing
- Rear heated seat regulating switches, removing and installing
- Start System Button E378 - Audi RS4, removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Mirror selector/adjustment switch, removing and installing
- Drivers power window switch panel - 2 switches, removing and installing
- Drivers power window switch panel - four switches, removing and installing
- Front passengers power window switch panel, removing and installing
- Rear door power window switches, removing and installing
- Sunroof Switch E8 , removing and installing
- Door contact switches, removing and installing
- Drivers Interior Locking Switch E150 , removing and installing
- Rear/Center Central Locking Switch E286 , removing and installing
- Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing
- Drivers Seat Memory Program Control E97 , removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - Avant through 10.04, removing and installing
- Trunk Lock/Alarm/Central Locking Switch F124 - from 11.04, removing and installing
- 12 V Socket U5 - in luggage compartment through 10.04, removing and installing
- 12 V Socket U5 - in luggage compartment from 11.04, removing and installing
- Anti-Theft Immobilizer
- Alarm Horn H12
- Lights - Interior
- Make-up Mirror Illumination L31 , removing and installing
- Front interior lamp module, removing and installing
- Ambient lighting LEDs, removing and installing
- Front Interior Light W1 - bulbs, replacing
- Front Passengers Map/Reading Light W13 , Drivers Map/Reading Light W19 - bulbs, replacing
- Front Passengers Airbag Disabled Indicator Lamp K145 - from 11.04, removing and installing
- Rear interior lamp module, removing and installing
- Left Rear Reading Light W11 , Right Rear Reading Light W12 - bulbs, replacing
- Glove Compartment Light W6 , removing and installing
- Front ashtray light, removing and installing
- Rear ashtray light, removing and installing
- Drivers Door Opener Illumination L108 , Front Passengers Door Opener Illumination L109 , Left Rear Door Opener Illumination L110 , Right Rear Door Opener Illumination L111 , removing and installing
- Door entry warning lights, removing and installing
- Left Footwell Light W9 , Right Footwell Light W10 , removing and installing
- Left Rear Footwell Light W45 , Right Rear Footwell Light W46 , removing and installing
- Left Luggage Compartment Light W18 , Right Luggage Compartment Light W35 - Sedan, removing and installing
- Luggage Compartment Light W3 - Avant, removing and installing
- Luggage Compartment Light W3 - bulb, Avant, replacing
- Rear Lid Courtesy Lamp W51 - Avant, removing and installing
- Horn
- Heated Steering Wheel
- Garage Door Opener - HomeLink (R)
- Switches - Interior
- 97 Wiring
- Relay and fuse panels
- General information
- Fuse panel, removing and installing
- Vehicle Electrical System Control Module J519 , removing and installing
- 9-position relay carrier, removing and installing
- 3-position relay carrier, removing and installing
- 4-position relay carrier, removing and installing
- Left connector station, removing and installing
- Comfort System Central Control Module J393 , removing and installing
- Right connector station, removing and installing
- Main fuse panel in left rear luggage compartment - Audi RS4, removing and installing
- Electronics box in plenum chamber, removing and installing
- Electronics box fan in plenum chamber, removing and installing
- 4-way relay carrier in electronics box in plenum chamber, removing and installing
- Connector junction, electronics box in plenum chamber, removing and installing
- Main fuse panel - vehicles with battery in engine compartment, removing and installing
- Positive terminal in plenum chamber - Audi RS4, removing and installing
- Wiring Harness and Connectors, servicing
- General information
- Safety precautions for repairing wiring harnesses and connectors
- Notes on repairs on wiring harnesses and connectors
- Notes on repairs to airbag and safety belt tensioner wiring harness
- Notes for repairs on CAN-Bus wires
- Repairing a wire with cross-section 0.22 mm 2 or 0.35 mm 2
- Antenna cables, replacing
- Antenna connector cable, replacing
- Relay and fuse panels
- 27 Battery, Starter, Generator, Cruise Control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Starting System
- Electrical Equipment
- Cooling Fan
- Engine Performance
- Emissions
- Emission Applications
- Emission Control Abbreviations
- State Emission Standards - Diesel
- State Emission Standards - Gas
- ALASKA
- ARIZONA
- CALIFORNIA
- Colorado
- CONNECTICUT
- DELAWARE
- District Of COLUMBIA
- GEORGIA
- IDAHO
- ILLINOIS
- INDIANA
- KENTUCKY
- MARYLAND
- MASSACHUSETTS
- MISSOURI
- NEVADA
- New Jersey
- New MEXICO
- New YORK
- North CAROLINA
- OHIO
- OREGON
- PENNSYLVANIA
- RHODE Island
- TENNESSEE
- TEXAS
- UTAH
- VIRGINIA
- WASHINGTON
- WISCONSIN
- U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
- U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
- U.S. EPA Im240 Emission Standards
- Fuel Delivery
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- Fuel Supply
- Fuel Supply
- Fuel Supply system, servicing guidelines
- Fuel supply system (front-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. Turbo engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (front-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine and 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine, 6-cyl. and 8-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel filter, servicing
- Fuel system, bleeding
- EVAP canister/leak detection system, servicing (front-and all-wheel drive vehicles)
- Notes
- EVAP canister, removing and installing
- EVAP canister and Leak Detection Pump (LDP), hose diagram (4-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (6-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (8-cylinder engines)
- Evaporative Emissions (EVAP) system diagnostic leak test
- Evaporative Emission (EVAP) system, automatic diagnostic leak test
- Evaporative Emissions (EVAP) system diagnostic leak test, performing
- Evaporative Emissions (EVAP) System Diagnosis using KLI9210 EVAP Tester
- Description
- Test EVAP system using Leak detection pump (LDP) -V144-
- Perform EVAP tester self-test
- Calibrate KLI9210 Tester
- Test fuel cap
- Test Leak detection pump (LDP) -V144- for internal leaks
- Test EVAP System
- Continued for all vehicles
- Method 1: Locate leak with smoke generator
- Method 2: Locate leak with ultrasonic tester
- Leak detection pump (LDP) -V144-, checking
- Leak detection pump (LDP) -V144-, removing and installing
- Accelerator linkage, servicing
- Fuel Supply
- Fuel Supply System
- 20 - Fuel supply system
- Notes for performing work on fuel supply system
- Fuel tank, vehicles with front wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive from 07.03 to 10.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L Turbo engine and 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , testing
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with FSI engine)
- Delivery rate of fuel pump, checking (vehicles with 4-cyl. TFSI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. FSI-engine)
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel level sensor G , checking
- Fuel level sensor G , removing and installing
- Fuel tank, vehicles with all wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel pump delivery quantity, checking (vehicles with 1.8L Turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive from 07.03 to 10.04
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) delivery quantity, checking
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 4-cyl. TFSI engine)
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 6-cyl. and 8-cyl. FSI engine)
- Fuel Pump (FP) Control Module J538 , removing and installing
- Fuel pump delivery quantity, checking (vehicles with 4-cyl. TFSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 6-cyl. FSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. MPI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. FSI-engine (Audi RS4))
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump
- Suction jet pump, removing and installing
- Fuel filter, servicing
- Fuel system, bleeding (1.8L Turbo engine)
- EVAP canister/leak detection system, servicing (Front and all wheel drive vehicles)
- EVAP canister/leak detection system, assembly overview
- Evaporative emissions (EVAP) canister, removing and installing
- EVAP canister/leak detection system, 8-cyl. FSI engine (Audi RS4), component overview
- EVAP canister, removing and installing (8-cyl. FSI engine (Audi RS4))
- Hose routing, EVAP canister/leak detection system - 1.8L Turbo engine
- Hose routing, EVAP canister/leak detection system 6-cyl. (MPI-engine)
- Hose routing, EVAP canister/leak detection system (6-cyl. FSI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. MPI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. FSI engine (Audi RS4))
- Leak detection system
- Diagnostic leak test, performing
- Fuel supply and tank ventilation systems, checking for leaks
- EVAP system, checking using tester KLI 9210
- Leak Detection Pump (LDP) V144 , checking (vehicles with MPI-engine)
- Leak Detection Pump (LDP) V144 , checking (vehicles with FSI and TFSI-engine)
- Leak Detection Pump (LDP) V144 , removing and installing
- Accelerator linkage, servicing
- 20 - Fuel supply system
- MULTIPORT Fuel Injection (MFI) - 4.2L V8 BHF
- Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- Multiport Fuel Injection (MFI)
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Ignition System
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- 4.2L - Fuel Injection And Ignition, Engine Code(S): BHF
- 24 Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- Exhaust emissions warning lamp (CHECK)
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- 28 Ignition/Glow plug system
- 24 Multiport Fuel Injection (MFI)
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- Ignition/Glow Plug System - 4.2L V8 BHF
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Mode 6
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- Specifications
- System
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- 4.2L - Fuel Injection And Ignition, Engine Code(S): BHF
- 24 Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- Exhaust emissions warning lamp (CHECK)
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- 28 Ignition/Glow plug system
- 24 Multiport Fuel Injection (MFI)
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- Exhaust System, Emission Controls - 4.2L V8 BHF
- Exhaust System, Emission Controls
- Exhaust components, removing and installing
- Notes
- Installation position of front clamps
- Installation position of rear clamps
- Components of left mounting
- Components of right mounting
- Center and rear mufflers, separating
- Left front exhaust pipe with primary and main catalytic converter, removing and installing
- Right front exhaust pipe with primary and main catalytic converter, removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, aligning stress-free
- Exhaust system, checking for leaks
- Secondary air injection system
- Notes
- Principle
- Function
- Secondary Air Injection (AIR) solenoid valve -N112-
- Secondary Air Injection (AIR) pump relay -J299-and Secondary Air Injection (AIR) pump motor -V101-, checking
- Secondary Air Injection (AIR) pump motor -V101-, removing and installing
- Combination valve for secondary air injection system, checking for proper operation and leakage
- Left combination valve for secondary air injection system, removing and installing
- Right combination valve for secondary air injection system, removing and installing
- Exhaust flap, servicing
- Exhaust components, removing and installing
- Exhaust System, Emission Controls
- Fuel Supply
- Fuel Supply
- Fuel Supply system, servicing guidelines
- Fuel supply system (front-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. Turbo engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (front-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine and 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine, 6-cyl. and 8-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel filter, servicing
- Fuel system, bleeding
- EVAP canister/leak detection system, servicing (front-and all-wheel drive vehicles)
- Notes
- EVAP canister, removing and installing
- EVAP canister and Leak Detection Pump (LDP), hose diagram (4-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (6-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (8-cylinder engines)
- Evaporative Emissions (EVAP) system diagnostic leak test
- Evaporative Emission (EVAP) system, automatic diagnostic leak test
- Evaporative Emissions (EVAP) system diagnostic leak test, performing
- Evaporative Emissions (EVAP) System Diagnosis using KLI9210 EVAP Tester
- Description
- Test EVAP system using Leak detection pump (LDP) -V144-
- Perform EVAP tester self-test
- Calibrate KLI9210 Tester
- Test fuel cap
- Test Leak detection pump (LDP) -V144- for internal leaks
- Test EVAP System
- Continued for all vehicles
- Method 1: Locate leak with smoke generator
- Method 2: Locate leak with ultrasonic tester
- Leak detection pump (LDP) -V144-, checking
- Leak detection pump (LDP) -V144-, removing and installing
- Accelerator linkage, servicing
- Fuel Supply
- Fuel Supply System
- 20 - Fuel supply system
- Notes for performing work on fuel supply system
- Fuel tank, vehicles with front wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive from 07.03 to 10.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L Turbo engine and 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , testing
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with FSI engine)
- Delivery rate of fuel pump, checking (vehicles with 4-cyl. TFSI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. FSI-engine)
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel level sensor G , checking
- Fuel level sensor G , removing and installing
- Fuel tank, vehicles with all wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel pump delivery quantity, checking (vehicles with 1.8L Turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive from 07.03 to 10.04
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) delivery quantity, checking
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 4-cyl. TFSI engine)
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 6-cyl. and 8-cyl. FSI engine)
- Fuel Pump (FP) Control Module J538 , removing and installing
- Fuel pump delivery quantity, checking (vehicles with 4-cyl. TFSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 6-cyl. FSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. MPI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. FSI-engine (Audi RS4))
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump
- Suction jet pump, removing and installing
- Fuel filter, servicing
- Fuel system, bleeding (1.8L Turbo engine)
- EVAP canister/leak detection system, servicing (Front and all wheel drive vehicles)
- EVAP canister/leak detection system, assembly overview
- Evaporative emissions (EVAP) canister, removing and installing
- EVAP canister/leak detection system, 8-cyl. FSI engine (Audi RS4), component overview
- EVAP canister, removing and installing (8-cyl. FSI engine (Audi RS4))
- Hose routing, EVAP canister/leak detection system - 1.8L Turbo engine
- Hose routing, EVAP canister/leak detection system 6-cyl. (MPI-engine)
- Hose routing, EVAP canister/leak detection system (6-cyl. FSI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. MPI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. FSI engine (Audi RS4))
- Leak detection system
- Diagnostic leak test, performing
- Fuel supply and tank ventilation systems, checking for leaks
- EVAP system, checking using tester KLI 9210
- Leak Detection Pump (LDP) V144 , checking (vehicles with MPI-engine)
- Leak Detection Pump (LDP) V144 , checking (vehicles with FSI and TFSI-engine)
- Leak Detection Pump (LDP) V144 , removing and installing
- Accelerator linkage, servicing
- 20 - Fuel supply system
- Ignition/Glow Plug System - 4.2L V8 BHF
- MULTIPORT Fuel Injection (MFI) - 4.2L V8 BHF
- Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- Multiport Fuel Injection (MFI)
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Testing & Diagnosis
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- 4.2L - Fuel Injection And Ignition, Engine Code(S): BHF
- 24 Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- Exhaust emissions warning lamp (CHECK)
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- 28 Ignition/Glow plug system
- 24 Multiport Fuel Injection (MFI)
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- Exhaust System, Emission Controls - 4.2L V8 BHF
- Exhaust System, Emission Controls
- Exhaust components, removing and installing
- Notes
- Installation position of front clamps
- Installation position of rear clamps
- Components of left mounting
- Components of right mounting
- Center and rear mufflers, separating
- Left front exhaust pipe with primary and main catalytic converter, removing and installing
- Right front exhaust pipe with primary and main catalytic converter, removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, aligning stress-free
- Exhaust system, checking for leaks
- Secondary air injection system
- Notes
- Principle
- Function
- Secondary Air Injection (AIR) solenoid valve -N112-
- Secondary Air Injection (AIR) pump relay -J299-and Secondary Air Injection (AIR) pump motor -V101-, checking
- Secondary Air Injection (AIR) pump motor -V101-, removing and installing
- Combination valve for secondary air injection system, checking for proper operation and leakage
- Left combination valve for secondary air injection system, removing and installing
- Right combination valve for secondary air injection system, removing and installing
- Exhaust flap, servicing
- Exhaust components, removing and installing
- Exhaust System, Emission Controls
- Fuel Supply
- Fuel Supply
- Fuel Supply system, servicing guidelines
- Fuel supply system (front-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. Turbo engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (front-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge sender, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine and 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Fuel gauge sender, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles up to 06.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine
- Fuel pump delivery rate, checking - Vehicles with 6-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel supply system (all-wheel drive) - Vehicles as of 07.2003
- Notes
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel gauge senders, component overview
- Fuel pump, testing (electrical test)
- Fuel pump delivery rate, checking - Vehicles with 4-cyl. Turbo engine, 6-cyl. and 8-cyl. engine
- Fuel delivery unit, removing and installing
- Sender for fuel gauge -G-, testing
- Sender for fuel gauge -G-, removing and installing
- Fuel Level Sensor 2 -G169-, testing
- Fuel Level Sensor 2 -G169-, removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch -F314-
- Fuel filter, servicing
- Fuel system, bleeding
- EVAP canister/leak detection system, servicing (front-and all-wheel drive vehicles)
- Notes
- EVAP canister, removing and installing
- EVAP canister and Leak Detection Pump (LDP), hose diagram (4-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (6-cylinder engines)
- EVAP canister and Leak Detection Pump (LDP), hose diagram (8-cylinder engines)
- Evaporative Emissions (EVAP) system diagnostic leak test
- Evaporative Emission (EVAP) system, automatic diagnostic leak test
- Evaporative Emissions (EVAP) system diagnostic leak test, performing
- Evaporative Emissions (EVAP) System Diagnosis using KLI9210 EVAP Tester
- Description
- Test EVAP system using Leak detection pump (LDP) -V144-
- Perform EVAP tester self-test
- Calibrate KLI9210 Tester
- Test fuel cap
- Test Leak detection pump (LDP) -V144- for internal leaks
- Test EVAP System
- Continued for all vehicles
- Method 1: Locate leak with smoke generator
- Method 2: Locate leak with ultrasonic tester
- Leak detection pump (LDP) -V144-, checking
- Leak detection pump (LDP) -V144-, removing and installing
- Accelerator linkage, servicing
- Fuel Supply
- Fuel Supply System
- 20 - Fuel supply system
- Notes for performing work on fuel supply system
- Fuel tank, vehicles with front wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive from 07.03 to 10.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Delivery rate of fuel pump, checking (vehicles with 1.8L Turbo engine and 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , testing
- Fuel Level Sensor G , removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel tank, vehicles with front wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with FSI engine)
- Delivery rate of fuel pump, checking (vehicles with 4-cyl. TFSI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. FSI-engine)
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel level sensor G , checking
- Fuel level sensor G , removing and installing
- Fuel tank, vehicles with all wheel drive up to 06.03
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and Fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel pump delivery quantity, checking (vehicles with 1.8L Turbo engine)
- Delivery rate of fuel pump, checking (vehicles with 6-cyl. MPI-engine)
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive from 07.03 to 10.04
- Fuel tank with attachments, component overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) delivery quantity, checking
- Fuel delivery unit, removing and installing
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump, function
- Suction jet pump in left fuel tank chamber, removing and installing
- Fuel Tank Lock Switch F314 , checking
- Fuel supply system, vehicles with all wheel drive as of 11.04
- Fuel tank with attachments, assembly overview
- Fuel tank, draining
- Fuel tank with attachments, removing and installing
- Fuel delivery unit and fuel level sensor, assembly overview
- Fuel pump electrical, checking
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 4-cyl. TFSI engine)
- Fuel Pump (FP) Control Module J538 , checking (vehicles with 6-cyl. and 8-cyl. FSI engine)
- Fuel Pump (FP) Control Module J538 , removing and installing
- Fuel pump delivery quantity, checking (vehicles with 4-cyl. TFSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 6-cyl. FSI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. MPI-engine)
- Fuel pump delivery quantity, checking (vehicles with 8-cyl. FSI-engine (Audi RS4))
- Fuel delivery unit, removing and installing
- Fuel pump adaptation after replacing fuel delivery unit, (vehicles with 4-cyl. TFSI engine)
- Fuel Level Sensor G , checking
- Fuel Level Sensor G , removing and installing
- Fuel Level Sensor 2 G169 , checking
- Fuel Level Sensor 2 G169 , removing and installing
- Suction jet pump
- Suction jet pump, removing and installing
- Fuel filter, servicing
- Fuel system, bleeding (1.8L Turbo engine)
- EVAP canister/leak detection system, servicing (Front and all wheel drive vehicles)
- EVAP canister/leak detection system, assembly overview
- Evaporative emissions (EVAP) canister, removing and installing
- EVAP canister/leak detection system, 8-cyl. FSI engine (Audi RS4), component overview
- EVAP canister, removing and installing (8-cyl. FSI engine (Audi RS4))
- Hose routing, EVAP canister/leak detection system - 1.8L Turbo engine
- Hose routing, EVAP canister/leak detection system 6-cyl. (MPI-engine)
- Hose routing, EVAP canister/leak detection system (6-cyl. FSI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. MPI-engine)
- Hose routing, EVAP canister/leak detection system (8-cyl. FSI engine (Audi RS4))
- Leak detection system
- Diagnostic leak test, performing
- Fuel supply and tank ventilation systems, checking for leaks
- EVAP system, checking using tester KLI 9210
- Leak Detection Pump (LDP) V144 , checking (vehicles with MPI-engine)
- Leak Detection Pump (LDP) V144 , checking (vehicles with FSI and TFSI-engine)
- Leak Detection Pump (LDP) V144 , removing and installing
- Accelerator linkage, servicing
- 20 - Fuel supply system
- Ignition/Glow Plug System - 4.2L V8 BHF
- MULTIPORT Fuel Injection (MFI) - 4.2L V8 BHF
- Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- Multiport Fuel Injection (MFI)
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Tune-Up
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Belt pulley side, servicing
- Timing chain side, servicing
- Dual-mass flywheel, component overview
- Dual-mass flywheel, removing and installing
- Dual-mass flywheel needle bearings, pulling out and driving in
- Drive plate, component overview
- Drive plate, removing and installing
- Crankshaft seal (timing chain side), replacing
- Timing chains covers, component overview
- Timing chain covers (All), removing and installing
- Camshaft timing chain, component overview
- Camshaft timing chain, removing and installing
- Camshaft timing chains, removing from camshafts
- Drive chain for timing mechanism - component overview
- Drive chain for timing mechanism, removing and installing
- Chain for power take-off, component overview
- Chain for power take-off, removing and installing
- Power take-off, component overview
- Power take-off seals, replacing
- Spur gear unit, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Intake manifold, removing and installing
- Valvetrain, servicing
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Lubrication system components, removing and installing
- Oil pump, lower section of oil pan, component overview
- Oil pan (lower part), removing and installing
- Oil pump, removing and installing
- Upper section of oil pan, component overview
- Oil pan (upper part), removing and installing
- Oil check valves and spray nozzle valve - component overview
- Oil check valves and spray nozzle valve, removing and installing
- Oil filter housing, component overview
- Oil filter housing, removing and installing
- Oil cooler, removing and installing
- Oil Pressure Switch F1 , removing and installing
- Oil pressure and oil pressure switch, checking
- Engine oil
- Oil level, checking
- Lubrication system components, removing and installing
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant pump and coolant thermostat, component overview
- Coolant pump, removing and installing
- After-Run Coolant Pump V51 , removing and installing
- Coolant thermostat, removing and installing
- Thermostat, checking
- Coolant pipes/hoses, component overview
- Front coolant pipe, removing and installing
- Rear coolant pipe, removing and installing
- Left coolant pipe, removing and installing
- Right coolant pipe, removing and installing
- Radiator, removing and installing
- Left auxiliary cooler, removing and installing
- Right auxiliary cooler, removing and installing
- Cooling system, checking for leaks
- Electric coolant fan, function
- Electric coolant fan, checking
- Coolant Fan V7 (left), removing and installing
- Coolant Fan 2 V177 (right), removing and installing
- Cooling system components, removing and installing
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, component overview
- Center muffler and rear muffler, separating
- Left front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with manual transmission), removing and installing
- Left front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Right front exhaust pipe with primary and main catalytic converter (vehicles with automatic transmission), removing and installing
- Left exhaust manifold, removing and installing
- Right exhaust manifold, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for leaks
- Secondary Air Injection (AIR), servicing
- Secondary Air Injection (AIR), servicing
- Principle and function
- Secondary Air Injection (AIR), component overview
- Secondary Air Injection (AIR) pump, removing and installing
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Left combination valve for Secondary Air Injection, removing and installing
- Right combination valve for Secondary Air Injection, removing and installing
- Exhaust flap
- Exhaust system components, removing and installing
- 4.2L - Fuel Injection And Ignition, Engine Code(S): BHF
- 24 Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations overview
- Notes
- MIL exhaust emissions warning lamp
- Exhaust emissions warning lamp (CHECK)
- EPC warning lamp
- Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation location of Throttle Position (TP) sensor -G79- Sender -2- for accelerator pedal position -G185-
- Installation location of Brake light switch -F-, Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47- and Clutch Vacuum Vent Valve Switch -F36-
- Installation location of Fuel Pump (FP) Relay -J17-
- Installation locations in plenum chamber electronics box
- Installation location of engine control module in plenum chamber electronics box
- Assignment of holder for connectors (right side)
- Connector console beneath coolant expansion tank
- Rear view
- Front view
- Secondary Air Injection (AIR) Pump Motor -V101-
- Leak detection pump (LDP) -V144-
- Fuel pressure regulator and holding pressure, checking
- Injection quantity, leakage, and spray pattern of injectors, checking
- Wiring and component check using test box V.A.G 1598/31
- Motronic Engine Control Module (ECM) -J220-, replacing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Lock carrier in service position, overview
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen sensor (HO2S) before catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor before catalytic converter, bank 2 (left), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 1 (right), removing and installing
- Heated Oxygen Sensor (HO2S) after catalytic converter, bank 2 (left), removing and installing
- Motronic injection system, servicing
- 28 Ignition/Glow plug system
- 24 Multiport Fuel Injection (MFI)
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- Ignition/Glow Plug System - 4.2L V8 BHF
- 4.2L - Engine Mechanical, Engine Code(S): BHF
- Emissions
- General Information
- Abbreviations
- Basic Trouble Shooting
- Basic Trouble Shooting - General Information
- Commonly Used Abbreviations - General Information
- Emission Control Abbreviations
- Engine Performance - Trouble Shooting - General Information
- Brakes
- Anti-Lock Brake Safety Precautions - General Information
- Map - Brake Systems
- Brake Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Accelerometers
- Accumulators
- Anchor Pins
- Anti-Lock Brake Control Assembly(Module)
- Anti-Lock Brake Controller
- Anti-Lock Brake Systems
- Axle Seal
- Backing Plates
- Bleeder Screw
- Brake Abs Active Light (Blue)
- Brake Fluid
- Brake Friction Material
- Brake On - Off Switch
- Brake Pads
- Brake Pedals
- Brake Shoe Hardware
- Brake Shoes
- Brake Stoplight Switches
- Brake Warning Light (Amber)
- Brake Warning Light (Red)
- Bulb Sockets
- Bulbs And LEDS
- Caliper Hardware
- Caliper Mounting Pin
- Caliper Piston
- Caliper Shim
- Caliper Slider Pin (Bolt) Dust Boot
- Caliper Slider Pin (Bolt)
- Calipers
- Combination Valve
- Controllers
- Digital Ratio Axle Controllers And Buffers (Drab And Dram)
- Disable Switches
- Drums
- Electrical Brake Pumps
- Electrical Park Motor
- Electrical Pumps And Motors
- Electro-Magnetic Interference
- Electronic Brake Control Modulator
- Electronic Brake Distribution
- Electronic Brake Traction Control Module
- Electronic Controllers
- Electronic Traction Control
- External Brake Cable
- Flow Control Valve
- Fluid Level Sensor Switches
- Fluid
- Four Wheel Drive Switches
- Friction Material
- G Sensors
- Gaskets
- Gravitational Switches
- Grease Seal
- Height Sensing Proportioning Valve
- High Pressure Accumulator
- Hoses
- Hub
- Hydraulic Control Unit
- Hydraulic Modulators
- Hydro-Boosters
- Hydro-Electric Boosters (POWERMASTER)
- Ignition Disable Switches
- Lamp Driver Relay
- Lateral Acceleration Switches
- LEDS
- Lenses
- Low Pressure Accumulator
- Lug Nut
- Master Cylinder Cover Gasket
- Master Cylinders
- Modulators
- Motor Pack
- Motors
- Pads
- Parking Brake Cable
- Parking Brake Mechanism
- Parking Brake Shoes
- Parking Brake Switches
- Parking Brake Systems
- Pedal Travel Switches
- Pedals
- Power Distribution Center
- POWERMASTER
- Pressure Differential Switches
- Pressure Switches
- Pressure Transducers
- Proportioning Valve
- Pumps
- Relays
- RELUCTOR (Speed) Ring
- Rotors
- Self-Adjusting Systems
- Shoe Hardware
- Shoes
- Sockets
- Speed Sensor (RELUCTOR) Ring
- Speed Sensors (Electronic Wheel And Vehicle)
- Star Wheel
- Steel Brake Lines
- Stoplight Switches
- Stroke Sensor
- Switches
- Tires
- Tone Ring
- Toothed Rings (Tone Wheel)
- Traction Control System (TCS)
- Transfer Tubes
- Vacuum Boosters
- Vacuum Hoses
- Valves
- Wear Indicator
- Wheel Attachment Hardware
- Wheel Bearings, Races And Seals
- Wheel Cylinders
- Wiring Harnesses
- Yaw Rate Sensor
- Brake System CHECKSHEET
- Reason Code Explanation
- Automotive Terminology & Definitions
- Brake Systems
- Map - Routine Inspection Reference Guide
- Routine Inspection Reference Guide
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Maintenance Overview
- Antifreeze/Coolant
- Visual Inspection
- Radiator Cap Test
- Engine Fan
- Cooling System Power Flush And Refill
- Belts (Except Timing Belts)
- Belt TENSIONER
- Automatic Transmission Fluid
- Automatic Transmission Fluid Exchange & Filter Replacement
- Engine Oil
- Air Filters
- Cabin Air Filter
- Brake Fluid
- Battery
- Battery Cables
- Power Steering
- Power Steering Fluid
- Wiper Blades
- Routine Inspection CHECKSHEET
- Routine Inspection - UICS
- Brake Systems
- Drivetrain And Transmission
- Notes
- Automatic Transmission Fluid
- Clutch Master Cylinders
- Cooler Lines
- Coolers
- Differential Fluid
- Drain Plugs And Gaskets
- Filters And Screens
- Fluids And Lubricants
- Hoses, Lines, And Tubes
- Hydraulic Fluid
- Lubricants
- Manual Transmission Fluid
- Mounts (Engine, Transaxle And Transmission)
- Transfer Case Fluid
- Vacuum Hoses
- Electrical Systems
- Engine Performance And Maintenance
- Notes
- Accessory Belts
- Air Filter Elements
- Air Filter Gaskets
- Air Filter Housings And Gaskets
- Air Pump Belts
- Batteries
- Battery Connectors
- Belt Idler Assemblies (Accessory And Cam Belts)
- Belt TENSIONERS (Accessory And Cam Belt)
- Chemical Engine DECARBONIZATION
- Combustion Chamber Cleaning
- Coolant Recovery Tanks
- Coolant
- Distributor Caps
- Distributor Rotors
- Engine Cooling Systems
- Engine DECARBONIZATION
- Engine Oil Drain Plugs And Gaskets
- Engine Oil Filters And Canisters
- Engine Oil
- Fuel Filters
- Fuel Injector Cleaning
- Fuel Injectors
- Fuel System Cleaning Service
- Hose Clamps
- Hose Connectors
- Hose Couplers
- Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
- Ignition Wires (Secondary)
- Intake Cleaning
- O2 Sensors
- PCV Breather Elements
- PCV Valves
- Radiator Caps And Pressurized Expansion Tank Caps
- Spark Plugs
- Thermostats And Housings
- Throttle Body Cleaning
- Timing Belts
- Vacuum Hoses, Tubes And Connections (Non-Metallic)
- Exhaust Systems
- Heating, Ventilation And Air Conditioning Systems
- Steering And Suspension, Wheel Alignment, Wheels And Tires
- Wheel & Tire Supplement
- Reason Code Explanation
- Automotive Terminology & Definitions
- Routine Inspection Reference Guide
- Check Lists
- OBD-II Drive Cycles
- Driveline/Axles
- Drive Axle Noise Diagnosis - General Information
- Gear Tooth Contact Patterns - General Information
- Map - Drive Train & Transmission
- Drive Train & Transmission Systems
- Drivetrain And Transmission
- Notes
- Actuators (Electrical)
- Actuators (Vacuum)
- Automatic Transmission / Transaxle Assemblies/CVTS
- Automatic Transmission Fluid
- Axles
- Bearings And Races
- Bell Cranks
- Bell Housings
- Bushings (External)
- Cables (Speedometer)
- Cables (TV, Detent And Shift)
- Carrier Bearings
- Clutch Cables And Cable Housings
- Clutch Discs (Manual Transmissions)
- Clutch Forks
- Clutch Linkages (Mechanical)
- Clutch Master Cylinders
- Clutch Pedals
- Clutch Pivots
- Clutch Pressure Plates
- Clutch Release Bearings
- Clutch Slave Cylinders (Concentric)
- Clutch Slave Cylinders (Conventional Or External)
- Companion Flanges
- Connectors
- Cooler Bypass Valves
- Cooler Lines
- Coolers
- CV Joints
- Differential And Final Drive Assemblies
- Differential Fluid
- Dip Stick Tubes
- Dip Sticks (Fluid Level Indicators)
- Dowel Pins, Guides And Pilot Holes
- Drain Plugs And Gaskets
- Drive Shaft Flanges
- Drive Shafts And Half Shafts
- Dust Boots
- Engine Mounts
- Exciter Rings
- Filler Tubes
- Filters And Screens
- Flanges
- Flex Plates
- Fluid Level Indicators
- Fluids And Lubricants
- Flywheels
- Force Motors
- Gaskets
- Guides
- Half Shafts
- Hoses, Lines, And Tubes
- Housings (Bell, Case, Tail(Extension) And Auxiliary)
- Hydraulic Fluid
- Intermediate Shaft Support Bearings
- Key Interlock Systems
- Limited Slips
- Lines
- Linkages (External)
- Locking Hub Assemblies
- Locking Hub Control Knobs
- Lubricants
- Manual Transmission Fluid
- Manual Transmission/Transaxle Assemblies
- Metal Clad Seals
- METALASTIC Joints
- Modulator Pins
- Modulators
- Mounts (Engine, Transaxle And Transmission)
- Odometer Drives (Mechanical)
- Odometer Heads (Mechanical)
- Oil Pans
- Pans
- Pilot Holes
- Pressure Plates
- Pressure Switches
- Races
- Rubber Joints (METALASTIC)
- Screens
- Seals (Metal Clad)
- Seals
- Selector Interlock Systems
- Sensors
- Servos
- Shift Interlock Systems (Selector And Key Interlock Systems)
- Side Covers
- Slip Yokes
- Solenoids
- Speed Sensors (Electronic Wheel And Vehicle)
- Speedometer- Driven Gear Housing
- Speedometer/Odometer Drives (Mechanical)
- Speedometer/Odometer Heads (Mechanical)
- Speedometers/Odometers (Electronic)
- Switches
- Tone Wheels
- Toothed Rings (Tone Wheel)
- Torque Converters
- Transaxle Mounts
- Transducers (Transmission)
- Transfer Case Assemblies
- Transfer Case Fluid
- Transmission Coolers
- Transmission Mounts
- Transmission Pans
- Transmission Range Indicators (PRNDL)
- Tubes
- Universal Joints (CARDAN Or Cross Type)
- Vacuum Controls
- Vacuum Hoses
- Vacuum Motors
- Vacuum-Operated Switches
- Vehicle Speed Sensors
- Vents
- Vibration Dampers
- Wheel Attachment Hardware
- Wheel Speed Sensors
- Wiring Harnesses And Connectors
- Yokes And Slip Yokes
- Reason Code Explanation
- Automotive Terminology & Definitions
- Trouble Shooting - Clutches - General Information
- DTC Index - 4.2L (BHF Engine)
- Electrical
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise control
- Battery, General Information
- Lead-Acid Battery without Visual Indicator
- Maintenance-Free Batteries
- Maintenance-Free Batteries
- Maintenance-Free Battery with Visual Indicator
- Maintenance-Free Battery with Visual Indicator, Checking
- Absorbent Glass Mat Battery without Visual Indicator
- Absorbent Glass Mat Battery, Checking
- Central Venting System
- Battery Post and Terminal, Handling Instructions
- Battery, Visual Inspection
- Maintenance-Free Battery with Visual Indicator, Checking Color Display
- Battery Electrolyte Level, Checking
- Battery, Testing
- Battery, Testing
- Battery, Testing with Midtronics Battery/Starting/Charging System Analyzer MCR340A
- Battery - Vehicles with Energy Management Control Module, Testing with Vehicle Diagnosis, Testing and Information System VAS 5051B
- Battery No-Load Voltage - Vehicles without Energy Management Control Module, Checking
- Battery No-Load Voltage - Vehicles with Energy Management Control Module, Checking
- Battery, Load Testing with Midtronics Diagnostic Conductance Charging Station INC-940
- Battery, Charging
- Generator, Testing and Servicing
- Generator, Testing and Servicing
- Generator, Testing
- Bosch Generator, through MY 2000, Assembly Overview
- Bosch Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Bosch Generator from MY 2001, Removing and Installing
- Carbon Brushes, Bosch Generator from MY 2001, Checking
- Valeo Generator, through MY 2000, Assembly Overview
- Valeo Generator, from MY 2001, Assembly Overview
- Voltage Regulator, Valeo Generator from MY 2001, Removing and Installing
- Carbon Brushes, Valeo Generator from MY 2001, Checking
- Ribbed Belt Pulley without Freewheel, Removing and Installing
- Ribbed Belt Pulley with Freewheel, Removing and Installing
- Cruise Control System, with Electronic Power Control
- 92 - Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Wiring Harnesses and Connectors, Repairing
- Wiring Harnesses and Connectors, Repairing
- Vehicle Electrical System, General Information
- Wiring Harness and Connector Repairs, General Information
- Airbag and Safety Belt Tensioner Wiring, Repairing
- CAN-Bus Wiring, Repairing
- Wire, 0.25 mm with Individual Crimp Connector, Repairing
- Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
- Wire, 0.25 mm with Intermediate Wire Section, Repairing
- Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
- Terminal Housings and Connectors, Repairing
- Terminal Housings, Releasing and Disassembling
- Antenna Wires, Repairing
- Fiber Optic Cable
- Vehicle Diagnosis, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Map - Electrical Systems
- Electrical Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Actuator Motors (Electric)
- Actuator Motors (Vacuum)
- Air Bags
- Alternators And Generators
- Amplifiers
- Antennas
- Batteries
- Battery Cables, Wires And Connectors
- Battery Cables
- Battery Trays And Hold Down Hardware
- Battery Wires
- Belts
- Bulb Sockets
- Bulbs, Sealed Beams And LEDS
- Cd Players
- Cigarette Lighter Assemblies
- Circuit Breakers
- Clutch Switches
- Connectors
- Control Modules
- Cruise Control Brake Switches
- Cruise Control Cables
- Cruise Control Clutch Switches
- Cruise Control Linkages And Cables
- Cruise Control Reservoirs
- Cruise Control Tubes
- Cruise Control Vacuum Dump Release Valves
- Cruise Control Vacuum Hoses, Tubes And
- Cruise Control Vehicle Speed Sensors
- Defoggers
- Defrosters
- Delays
- Dimmers
- Electric Heaters
- Equalizers
- Fuse Blocks
- Fuse Boxes And Blocks
- Fuses, Fusible Links And Circuit Breakers
- Fusible Links
- Gauges
- Generators
- Ground Cables And Straps
- Ground Straps
- Headlight Adjusters
- Heating Elements (Defrosters, Defoggers, Electric Heaters And Seats)
- Horns And Sirens
- Ignition Switches
- Indicator Lights
- Keyless Entry Keypads And Transmitters
- Keyless Entry Transmitters
- LEDS
- Lenses
- Microphones
- Mirrors (ELECTROCHROMATIC And Heated)
- Motors
- Neutral Safety Switches
- Odometers, Speedometers And Tachometers (Cable Driven)
- Odometers
- Power Distribution Center
- Pulleys
- Receivers, Amplifiers, Equalizers And Sub-Woofer Volume Controls
- Relay Boxes
- Relays
- Sealed Beams
- Seat Heaters
- Security Alarm Sensors
- Sirens
- Solenoids
- Speakers And Microphones
- Speedometer And Tachometer Linkages And Cables
- Speedometer Cables
- Speedometers
- Starters
- Sub-Woofer Volume Control
- Switches
- Tachometer Cables
- Tachometers
- Tape Players And Cd Players
- TENSIONERS
- Timers
- Transceivers
- Transducers
- Vacuum Accumulators (Reservoirs)
- Voltage Regulators
- Washer Fluid Level Senders
- Washer Pumps
- Wiper Arms And Blades
- Wiper Blades
- Wiper Hoses And Nozzles
- Wiper Linkages
- Wiper Nozzles
- Wiper Pump Reservoirs
- Wiring Harnesses And Connectors
- Battery, Starting & Charging System CHECKSHEET
- Reason Code Explanation
- Automotive Terminology & Definitions
- Electrical Systems
- Using lemon2025'S System Wiring Diagrams
- Electrical Equipment - General Information
- Engine
- Engine Overhaul Procedures - General Information
- * Please Read This First *
- Description
- Engine Identification
- Inspection Procedures
- Cleaning Procedures
- Component Cleaning
- Cylinder Head Replacement
- Cylinder Head Overhaul
- Pistons, Connecting Rods & Bearings
- Crankshaft & Main Bearings
- Camshaft
- Timing Chains & Belts
- Timing Gears
- Oil Pump
- Break-In Procedure
- General Cooling System Service - General Information
- Engine Overhaul Procedures - General Information
- Engine Performance
- Electrostatic Discharge Warning - General Information
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Map - Engine Performance & Maintenance
- Engine Performance And Maintenance (Including Exhaust Systems)
- Engine Performance & Maintenance CHECKSHEET
- Engine Performance And Maintenance
- Notes
- Accelerator Pedal Position Sensor
- Accessory Belts
- Accessory Pulleys
- Air Conditioning Cycling Switches
- Air Conditioning Pressure Sensors
- Air Ducts And Tubes
- Air Filter Elements
- Air Filter Gaskets
- Air Filter Housings And Gaskets
- Air Fuel Ratio Sensors
- Air Injection Control Solenoids
- Air Plenums
- Air Pump Belts
- Air Pumps (Electric Driven)
- Air Tubes
- Aspirator, Check And DECEL Valves
- Baffles
- Ballast Primary Supply Resistor Wires
- Ballast Resistors And Primary Supply Resistors
- Barometric Pressure Sensors
- Batteries
- Battery Cables, Wires And Connectors
- Battery Connectors
- Battery Trays And Hold Down Hardware
- Battery Wires
- Belt Idler Assemblies (Accessory And Cam Belts)
- Belt TENSIONERS (Accessory And Cam Belt)
- Belt-Driven Air Pumps
- Boost Control Mechanism
- Camshaft Position Sensors
- Carburetors And Chokes
- Casting Core Plugs And Expansion Plugs
- Charge Air Coolers ""INTERCOOLERS"" (CAC)
- Check Valves
- Chemical Engine DECARBONIZATION
- Chokes
- Clutch Pedal Position Switches
- Cold Start Injectors
- Combustion Chamber Cleaning
- Connectors
- Coolant Recovery Tanks
- Coolant
- Cooling Fan Motor Modules
- Cooling Fan Motor Relays And Modules
- Cooling Fan Motor Resistors
- Cooling Fan Motor Sensors And Switches
- Cooling Fan Motor Switches
- Cooling Fan Motors
- Crankshaft Position Sensors
- Cylinder Deactivation Solenoid
- Cylinder Head Assemblies
- DECEL Valves
- Deflectors
- Dip Stick Tubes
- Dip Sticks And Tubes
- Distributor Advances And Retarders (Mechanical And Vacuum)
- Distributor Boots And Shields
- Distributor Caps
- Distributor Retarders (Mechanical And Vacuum)
- Distributor Rotors
- Distributor Shields
- Distributors
- Early Fuel Evaporation Valves (Heat Riser Assemblies)
- EGR Coolers
- EGR Exhaust Manifold Passages
- EGR Intake And Exhaust Manifold Passages
- EGR Plates And Coolers
- Electronic Spark Control Modules
- Electronic Transmission Control Devices
- Electronic Transmission Feedback Devices
- Engine Coolant Temperature Sensors
- Engine Cooling Systems
- Engine Covers (Oil Pan, Valve Cover, Timing Cover)
- Engine DECARBONIZATION
- Engine Oil Canisters
- Engine Oil Coolers (External)
- Engine Oil Drain Plugs And Gaskets
- Engine Oil Filters And Canisters
- Engine Oil Gaskets
- Engine Oil Pressure Gauges (Mechanical)
- Engine Oil
- Evaporative Emissions (EVAP) Canister Filters
- Evaporative Emissions (EVAP) Canister Purge Devices
- Evaporative Emissions (EVAP) Canisters
- Evaporative Emissions (EVAP) Feedback Devices
- Exhaust Gas RECIRCULATION Devices
- Exhaust Gas RECIRCULATION Feedback Devices
- Expansion Plugs
- Fan Control Sensor
- Fuel Accumulators And Dampers
- Fuel And Cold Start Injectors
- Fuel Caps
- Fuel Dampers
- Fuel Delivery Check Valves
- Fuel Distributors (BOSCH Cis)
- Fuel Filler Necks And RESTRICTORS
- Fuel Filters
- Fuel Injector Cleaning
- Fuel Injectors
- Fuel Level Senders
- Fuel Pressure Regulators
- Fuel Pumps (In-Tank, External, Electrical Or Mechanical)
- Fuel Rails
- Fuel RESTRICTORS
- Fuel System Cleaning Service
- Fuel Tanks
- Fuel
- Gaskets
- Grommets (Valve Cover)
- Harmonic Dampers
- Heater Control Valves
- Heater Cores
- Hose Clamps
- Hose Connectors
- Hose Couplers
- Hoses And Tube Couplers, Connectors And Clamps
- Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
- Housings
- Idle Air Controls
- Idle Speed Control Actuators
- Ignition Boots
- Ignition Coil Towers
- Ignition Coils
- Ignition Control Modules (ICM)
- Ignition Switches
- Ignition Terminals
- Ignition Wires (Secondary)
- Inertia Fuel Shut-Off Switches
- Intake Air Temperature Sensors
- Intake Cleaning
- Intake Manifolds
- In-Tank Fuel Strainers
- INTERCOOLERS
- Knock Sensors
- Liquid Vapor Separators
- Long Block Assemblies
- Manifold Absolute Pressure (Map) Sensors
- Mass Air Flow (MAF) Sensors
- Metal Air Manifolds And Pipes
- Metal Air Pipes
- Mix Control Solenoids
- Motor Mounts
- O2 Sensors
- Oil Pans
- Oil Pressure Sending Units
- Oil Pump Pick-Up Screens
- Oil Pumps
- O-Rings, Gaskets, Seals And Spring Locks
- Park Neutral Position Switches
- PCV Breather Elements
- PCV Orifices
- PCV Valves
- Pick-Up Assemblies (Includes Magnetic, Hall Effect And Optical)
- Power Steering Pressure Sensors
- Powertrain Control Modules (Pcm) And Prom
- Powertrain Control Prom
- Pressurized Expansion Tank Caps
- Radiator / Cooling Fan Blades
- Radiator / Cooling Fan Clutches
- Radiator Caps And Pressurized Expansion Tank Caps
- Radiators
- Roll Over Valves
- Sealing Compounds
- Seals
- Secondary Air Injection System Management Devices
- Sensors
- Short Block Assemblies
- Shrouds, Baffles And Deflectors
- Spark Plugs
- Spring Locks
- Super Chargers
- Switches
- Thermal Vacuum Valves
- Thermostatic Air Door Assemblies
- Thermostats And Housings
- Throttle Bodies
- Throttle Body Cleaning
- Throttle Cables
- Throttle Linkages And Cables
- Throttle Position Sensors
- Throttle Position Switches
- Timing Belt Sprockets
- Timing Belts
- Timing Covers
- Torque Struts
- Transmission Range Switches
- Tube Clamps
- Tube Connectors
- Tube Couplers
- Tubes
- Turbo Chargers
- Vacuum Connections
- Vacuum Hoses, Tubes And Connections (Non-Metallic)
- Vacuum Regulator Solenoids
- Vacuum Tubes
- Valve Covers
- Vehicle Speed Senors
- Volume Air Flow Sensors
- Waste Gate And Boost Control Mechanisms
- Waste Gate Control Solenoids
- Water Pumps (Electric)
- Water Pumps (Non-Electric)
- Wiring Harnesses And Connectors
- Reason Code Explanation
- Automotive Terminology & Definitions
- Parasitic Load Explanation & Test Procedures - General Information
- State Emission Standards - Diesel
- State Emission Standards - Gas
- ALASKA
- ARIZONA
- CALIFORNIA
- Colorado
- CONNECTICUT
- DELAWARE
- District Of COLUMBIA
- GEORGIA
- IDAHO
- ILLINOIS
- INDIANA
- KENTUCKY
- MARYLAND
- MASSACHUSETTS
- MISSOURI
- NEVADA
- New Jersey
- New MEXICO
- New YORK
- North CAROLINA
- OHIO
- OREGON
- PENNSYLVANIA
- RHODE Island
- TENNESSEE
- TEXAS
- UTAH
- VIRGINIA
- WASHINGTON
- WISCONSIN
- U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
- U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
- U.S. EPA Im240 Emission Standards
- Waveforms - Injector Pattern Tutorial - General Information
- * Please Read This First *
- Purpose Of This Article
- Is A Lab Scope Necessary?
- The Two Types Of Injector Drivers
- The Two Ways Injector Circuits Are Wired
- Interpreting Injector Waveforms
- Current Waveform Samples
- Notes
- Example #1 - Voltage Controlled Driver
- Example #2 - Voltage Controlled Driver
- Example #3 - Voltage Controlled Driver
- Example #4 - Current Controlled Driver
- Example #5 - Current Controlled Driver
- Example #6 - Current Controlled Driver
- Example #7 - Current Controlled Driver
- Example #8 - Current Controlled Driver
- Voltage Waveform Samples
- Notes
- Example #1 - Voltage Controlled Driver
- Example #2 - Voltage Controlled Driver
- Example #3 - Voltage Controlled Driver
- Example #4 - Current Controlled Driver
- Example #5 - Current Controlled Driver
- Example #6 - Current Controlled Driver
- Example #7 - Current Controlled Driver
- Example #8 - Current Controlled Driver
- Map - Exhaust Systems
- Exhaust Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Catalytic Converters
- Exhaust And Tail Pipes
- Exhaust Connections
- Hangers
- Heat Risers (Mechanical EFE Devices)
- Heat Shields
- Manifolds (Cast And Tube Type)
- Mechanical EFE Devices
- Muffler Valve
- Mufflers And Resonators
- Reason Code Explanation
- Exhaust Systems
- Heating, Ventilation & A/C (HVAC)
- Map - Heating, Ventilation, & Air Conditioning
- Heating, Ventilation & Air Conditioning Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Accumulators
- Actuators (Electrical)
- Actuators (Vacuum)
- Air Conditioning Fittings
- Air Conditioning Hoses
- Air Conditioning Metal Lines
- Air Control Doors
- Air Dams (External)
- Air Distribution System
- Belts
- Blend Doors
- Blower Fans (Blower Wheel Or Squirrel Cage)
- Blower Motors
- Blower Resistors
- Blower Switches
- Cabin Air Filters
- Circuit Breakers
- Compressor Clutch Assemblies
- Compressors
- Condenser Air Seals
- Condenser Fan Motors
- Condensers
- Connectors
- Control Cables
- Control Heads (Function Selectors)
- Control Linkages
- Control Modules
- Coolant
- Cooling Fan Blades
- Cooling Fan Clutches
- Cooling Fan Motors
- Evaporator Drain Tubes
- Evaporator Filters
- Evaporator Pressure Regulators (EPRS)
- Evaporators
- Expansion Valves
- Function Selectors
- Fuses, Fusible Links And Circuit Breakers
- Fusible Links
- Gaskets
- Heater Cases
- Heater Control Valves
- Heater Cores
- Heater Hoses
- High Pressure Relief Valves (HPRV)
- Idlers
- In-Line Filters
- Metal Fittings
- Metal Lines
- Mix And Air Control Doors (Blend Doors)
- ORIFACE Tubes
- O-Rings
- Pilot-Operated Absolutes (POAS)
- Plenums
- Pressure Control Valves
- Pressure Sensors
- Pulleys
- Radiators
- Receiver-DRIERS
- Refrigerant Oil
- Refrigerant
- Relays
- Seals
- Service Ports
- Spring Lock Couplings
- Suction Throttling Valves (STVS)
- Switches (Electrical)
- TENSIONERS
- Thermistors And Pressure Sensors
- Thermostats And Housings
- Vacuum Hoses And Tubes
- Vacuum Reservoirs
- Vacuum Tubes
- Valves In Receiver (VIRS)
- Water Pumps (Electric Auxiliary)
- Wiring Harnesses And Connectors
- Heating, Ventilation & Air Conditioning System CHECKSHEET
- Reason Code Explanation
- Automotive Terminology & Definitions
- Heating, Ventilation & Air Conditioning Systems
- Map - Heating, Ventilation, & Air Conditioning
- Identification
- Metric Conversions
- Reset Procedures
- BARTEC TPMS Reset Procedure (Direct TPM System)
- Maintenance Reminder Light (Reset Procedures)
- Emissions Maintenance Reminder (EGR)
- Emissions Maintenance Reminder (Oxygen Sensor)
- Maintenance Service Reminder
- Notes
- Maintenance Service Reminder Reset - Procedure 01
- Maintenance Service Reminder Reset - Procedure 02
- Maintenance Service Reminder Reset - Procedure 03
- Maintenance Service Reminder Reset - Procedure 04
- Maintenance Service Reminder Reset - Procedure 05
- Maintenance Service Reminder Reset - Procedure 06
- Maintenance Service Reminder Reset - Procedure 07
- Maintenance Service Reminder Reset - Procedure 08
- Maintenance Service Reminder Reset - Procedure 09
- Maintenance Service Reminder Reset - Procedure 10
- Maintenance Service Reminder Reset - Procedure 11
- Maintenance Service Reminder Reset - Procedure 12
- Maintenance Service Reminder Reset - Procedure 13
- Tire Pressure Monitor System Reminder
- Notes
- TPMS Reminder Reset - Procedure 01
- TPMS Reminder Reset - Procedure 02
- TPMS Reminder Reset - Procedure 03
- TPMS Reminder Reset - Procedure 04
- TPMS Reminder Reset - Procedure 05
- TPMS Reminder Reset - Procedure 06
- TPMS Reminder Reset - Procedure 07
- TPMS Reminder Reset - Procedure 08
- TPMS Reminder Reset - Procedure 09
- TPMS Reminder Reset - Procedure 10
- Restraints
- Specifications Index
- Steering
- Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
- Steering & Suspension Systems
- Wheel And Tire
- Steering & Suspension CHECKSHEET
- Wheels & Tires CHECKSHEET
- Steering And Suspension, Wheel Alignment, Wheels And Tires
- Notes
- Active Handling
- Active Suspension Control Modules
- Active Variable Ratio Steering
- Active Yaw Control
- Adaptive Cruise Control
- Advance TRAC
- Air Bags
- Air Ride Control Modules
- Air Ride Suspension Torsion Springs (Counter Balancing)
- Air Ride Suspension
- Air Ride Tubes
- Air Shocks And Air Struts
- Air Spring Valves
- Air Springs
- Air Suspension Control Valves
- Air Suspension DRIERS
- Axle Acceleration Sensor
- Ball Joints
- Body Acceleration Sensor
- Bushings
- Center Links
- Compressors
- Continuous Damping Control
- Control Arm Shafts
- Control Arms
- Control Modules
- Distance Regulation Control Module
- Distance Regulation Sensor
- Drag Links
- Dynamic Stability Control
- Dynamic Stability Traction Control
- Electronic Ride Control Shocks And Struts
- Electronic Stability Control
- Electronic Suspension System
- Flex Couplers
- Gaskets
- Height Sensors
- Hydraulic Hoses
- Hydraulic Power Steering Pumps
- Hydraulic Suspension Hoses
- Hydraulic Suspension Pumps
- Idler Arms
- Intermediate Shaft U-Joints
- King Pins
- Modules
- Pitman Arms
- Power Steering Belts
- Power Steering Coolers
- Power Steering Fluid
- Power Steering Hoses
- Power Steering Lines (Steel)
- Power Steering Pumps - Electric
- Power Steering Pumps
- Radar Sensor
- Radius Arms
- Relay Rods
- Relays
- Sensors
- Shock Absorbers, Strut Cartridges And Strut Assemblies
- Spindles
- Springs, Coil, Leaf And Torsion Bars
- STABILITRAC
- Stability Management System
- Steering Angle Sensor
- Steering Arms
- Steering Couplers
- Steering Dampers
- Steering Gears (Except Rack And Pinion)
- Steering Gears, Rack And Pinion
- Steering Knuckles
- Strike Out Bumpers
- Strut Bearing Plate Assemblies
- Strut Rods
- Suspension Pumps (Hydraulic)
- Sway Bar Links
- Sway Bar Mounting Bushings
- Sway Bars
- Switches
- Tie Rod Ends (Inner And Outer)
- Tire Pressure Monitoring System
- Tire Pressure Sensors
- Tires
- Torque Sensor
- Torsion Springs
- Track Bar Bushings
- Track Bars
- Trailing Arm Bushings
- Trailing Arms
- Valve Stems
- Vehicle Dynamics Control
- Vehicle Speed Sensor
- Vehicle Stability Assist
- Vehicle Stability/Skid Control
- Warning Lamps
- Wheel Alignment
- Wheel Attachment Hardware
- Wheel Bearings, Races And Seals
- Wheels (Rims)
- Wiring Harnesses And Connectors
- Reason Code Explanation
- Automotive Terminology & Definitions
- Wheel Alignment Theory & Operation - General Information
- Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
- Trouble Shooting - Manual Transmission - General Information
- Heating, Ventilation & A/C (HVAC)
- A/C Compressor
- Heating & Air Conditioning
- 87 Air conditioning
- Safety precautions
- A/C system, general repair guidelines
- Refrigerant system, servicing
- Compressor, removing and installing from bracket
- Belt pulley/drive unit of compressor, replacing
- Belt pulley (version "1"), replacing
- Belt pulley, removing from compressor and reinstalling (version "1")
- Belt pulley (version "2"), replacing
- Belt pulley, removing from compressor and reinstalling (version "2")
- Compressor drive unit, checking, replacing
- Compressor drive shaft, loosening and tightening
- Compressor drive shaft, removing and installing
- Drive plate with overload protection, removing and installing
- Run-out of drive plate with overload protection, checking and adjusting
- Drive plate to compressor, removing and installing
- Drive plate with roller bearing, removing and installing
- A/C system control and regulation components
- A/C system control and regulation components
- Components in engine compartment and rear of vehicle
- Dust and pollen filter element, removing and installing
- Dust and pollen filter with active-carbon-filter element
- Air Quality Sensor G238, removing and installing
- Air extraction vent, checking
- Components in passenger compartment
- Climatronic Control Module J255, removing and installing
- Air guide connection for glove compartment cooling, removing and installing
- Fresh Air Blower Control Module J126 and Fresh Air Blower V2, removing and installing
- Left Vent Temperature Sensor G150, removing and installing
- Right Vent Temperature Sensor G151, removing and installing
- Evaporator Vent Temperature Sensor G263, removing and installing
- Left Footwell Vent Temperature Sensor G261, removing and installing
- Right Footwell Vent Temperature Sensor G262, removing and installing
- Sunlight Photo Sensor G107, removing and installing
- Evaporator housing drain, removing and installing
- Evaporator housing drain, checking
- Adapter cable, modifying to activate positioning motors
- Defroster Flap Motor V107, removing and installing
- Right Temperature Flap Motor V159, removing and installing
- Left Temperature Flap Motor V158, removing and installing
- Central Air Flap Motor V70, removing and installing
- Recirculation Flap Motor V113, removing and installing
- Air Flow Flap Motor V71, removing and installing
- Fresh Air Intake Duct Temperature Sensor G89, removing and installing
- Instrument panel vents and air guides
- Heating core, removing and installing
- A/C refrigerant system, testing
- A/C refrigerant system, servicing
- A/C refrigerant system, servicing
- A/C refrigerant system, component overview
- Connections of refrigerant lines to the components (different versions)
- Refrigerant lines on evaporator flange, removing and installing
- Refrigerant lines for condenser, removing and installing
- Condenser, removing and installing
- Restrictor, removing and installing
- Accumulator, removing and installing
- A/C refrigerant system, capacities
- Compressor, removing and installing
- Heating and A/C unit, removing and installing
- Heating and A/C unit, component overview
- 87 Air conditioning
- Heating & Air Conditioning
- General Servicing
- Cabin Air Filter
- Refrigerant R134A - Servicing
- 87 - Air conditioning
- Laws and Regulations
- General Information
- Notes
- Introduction
- Air Conditioning System Principles
- Refrigerant R134a
- Refrigerant R134a Properties
- Refrigerant Oil
- Air Conditioning System, Operation
- General Work Safety
- Product Properties
- Refrigerant, Handling
- Pressure Vessels, Handling
- Safety Regulations for Working with Extraction and Charging Systems
- R134a Safety Precautions
- Basic Rules for Working on Refrigerant Circuit
- Refrigerant Circuit and Components
- Notes
- Components
- Refrigerant Circuit Design
- Refrigerant Circuit Quick-Release Connections
- Refrigerant Circuit Switches, Sensors, and Related Connections
- Refrigerant Circuit Pressures and Temperatures
- Refrigerant Circuit with Expansion Valve
- Refrigerant Circuit with Restrictor and Reservoir
- Using Pressure Gauge
- Service and Recycling Units
- Refrigerant Circuit Repair Information
- Refrigerant Circuit
- Notes
- Important Repair Notes
- Refrigerant Circuits, Converting from R12 Refrigerant to R134a
- Working with A/C Service Station
- Refrigerant Circuit, Discharging with A/C Service Station
- Refrigerant Circuit, Evacuating with A/C Service Station
- Refrigerant Circuit, Charging with A/C Service Station
- Air Conditioner, Starting after Charging
- Transferring Refrigerant to Charging Cylinder or Reservoir Bottle
- A/C Service Station, Draining
- Refrigerant Circuit, Flushing with Compressed Air and Nitrogen
- Refrigerant Circuit, Flushing with Refrigerant R134a
- Refrigerant Circuit, Determining Leaks
- Possible Refrigerant Circuit Concerns
- A/C Service Station, Connecting
- Refrigerant Circuit, Checking Pressures with A/C Service Station
- Notes
- Pressure Checking, Vehicles with Restrictor and Reservoir with Internally Regulated Compressor
- Pressure Checking, Vehicles with Expansion Valve and Receiver with Internally Regulated Compressor
- Pressure Checking, Vehicles with Restrictor, Reservoir and A/C Compressor Regulator Valve with Externally Regulated Compressor
- Pressure Checking, Vehicles with Expansion Valve, Receiver, and A/C Compressor Regulator Valve with Externally Regulated Compressor
- Refrigerant Circuit Components, Replacing
- Notes
- Leaking or Damaged Components except Compressor, Reservoir, or Receiver
- Compressor, Replacing without Flushing Refrigerant Circuit
- Compressor, Replacing Due to Leakage or Internal Damage
- Receiver or Accumulator and Restrictor, Replacing after Cleaning Refrigerant Circuit
- Receiver or Reservoir, Replacing without Flushing Refrigerant Circuit
- Refrigerant R134a/Refrigerant Oil Capacities and Specifications
- Notes
- Refrigerant R134a Capacities
- Notes
- Capacities for Audi A2 (8Z_) from 2001
- Capacities for Audi A3 (8L_) 1997 to 2004 and Audi TT (8N_) from 1999
- Capacities for A3 (8P_) from 2004
- Capacities for Audi 80 (8A_/8C_), Audi Coupe (8B_), Audi Cabriolet (8G_) through 2002
- Capacities for Audi A4 (8D_) 1995 to 2002
- Capacities for Audi A4 (8E_) from 2001, Audi A4 Cabriolet (8H_) from 2003
- Capacities for Audi 100/Audi A6 (4A_) through 1998
- Capacities for Audi A6 (4B_) from 1998 and Audi Allroad
- Capacities for Audi A6 (4F_) from 2005
- Capacities for Audi V8 (4C_) to 1994
- Capacities for Audi A8 (4D_) 1994 to 2002
- Capacities for Audi A8 (4E_) from 2003
- Capacities for Audi Q7 (4L_) from 2006
- Approved Refrigerant Oils
- Notes
- Refrigerant Oil Capacities
- Capacities for Audi A2 (8Z_) from 2001
- Capacities for Audi A3 (8L_) 1997 to 2004 and Audi TT (8N_) from 1999
- Capacities for Audi A3 (8P_) from 2004
- Capacities for Audi 80 (8A_/8C_), Audi Coupe (8B_), Audi Cabriolet (8G_)
- Capacities for Audi A4 (8D_) 1995 to 2002
- Capacities for Audi A4 (8E_) from 2001, Audi A4 Cabriolet (8H_) from 2003
- Capacities for Audi 100/Audi A6 (4A_) from 1998
- Capacities for Audi A6 (4B_) from 1998 and Audi Allroad
- Capacities for Audi A6 (4F_) from 2005
- Capacities for Audi V8 (4C_) to 1994
- Capacities for Audi A8 (4D_) 1994 to 2002
- Capacities for Audi A8 (4E_) from 2003
- Capacities for Audi Q7 (4L_) from 2006
- Testing Equipment, Tools and Materials
- 87 - Air conditioning
- HVAC Control Systems
- Air Conditioning
- Safety precautions
- A/C system, general repair guidelines
- Refrigerant system, servicing
- Compressor, removing and installing from bracket
- Belt pulley/drive unit of compressor, replacing
- Belt pulley (version 1), replacing
- Pulley, removing from compressor and re-installing (version 1)
- Belt pulley (version 2), replacing
- Pulley, removing from compressor and re-installing (version "2")
- Compressor drive unit, checking, replacing
- Compressor drive shaft, loosening and tightening
- Compressor drive shaft, removing and installing
- Drive plate with overload protection, removing and installing
- Run-out of drive plate with overload protection, checking and adjusting
- Drive plate to compressor, removing and installing
- Drive plate with roller bearing, removing and installing
- A/C system control and regulation components
- Notes
- Components in engine compartment and rear of vehicle
- Dust and pollen filter element, removing and installing
- Dust and pollen filter with active-carbon-filter element
- Sensor for air quality -G238-, removing and installing
- Air extraction vent, checking
- Components in passenger compartment
- A/C control head -E87-, removing and installing
- Air guide connection for glove compartment cooling, removing and installing
- Control module for fresh air blower -J126- and Fresh Air Blower -V2-, removing and installing
- Left Vent Temperature Sensor -G150-, removing and installing
- Right Vent Temperature Sensor -G151-, removing and installing
- Evaporator Vent Temperature Sensor -G263-, removing and installing
- Left Footwell Vent Temperature Sensor -G261-, removing and installing
- Right Footwell Vent Temperature Sensor - G262-, removing and installing
- Sunlight Photo Sensor -G107-, removing and installing
- Evaporator housing drain, removing and installing
- Evaporator housing drain, checking
- Adapter cable, modifying to activate positioning motors
- Defroster flap motor -V107-, removing and installing
- Actuator for temperature flap right -V159-, removing and installing
- Actuator for temperature flap left -V158-, removing and installing
- Central Air Flap Motor -V70-, removing and installing
- Recirculation Flap Motor -V113-, removing and installing
- Air Flow Flap Motor -V71-, removing and installing
- Fresh Air Intake Duct Temperature Sensor -G89-, removing and installing
- Heater core, removing and installing
- Instrument panel vents and air ducts
- A/C refrigerant system, testing
- A/C refrigerant system cooling performance, testing
- Special tools and equipment
- Test requirements:
- Checking
- Identifying malfunctions if specified values are not obtained
- Notes
- Identifying malfunctions at temperature increase behind condenser
- A/C refrigerant system, leak testing
- A/C refrigerant system, testing with pressure gauges
- A/C refrigerant system, checking pressures
- Notes
- Test requirements
- Preparation work
- Checking
- If A/C refrigerant system base pressure is less than specified on chart, system is low on refrigerant:
- If A/C refrigerant system pressure corresponds to or is higher than base pressure specified on chart:
- Pressure in A/C system corresponds to chart or is higher:
- A/C refrigerant system (R-134a), discharging
- A/C refrigerant system (R-134a), evacuating and recharging
- A/C refrigerant system (R-134a), flushing with compressed air and nitrogen
- A/C refrigerant system cooling performance, testing
- A/C refrigerant system, servicing
- Compressor, removing and installing
- Refrigerant lines on compressor, removing and installing
- Compressor, removing and installing (for vehicles with a 4 or 6 cyl. engine)
- Compressor, removing and installing (vehicles with 8 cyl. engine)
- A/C system, running after installing compressor
- Refrigerant lines on evaporator flange, removing and installing
- Refrigerant lines for condenser, removing and installing
- Condenser, removing and installing
- Restrictor, removing and installing
- Accumulator, removing and installing
- A/C refrigerant system, capacities
- Heating and A/C unit, component overview
- A/C system, troubleshooting
- Test requirements
- A/C does not cool (cooling has stopped completely)
- Insufficient cooling during all driving or engine speed (RPM)
- A/C compressor noisy
- A/C compressor noisy immediately after switching A/C ON and/or when driving around corners or braking "refrigerant shock"- refrigerant system overcharged:
- With an otherwise properly operating A/C system, water sprays out of instrument panel vents:
- A/C system, replacing components
- Notes
- For leaking or damaged components (except for compressor and accumulator), A/C system was completely empty (no charge):
- For leaky or damaged components (except for the compressor and accumulator) there is still refrigerant in the A/C system:
- Replace compressor, without it being necessary to blow through the refrigerant system with compressed air and nitrogen (e.g. exterior damage after an accident):
- Replace compressor due to leaks or interior damage (e.g. noises or no power):
- Replace accumulator and restrictor after blowing through the A/C system e.g. caused by penetrating moisture (the A/C system was open over a long period of time) or contamination (dirt):
- Replace accumulator, without it being necessary to blow through A/C system with compressed air and nitrogen (e.g. damage caused by an accident), no refrigerant flowed out and no moisture and dirt have penetrated the circuit:
- Heating & Air Conditioning
- 87 Air conditioning
- Safety precautions
- A/C system, general repair guidelines
- Refrigerant system, servicing
- Compressor, removing and installing from bracket
- Belt pulley/drive unit of compressor, replacing
- Belt pulley (version "1"), replacing
- Belt pulley, removing from compressor and reinstalling (version "1")
- Belt pulley (version "2"), replacing
- Belt pulley, removing from compressor and reinstalling (version "2")
- Compressor drive unit, checking, replacing
- Compressor drive shaft, loosening and tightening
- Compressor drive shaft, removing and installing
- Drive plate with overload protection, removing and installing
- Run-out of drive plate with overload protection, checking and adjusting
- Drive plate to compressor, removing and installing
- Drive plate with roller bearing, removing and installing
- A/C system control and regulation components
- A/C system control and regulation components
- Components in engine compartment and rear of vehicle
- Dust and pollen filter element, removing and installing
- Dust and pollen filter with active-carbon-filter element
- Air Quality Sensor G238, removing and installing
- Air extraction vent, checking
- Components in passenger compartment
- Climatronic Control Module J255, removing and installing
- Air guide connection for glove compartment cooling, removing and installing
- Fresh Air Blower Control Module J126 and Fresh Air Blower V2, removing and installing
- Left Vent Temperature Sensor G150, removing and installing
- Right Vent Temperature Sensor G151, removing and installing
- Evaporator Vent Temperature Sensor G263, removing and installing
- Left Footwell Vent Temperature Sensor G261, removing and installing
- Right Footwell Vent Temperature Sensor G262, removing and installing
- Sunlight Photo Sensor G107, removing and installing
- Evaporator housing drain, removing and installing
- Evaporator housing drain, checking
- Adapter cable, modifying to activate positioning motors
- Defroster Flap Motor V107, removing and installing
- Right Temperature Flap Motor V159, removing and installing
- Left Temperature Flap Motor V158, removing and installing
- Central Air Flap Motor V70, removing and installing
- Recirculation Flap Motor V113, removing and installing
- Air Flow Flap Motor V71, removing and installing
- Fresh Air Intake Duct Temperature Sensor G89, removing and installing
- Instrument panel vents and air guides
- Heating core, removing and installing
- A/C refrigerant system, testing
- A/C refrigerant system, servicing
- A/C refrigerant system, servicing
- A/C refrigerant system, component overview
- Connections of refrigerant lines to the components (different versions)
- Refrigerant lines on evaporator flange, removing and installing
- Refrigerant lines for condenser, removing and installing
- Condenser, removing and installing
- Restrictor, removing and installing
- Accumulator, removing and installing
- A/C refrigerant system, capacities
- Compressor, removing and installing
- Heating and A/C unit, removing and installing
- Heating and A/C unit, component overview
- 87 Air conditioning
- On Board Diagnostic (OBD)
- Automatic Climate Control System, On Board Diagnostic (OBD)
- Notes
- On Board Diagnostic (OBD), technical data
- Function
- Safety precautions
- VAS 5051 Vehicle Diagnostic, Testing and Information System, connecting and selecting functions
- Diagnostic Trouble Code (DTC) Memory, checking (function 02)
- Diagnostic Trouble Code (DTC) table
- DTC table up to DTC "00975"
- DTC table from DTC "01044"
- Output Diagnostic Test Mode (DTM) (function 03)
- Basic Setting (function 04)
- Diagnostic Trouble Code (DTC) Memory, erasing (function 05)
- End Output (function 06)
- A/C control head -E87-, coding (function 07)
- Read Measuring Value Block (function 08)
- Overview of selectable display group numbers
- Measuring value blocks 001 to 010
- Measuring value blocks from display group 011 through 019
- Measuring value blocks from display group 020
- Display groups currently not to be used by dealerships
- A/C Control Head -E87-, Adaptation (function 10)
- Adaptation (function 10) in channel 03, performing
- Adaptation of fresh air blower RPM decrease, performing (adaptation channel 08)
- Adaptation of Vehicle Identification Number (VIN), performing (adaptation channel 81)
- CAN-bus comfort system, checking
- Automatic Climate Control System, electrical testing
- Wiring and component testing using VAG 1598 A test box
- Test step 1 to 4
- Test steps 5 to 9
- Components activated by A/C control head -E87-, electrical testing
- Windshield defroster
- Sensor for air quality -G238-
- Automatic Climate Control System, On Board Diagnostic (OBD)
- Refrigerant R134A - Servicing
- 87 - Air conditioning
- Laws and Regulations
- General Information
- Notes
- Introduction
- Air Conditioning System Principles
- Refrigerant R134a
- Refrigerant R134a Properties
- Refrigerant Oil
- Air Conditioning System, Operation
- General Work Safety
- Product Properties
- Refrigerant, Handling
- Pressure Vessels, Handling
- Safety Regulations for Working with Extraction and Charging Systems
- R134a Safety Precautions
- Basic Rules for Working on Refrigerant Circuit
- Refrigerant Circuit and Components
- Notes
- Components
- Refrigerant Circuit Design
- Refrigerant Circuit Quick-Release Connections
- Refrigerant Circuit Switches, Sensors, and Related Connections
- Refrigerant Circuit Pressures and Temperatures
- Refrigerant Circuit with Expansion Valve
- Refrigerant Circuit with Restrictor and Reservoir
- Using Pressure Gauge
- Service and Recycling Units
- Refrigerant Circuit Repair Information
- Refrigerant Circuit
- Notes
- Important Repair Notes
- Refrigerant Circuits, Converting from R12 Refrigerant to R134a
- Working with A/C Service Station
- Refrigerant Circuit, Discharging with A/C Service Station
- Refrigerant Circuit, Evacuating with A/C Service Station
- Refrigerant Circuit, Charging with A/C Service Station
- Air Conditioner, Starting after Charging
- Transferring Refrigerant to Charging Cylinder or Reservoir Bottle
- A/C Service Station, Draining
- Refrigerant Circuit, Flushing with Compressed Air and Nitrogen
- Refrigerant Circuit, Flushing with Refrigerant R134a
- Refrigerant Circuit, Determining Leaks
- Possible Refrigerant Circuit Concerns
- A/C Service Station, Connecting
- Refrigerant Circuit, Checking Pressures with A/C Service Station
- Notes
- Pressure Checking, Vehicles with Restrictor and Reservoir with Internally Regulated Compressor
- Pressure Checking, Vehicles with Expansion Valve and Receiver with Internally Regulated Compressor
- Pressure Checking, Vehicles with Restrictor, Reservoir and A/C Compressor Regulator Valve with Externally Regulated Compressor
- Pressure Checking, Vehicles with Expansion Valve, Receiver, and A/C Compressor Regulator Valve with Externally Regulated Compressor
- Refrigerant Circuit Components, Replacing
- Notes
- Leaking or Damaged Components except Compressor, Reservoir, or Receiver
- Compressor, Replacing without Flushing Refrigerant Circuit
- Compressor, Replacing Due to Leakage or Internal Damage
- Receiver or Accumulator and Restrictor, Replacing after Cleaning Refrigerant Circuit
- Receiver or Reservoir, Replacing without Flushing Refrigerant Circuit
- Refrigerant R134a/Refrigerant Oil Capacities and Specifications
- Notes
- Refrigerant R134a Capacities
- Notes
- Capacities for Audi A2 (8Z_) from 2001
- Capacities for Audi A3 (8L_) 1997 to 2004 and Audi TT (8N_) from 1999
- Capacities for A3 (8P_) from 2004
- Capacities for Audi 80 (8A_/8C_), Audi Coupe (8B_), Audi Cabriolet (8G_) through 2002
- Capacities for Audi A4 (8D_) 1995 to 2002
- Capacities for Audi A4 (8E_) from 2001, Audi A4 Cabriolet (8H_) from 2003
- Capacities for Audi 100/Audi A6 (4A_) through 1998
- Capacities for Audi A6 (4B_) from 1998 and Audi Allroad
- Capacities for Audi A6 (4F_) from 2005
- Capacities for Audi V8 (4C_) to 1994
- Capacities for Audi A8 (4D_) 1994 to 2002
- Capacities for Audi A8 (4E_) from 2003
- Capacities for Audi Q7 (4L_) from 2006
- Approved Refrigerant Oils
- Notes
- Refrigerant Oil Capacities
- Capacities for Audi A2 (8Z_) from 2001
- Capacities for Audi A3 (8L_) 1997 to 2004 and Audi TT (8N_) from 1999
- Capacities for Audi A3 (8P_) from 2004
- Capacities for Audi 80 (8A_/8C_), Audi Coupe (8B_), Audi Cabriolet (8G_)
- Capacities for Audi A4 (8D_) 1995 to 2002
- Capacities for Audi A4 (8E_) from 2001, Audi A4 Cabriolet (8H_) from 2003
- Capacities for Audi 100/Audi A6 (4A_) from 1998
- Capacities for Audi A6 (4B_) from 1998 and Audi Allroad
- Capacities for Audi A6 (4F_) from 2005
- Capacities for Audi V8 (4C_) to 1994
- Capacities for Audi A8 (4D_) 1994 to 2002
- Capacities for Audi A8 (4E_) from 2003
- Capacities for Audi Q7 (4L_) from 2006
- Testing Equipment, Tools and Materials
- 87 - Air conditioning
- Air Conditioning
- A/C Compressor
- Maintenance
- Procedures
- Maintenance
- Type plate, vehicle identification number
- Description of work
- All switches, electrical equipment, displays and other driver-operated controls, checking function
- Windshield washer system, checking and adjusting washer jet settings
- Headlight washer system, checking spray jet setting
- Wiper blades, checking park position and checking for damage
- Power window regulators, checking positions
- Digital clock, adjusting
- Air conditioner, checking function and setting temperature to 22°C
- Radio (Symphony), deactivating transport mode
- Radio, activating the anti-theft coding
- On Board Diagnostic (OBD), checking Diagnostic Trouble Code (DTC) memory with VAG 1551 or VAS 5051
- Instrument cluster (Country), coding/adapting the language variants
- Service Reminder Indicator (SRI), inspection service (fixed interval), resetting
- Door checks and lock cylinders, lubricating
- Hood catch hook, lubricating
- Sun roof, checking function, cleaning guide rails and lubricating
- Plenum chamber cover, removing
- Telematics emergency power battery, replacing
- Battery with magic eye, checking display and filling with distilled water
- Battery "no load" voltage, checking
- Battery, checking secure attachment of battery cable
- Battery, performing load test
- Engine cover, removing
- Engine (from above and below) and engine compartment, visually checking for leaks and damage
- Windshield / headlight washer system, filling fluid
- Cooling system, checking antifreeze and filling if necessary
- Air cleaner, cleaning housing and replacing filter element
- Spark plugs, replacing
- Hydraulic system, checking for leaks, checking fluid level and filling if necessary
- Dust and pollen filter, replacing
- Noise insulation, removing
- Toothed belt, replacing
- Transport locks, removing blocking parts for front and rear suspension struts
- Manual transmission/final drive, checking oil level and filling
- Final drive (automatic transmission), checking oil level and filling
- Continuously Variable Transmission (CVT) 01J (Multitronic), changing ATF
- Engine oil, draining or extracting, change oil filter
- Brake system, visually checking for leaks and damage
- Brake pads, checking thickness
- Underseal, visually checking for damage
- Tie rod ends, checking play, attachment and protective boots
- Tires (including spare wheel), checking condition and wear pattern
- Tires (including spare wheel), checking and recording tread depths
- Tires (including spare wheel), inflating to correct pressures
- Tire repair set, checking
- Wheel bolts, tightening
- Engine oil, filling
- Engine oil level, checking
- Brake fluid level, checking
- Brake fluid, changing
- Headlights, checking and adjusting
- Headlights, aiming using Hella Universal Beamsetter IV
- Test drive
- RAPGARD®, inspection, removal and disposal
- Vehicle, lifting
- Towing
- Maintenance Procedures
- 01 - Maintenance
- Engine overview
- Delivery inspection
- Oil change service
- Inspection service
- Description of work
- All switches, all electrical components, all displays and other operating elements: Checking function
- Final drive (automatic transmission): Check oil level, add oil if necessary
- Battery: Check
- Battery: No load voltage, checking before starting engine for the first time
- Battery: Ensure battery cable fits securely
- Battery: Perform battery load test
- Brake system: Visual inspection for leaks and damage
- Brake pads: Checking thickness
- Tires: Checking condition, wear pattern and tread depth and adjusting tire pressure.
- Brake fluid level, dependent on lining wear: Check
- Brake fluid: Changing
- Set digital clock
- Electric windows: Check positioning
- DTC memory: Retrieving with VAS 5051/ 5052
- Check vehicle key function
- Front axle joints: Seal boots, checking play and secure fit.
- Noise insulation: Removing
- Power steering: Check for leaks and fluid level, top off power steering fluid, if necessary
- Rear lid hinges: Lubricate
- Calibrate rearview mirror with compass
- Instrument cluster: Adapt language version
- A/C system: Check function, set temperature to 72 F (22 C)
- Cooling system: Check freeze protection, add coolant, if necessary
- Ribbed belt: Replacing
- Air cleaner: Clean air filter housing and replace filter
- Hood catch: lubricating
- Engine cover: Removing
- Engine (from above and below) and engine compartment: Visual inspection for leaks and damage
- Continuously Variable Transmission (CVT) 01J: Changing ATF
- Engine oil: Drain/extract, replace oil filter
- Engine oil: Fill
- Engine: Oil level, checking
- Navigation: Eject button, unlocking
- Test drive: Perform
- Wheel bolts: Tighten to correct torque setting
- Radio: Activate anti-theft coding by entering security code
- Tire Pressure Monitoring System: Programming tire pressures
- Tire repair kit: Checking
- Windshield washer system: Checking nozzle setting, adjusting nozzles if necessary
- Headlamp washer system: Check spray jet setting.
- Windshield wiper blades: Checking park position
- Service interval display: resetting or adapting
- Windshield/headlamp wiper system: Filling with fluid
- Vehicle Electrical System Control Module - J519: coding
- Dust and pollen filter: Replacing
- Sunroof: Check function, clean guide rails and spray on lubricant spray
- Manual transmission/final drive: Check oil level, add oil if necessary
- Headlamps: Check setting, adjust if necessary
- Deactivate transport mode
- Door arrester and lock cylinder: Lubricate
- Plenum chamber cover: Removing
- Telematics: Emergency battery, replacing
- Transport protection: Remove front and rear strut transportation protection devices
- Underbody protection: Visual inspection for damage
- Winter tires from factory
- Timing belt: Replacing
- Spark plugs: Replacing
- Headlights: Aiming using Hella Universal Beamsetter IV
- RAPGARD: Inspection, removal and disposal
- Type plate / Vehicle Identification Number (VIN)
- Vehicle, lifting
- Tow starting/towing
- Vehicle checks within inspection and service framework
- 01 - Maintenance
- Maintenance Reminder Light (Reset Procedures)
- Emissions Maintenance Reminder (EGR)
- Emissions Maintenance Reminder (Oxygen Sensor)
- Maintenance Service Reminder
- Notes
- Maintenance Service Reminder Reset - Procedure 01
- Maintenance Service Reminder Reset - Procedure 02
- Maintenance Service Reminder Reset - Procedure 03
- Maintenance Service Reminder Reset - Procedure 04
- Maintenance Service Reminder Reset - Procedure 05
- Maintenance Service Reminder Reset - Procedure 06
- Maintenance Service Reminder Reset - Procedure 07
- Maintenance Service Reminder Reset - Procedure 08
- Maintenance Service Reminder Reset - Procedure 09
- Maintenance Service Reminder Reset - Procedure 10
- Maintenance Service Reminder Reset - Procedure 11
- Maintenance Service Reminder Reset - Procedure 12
- Maintenance Service Reminder Reset - Procedure 13
- Tire Pressure Monitor System Reminder
- Notes
- TPMS Reminder Reset - Procedure 01
- TPMS Reminder Reset - Procedure 02
- TPMS Reminder Reset - Procedure 03
- TPMS Reminder Reset - Procedure 04
- TPMS Reminder Reset - Procedure 05
- TPMS Reminder Reset - Procedure 06
- TPMS Reminder Reset - Procedure 07
- TPMS Reminder Reset - Procedure 08
- TPMS Reminder Reset - Procedure 09
- TPMS Reminder Reset - Procedure 10
- Maintenance
- Procedures
- Restraints
- Air Bag, SRS
- Air Bag Restraint Systems
- Description & Operation
- Component Locations
- Servicing
- System Operation Check
- Air Bag Safety Precautions
- Disabling & Activating Air Bag System
- Disposal Procedures
- Post-Collision Inspection
- Removal & Installation
- Notes
- Air Bag Control Module
- Driver-Side Air Bag Module
- Front Air Bag Impact (Crash) Sensors
- Head Air Bag Module
- Passenger-Side Air Bag Module (Wagon)
- Rear Seat Assembly
- Seat Belt PRETENSIONERS (With Fixed Seat Back)
- Side Air Bag Impact (Crash) Sensors (Rear)
- Side Air Bag Module (Rear)
- Spiral Spring (Rear)
- Steering Wheel
- Adjustments
- Torque Specifications
- Diagnostics
- Diagnostic Tests
- Wiring Diagrams
- Air Bag/SRS Component Inspection & Replacement Tables - EUROPEAN
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Body On Board Diagnostic (OBD)
- 01 On Board Diagnostic (OBD)
- Body On Board Diagnostic (OBD), general information
- VAS 5051 Scan Tool (ST), connecting
- Airbag System (with side airbag) from model year 2002, On Board Diagnosis (OBD)
- Driver's seat adjustment with memory, On Board Diagnostic (OBD)
- General information
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Check Control Module Versions (function 01)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Measuring value block overview
- Measuring value block 001
- Display value table
- Measuring value block 002
- Measuring value block 003
- Measuring value block 004
- Measuring value block 005
- Measuring value block 006
- Measuring value block 007
- Measuring value block 008
- Measuring value block 009
- Measuring value block 010
- Measuring value block 011
- Measuring value block 080
- Measured value block 081
- Measuring value block 125
- Measuring value block 126
- Seat control element, basic setting
- Adaptation (function 10)
- Erasing DTC memory
- End output (function 06)
- 01 On Board Diagnostic (OBD)
- Air Bag Restraint Systems
- Passive Restraints
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Glove compartment, removing and installing (vehicles with knee bolster)
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Rearview mirror
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Seat belts, inspecting
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Armrest, removing and installing
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Notes
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Roof trim (Sedan)
- Roof trim (Avant)
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- D-pillar trim, removing and installing
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- 74 - Seats - Upholstery, Covers
- 68 - Interior equipment
- Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery
- 72 - Seat - Frames
- Body Interior - Except Cabriolet (68-Interior Equipment - 70-Interior Trim)
- Air Bag, SRS
- Steering
- Manual Steering
- Steering
- Steering column
- Power steering gear
- Power steering gear, adjusting
- Tie rods
- Power steering
- Power steering fluid level, checking
- Power steering system, bleeding
- Power steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 4-cyl. engine and 6-cyl. diesel engines)
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 6-cyl. engine)
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Steering
- Power Steering
- Steering
- Steering column
- Power steering gear
- Power steering gear, adjusting
- Tie rods
- Power steering
- Power steering fluid level, checking
- Power steering system, bleeding
- Power steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 4-cyl. engine and 6-cyl. diesel engines)
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 6-cyl. engine)
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Steering
- Steering Column
- Steering
- Steering column
- Power steering gear
- Power steering gear, adjusting
- Tie rods
- Power steering
- Power steering fluid level, checking
- Power steering system, bleeding
- Power steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 4-cyl. engine and 6-cyl. diesel engines)
- Power steering pump, reservoir and hydraulic lines, overview (vehicles with 6-cyl. engine)
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Steering
- Steering Gear
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension, Wheels, Steering
- Manual Steering
- Suspension
- Electronic Suspension
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension, Wheels, Steering
- Front Suspension
- Suspension - Front
- Description
- Inspection
- Adjustments
- Removal & Installation
- Torque Specifications
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension - Front
- Rear Suspension
- Suspension - Rear
- Identification
- Description
- Adjustments & Inspection
- On-Vehicle Service
- Removal & Installation
- Notes
- Coil Spring
- Diagonal Brace
- Shock Absorber
- Stabilizer Bar
- Stabilizer Bar Bushings
- SUBFRAME
- SUBFRAME Bushings
- Tie Rods
- Transverse Link & Bushing
- Transverse Link SUBFRAME Nut
- Trapezoidal Link Bushings
- Trapezoidal Link
- Wheel Bearing (AWD, Aluminum Housing)
- Wheel Bearing (AWD, Except Aluminum Housing)
- Wheel Bearing (Fwd)
- Wheel Bearing Housing
- Wheel Bearing Housing Bushings
- Wheel Hub (Light Construction)
- Torque Specifications
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension - Rear
- Suspension Control Systems
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Suspension, Wheels, Steering
- Wheel Alignment
- Specifications & Procedures
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Wheels & Tire System
- Suspension, Wheels, Steering
- 00 - Technical data
- 40 - Front suspension
- Front suspension, servicing
- Suspension strut
- Wheel bearing housing
- Light weight wheel hub
- Mounting bracket and upper links
- Subframe
- Tunnel crossmember
- Vehicles with automatic headlight vertical aim control, vehicle level sensor
- Lower control link
- Guide link
- Stabilizer bar
- Cross brace
- Front diagonal braces, removing and installing
- Front drive axle, servicing
- Drive axle with triple roller joint AAR 2000, servicing
- Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling
- Drive axle with constant velocity inner joint (diameter 100 mm), servicing
- Drive axle with constant velocity inner joint (diameter 108 mm), servicing
- 42 - Rear suspension
- Rear axle component allocation
- General information
- Wheel bearing, lifting to curb weight position
- Component groups
- Part I, Subframe - front wheel drive
- Part II, Subframe - all wheel drive
- Part III, Trapezoidal control arm, transverse link, tie rod
- Part IV, Stub axle carrier - front wheel drive
- Part V, wheel bearing housing (steel) - all wheel drive
- Part VI, Stabilizer bar
- Part VII, Wheel bearing housing (aluminum) - all wheel drive
- Vehicle level sensor in vehicles with automatic headlight vertical aim control
- Rear coil spring
- Strut
- Stub axle carrier/wheel bearing housing and wheel bearing unit
- Stub axle carrier/wheel bearing housing (steel), removing and installing
- Stub axle carrier - front wheel drive, servicing
- Wheel bearing housing (steel) - all wheel drive, servicing
- Wheel bearing (with wheel bearing housing (steel) installed - all wheel drive), removing and installing
- Bolted wheel bearing unit, removing and installing
- Wheel bearing housing (aluminum) - all wheel drive, removing and installing
- Light weight wheel hub
- Transverse link
- Trapezoidal control arm
- Rear subframe
- Tie rod
- Stabilizer bar
- Diagonal braces
- Rear drive axle, servicing
- Rear axle component allocation
- 43 - Self-leveling suspension
- 44 - Wheels, tires, vehicle alignment
- Wheels, tires
- Tire Pressure Monitoring System
- General information
- Tire Pressure Monitoring System, component overview
- Wheel electronics, assembly overview
- Changing tires
- Metal valve body, removing and installing
- Tire Pressure Monitoring Control Module J502 , removing and installing
- Rear Tire Pressure Monitoring System antenna, removing and installing
- Tire Pressure Monitoring System, system usage
- Wheel alignment
- General information
- Test Requirements:
- Specifications for wheel alignment
- Measurement preparations
- Application of adapters to suspension for measurement
- Mechanical steering rack center position, checking
- Front axle camber, checking and adjusting if necessary
- Rear axle camber, adjusting
- Toe at rear axle, adjusting
- Front axle toe-in curve, adjusting
- Vehicle, bringing into initial position for measurement
- Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME
- Toe constant "S" , adjusting
- Front axle toe, adjusting
- 48 - Steering
- Steering wheel with airbag
- Steering column
- Power-assist steering gear
- Power steering gear, adjusting
- Servotronic steering gear
- Tie rod ball joint and tie rod
- Checking oil level, bleeding steering system, checking for leaks
- Power steering pump, reservoir and hydraulic lines, assembly overview
- Power steering pump delivery pressure, checking
- Power steering pump, removing and installing
- Intake hose
- Wheel And Tire Guide
- 44 - Wheels, tires, vehicle alignment
- Wheels, Tires, and Tire Pressure Monitoring
- Fault Finding
- Fault Finding
- Fault Finding, Introduction
- Tire Wear and Service Life
- Rolling Noise Due to Tires
- Wheel and Tire Vibration
- Vehicle Pulls to One Side
- Tire Damage
- Tire Information
- Vehicles with Break-Down Kit
- Tire, Removing
- New Tire, Mounting
- Tires with Rim Protector
- Emergency Wheels, General Information
- Tire Pressure Monitoring System
- Tires with Emergency Running Characteristics, Self-Supporting Tire
- Tires with Emergency Running Characteristics, PAX
- 44 - Wheels, tires, vehicle alignment
- Suspension, Wheels, Steering
- Electronic Suspension
- Transmission
- Clutch
- 6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing
- 00 - Technical data
- 34 - Controls, housing
- Transmission, disassembling and assembling
- Overview
- Assembly overview
- Torsen housing and torsen differential, removing and installing - assembly overview
- Transmission cover and selector shaft, removing and installing
- First, second and reverse gears, removing and installing - assembly overview
- Input shaft, hollow shaft, drive pinion and selector rods, removing and installing - assembly overview
- Assembly sequence
- Notes
- Transmission, disassembling
- Transmission, assembling
- Notes
- Synchronizer rings for 1st, 2nd and reverse gears, checking for wear
- Differentiation of reverse gear synchronization rings - A - and 1st/2nd gear - B -
- Installation location of synchronizer rings for 1st and 2nd gear as well as reverse gear
- 1st and 2nd gear locking collar installation location
- Assembly of locking collar/synchronizer hub for 1st and 2nd gear
- Assemble locking collar and reverse gear selector gear
- Determine thickness of circlip - 1 - and shim(s) - 2 - as follows:
- Input shaft grooved ball bearing, replacing in uninstalled but not disassembled transmission
- Torsen housing, disassembling and assembling
- Torsen housing, disassembling and assembling
- Notes
- Press off flange shaft (torsen housing with vibration dampener)
- Press off flange shaft (torsen housing without vibration dampener)
- Pressing in flange shaft
- As of serial number 42987 - Flange shaft with nut - arrow A - and sealing ring with additional dust lip - arrow B -
- Pry off sealing ring
- Differentiation of sealing rings
- Sealing ring - up to serial number 42986 - installing
- Sealing ring - as of serial number 42987 - with additional dust lip, installing
- Pressing out ball bearing for flange shaft
- Pressing in ball bearing for flange shaft
- Torsen housing, disassembling and assembling
- Transmission cover, servicing
- Transmission cover, servicing
- Notes
- Press needle bearing out of transmission cover
- Press needle bearing into transmission cover
- Remove ball sleeve from transmission housing
- Press ball sleeve into transmission cover
- Ball sleeve press-in depth in transmission cover
- Remove roller sleeve from transmission cover
- Carefully press new roller sleeve into transmission cover to stop.
- Secure needle bearing and roller housing in transmission cover with peen
- Transmission cover, servicing
- Transmission housing, servicing
- Transmission housing, servicing
- Notes
- Remove input shaft needle bearing from transmission housing
- Drive input shaft needle bearing into transmission housing
- Measure needle bearing drive-in depth and secure needle bearing with peening
- Remove selector shaft ball sleeve
- Drive on selector shaft ball sleeve and secure with peening
- Breather tube installation dimension
- Selector shaft sealing ring, removing from disassembled transmission
- Selector shaft sealing ring, removing from assembled transmission
- Selector shaft ball sleeve, driving on
- Driving in selector shaft seal
- Input shaft grooved ball bearing, removing from disassembled transmission
- Drive input shaft grooved ball bearing in to stop
- Remove selector rod ball sleeve - C -
- Drive in selector rod ball sleeve
- Drive-in depth for ball sleeves in transmission housing
- Transmission housing, servicing
- Transmission, disassembling and assembling
- 35 - Gears, shafts
- Input shaft
- Input shaft, assembly overview
- Input shaft, disassembling and assembling - assembly sequence
- Notes
- Synchronizer rings for 3rd to 6th gears, checking for wear
- Installation location of synchronizer rings for 3rd to 6th gears
- Assembly of locking collar/synchronizer hub for 5th and 6th gear
- Pressing on synchronizer hub with locking collar for 5th and 6th gears
- Inner race/needle bearing - arrow A - for 6th gear selector gear, pressing on
- Inner race/needle bearing - arrow A - for 3rd gear selector gear, pressing on
- 3rd/4th gear synchronizer hub installation location
- Pressing on synchronizer hub for 3rd and 4th gears
- 3rd/4th gear locking collar installation location
- Assembly of locking collar/synchronizer hub for 3rd and 4th gear
- Inner race/needle bearing for 4th gear selector gear, pressing on
- Determine thickness of circlip - 1 - and shim - 2 - as follows:
- Drive pinion and hollow shaft
- Drive pinion and hollow shaft, assembly overview
- Drive pinion, disassembling and assembling
- Notes
- Flange shaft mounting needle bearing, removing from drive pinion
- Flange shaft mounting needle bearing, driving in flush in drive pinion
- Pressing off inner race/tapered roller bearing
- Double angular contact ball bearing, pressing off
- Double angular contact ball bearing, pressing on
- Pressing on inner race/tapered roller bearing
- Shim " S 5 " for positioning inner race/tapered ball bearing, redetermining
- Hollow shaft, disassembling and assembling
- Shim " S 6 " for positioning 2nd gear selector gear, redetermining
- Torsen differential bearing, servicing
- Input shaft
- 39 - Front final drive, differential
- Flange shaft seals, replacing
- Differential, removing and installing
- Differential, disassembling and assembling
- Differential, disassembling and assembling
- Notes
- Pulling outer race for right tapered roller bearing out of transmission housing
- Right tapered roller bearing outer race, driving into transmission housing
- Tapered roller bearing inner races, removing
- Pressing off left and right tapered roller bearing inner race
- Left tapered roller bearing outer race, removing from final drive cover
- Left tapered roller bearing outer race, pressing into final drive cover
- Driving ring gear from housing
- Heat ring gear to approx. 100°C and install
- Differential planetary gear axle, removing
- Differential planetary gears, installing
- Differential, disassembling and assembling
- Pinion and ring gear, adjusting
- 6-Speed Manual Transmission 0A3, All Wheel Drive
- 00 Technical data
- 30 Clutch
- Clutch mechanism, servicing
- Clutch mechanism, servicing
- Pedal cluster, assembly overview
- Clutch Pedal Switch F36, removing and installing
- Over-center spring, removing and installing
- Hydraulic system, assembly overview
- Clutch master cylinder and slave cylinder, notes on removing and installing
- Clutch master cylinder, removing and installing
- Hydraulic clutch system, bleeding
- Clutch release mechanism, servicing
- Clutch, servicing
- Clutch mechanism, servicing
- 34 Controls, housing
- Shift mechanism, servicing
- Transmission, removing and installing
- Transmission gear oil, checking level
- Transmission mounting, removing and installing
- Mounting transmission on assembly stand
- Transmission cover and Torsen differential, removing and installing
- Transmission cover, dismantling and assembling
- Transmission cover, dismantling and assembling
- Notes
- Pressing out flange shaft (transmission cover with vibration damper)
- Pressing out flange shaft (transmission cover without vibration damper)
- Pressing in flange shaft
- Levering off the oil seal.
- Preparing oil seal for installation
- Drive in seal onto stop.
- Pressing out ball bearing for flange shaft
- Pressing in ball bearing for flange shaft
- Transmission cover, dismantling and assembling
- Selector shaft with selector cylinder, servicing
- Reversing light switch, removing
- 35 Gears, shafts
- 39 Final drive, differential
- 6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing
- Manual Trans
- 6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing
- 00 - Technical data
- 34 - Controls, housing
- Transmission, disassembling and assembling
- Overview
- Assembly overview
- Torsen housing and torsen differential, removing and installing - assembly overview
- Transmission cover and selector shaft, removing and installing
- First, second and reverse gears, removing and installing - assembly overview
- Input shaft, hollow shaft, drive pinion and selector rods, removing and installing - assembly overview
- Assembly sequence
- Notes
- Transmission, disassembling
- Transmission, assembling
- Notes
- Synchronizer rings for 1st, 2nd and reverse gears, checking for wear
- Differentiation of reverse gear synchronization rings - A - and 1st/2nd gear - B -
- Installation location of synchronizer rings for 1st and 2nd gear as well as reverse gear
- 1st and 2nd gear locking collar installation location
- Assembly of locking collar/synchronizer hub for 1st and 2nd gear
- Assemble locking collar and reverse gear selector gear
- Determine thickness of circlip - 1 - and shim(s) - 2 - as follows:
- Input shaft grooved ball bearing, replacing in uninstalled but not disassembled transmission
- Torsen housing, disassembling and assembling
- Torsen housing, disassembling and assembling
- Notes
- Press off flange shaft (torsen housing with vibration dampener)
- Press off flange shaft (torsen housing without vibration dampener)
- Pressing in flange shaft
- As of serial number 42987 - Flange shaft with nut - arrow A - and sealing ring with additional dust lip - arrow B -
- Pry off sealing ring
- Differentiation of sealing rings
- Sealing ring - up to serial number 42986 - installing
- Sealing ring - as of serial number 42987 - with additional dust lip, installing
- Pressing out ball bearing for flange shaft
- Pressing in ball bearing for flange shaft
- Torsen housing, disassembling and assembling
- Transmission cover, servicing
- Transmission cover, servicing
- Notes
- Press needle bearing out of transmission cover
- Press needle bearing into transmission cover
- Remove ball sleeve from transmission housing
- Press ball sleeve into transmission cover
- Ball sleeve press-in depth in transmission cover
- Remove roller sleeve from transmission cover
- Carefully press new roller sleeve into transmission cover to stop.
- Secure needle bearing and roller housing in transmission cover with peen
- Transmission cover, servicing
- Transmission housing, servicing
- Transmission housing, servicing
- Notes
- Remove input shaft needle bearing from transmission housing
- Drive input shaft needle bearing into transmission housing
- Measure needle bearing drive-in depth and secure needle bearing with peening
- Remove selector shaft ball sleeve
- Drive on selector shaft ball sleeve and secure with peening
- Breather tube installation dimension
- Selector shaft sealing ring, removing from disassembled transmission
- Selector shaft sealing ring, removing from assembled transmission
- Selector shaft ball sleeve, driving on
- Driving in selector shaft seal
- Input shaft grooved ball bearing, removing from disassembled transmission
- Drive input shaft grooved ball bearing in to stop
- Remove selector rod ball sleeve - C -
- Drive in selector rod ball sleeve
- Drive-in depth for ball sleeves in transmission housing
- Transmission housing, servicing
- Transmission, disassembling and assembling
- 35 - Gears, shafts
- Input shaft
- Input shaft, assembly overview
- Input shaft, disassembling and assembling - assembly sequence
- Notes
- Synchronizer rings for 3rd to 6th gears, checking for wear
- Installation location of synchronizer rings for 3rd to 6th gears
- Assembly of locking collar/synchronizer hub for 5th and 6th gear
- Pressing on synchronizer hub with locking collar for 5th and 6th gears
- Inner race/needle bearing - arrow A - for 6th gear selector gear, pressing on
- Inner race/needle bearing - arrow A - for 3rd gear selector gear, pressing on
- 3rd/4th gear synchronizer hub installation location
- Pressing on synchronizer hub for 3rd and 4th gears
- 3rd/4th gear locking collar installation location
- Assembly of locking collar/synchronizer hub for 3rd and 4th gear
- Inner race/needle bearing for 4th gear selector gear, pressing on
- Determine thickness of circlip - 1 - and shim - 2 - as follows:
- Drive pinion and hollow shaft
- Drive pinion and hollow shaft, assembly overview
- Drive pinion, disassembling and assembling
- Notes
- Flange shaft mounting needle bearing, removing from drive pinion
- Flange shaft mounting needle bearing, driving in flush in drive pinion
- Pressing off inner race/tapered roller bearing
- Double angular contact ball bearing, pressing off
- Double angular contact ball bearing, pressing on
- Pressing on inner race/tapered roller bearing
- Shim " S 5 " for positioning inner race/tapered ball bearing, redetermining
- Hollow shaft, disassembling and assembling
- Shim " S 6 " for positioning 2nd gear selector gear, redetermining
- Torsen differential bearing, servicing
- Input shaft
- 39 - Front final drive, differential
- Flange shaft seals, replacing
- Differential, removing and installing
- Differential, disassembling and assembling
- Differential, disassembling and assembling
- Notes
- Pulling outer race for right tapered roller bearing out of transmission housing
- Right tapered roller bearing outer race, driving into transmission housing
- Tapered roller bearing inner races, removing
- Pressing off left and right tapered roller bearing inner race
- Left tapered roller bearing outer race, removing from final drive cover
- Left tapered roller bearing outer race, pressing into final drive cover
- Driving ring gear from housing
- Heat ring gear to approx. 100°C and install
- Differential planetary gear axle, removing
- Differential planetary gears, installing
- Differential, disassembling and assembling
- Pinion and ring gear, adjusting
- 6-Speed Manual Transmission 0A3, All Wheel Drive
- 00 Technical data
- 30 Clutch
- Clutch mechanism, servicing
- Clutch mechanism, servicing
- Pedal cluster, assembly overview
- Clutch Pedal Switch F36, removing and installing
- Over-center spring, removing and installing
- Hydraulic system, assembly overview
- Clutch master cylinder and slave cylinder, notes on removing and installing
- Clutch master cylinder, removing and installing
- Hydraulic clutch system, bleeding
- Clutch release mechanism, servicing
- Clutch, servicing
- Clutch mechanism, servicing
- 34 Controls, housing
- Shift mechanism, servicing
- Transmission, removing and installing
- Transmission gear oil, checking level
- Transmission mounting, removing and installing
- Mounting transmission on assembly stand
- Transmission cover and Torsen differential, removing and installing
- Transmission cover, dismantling and assembling
- Transmission cover, dismantling and assembling
- Notes
- Pressing out flange shaft (transmission cover with vibration damper)
- Pressing out flange shaft (transmission cover without vibration damper)
- Pressing in flange shaft
- Levering off the oil seal.
- Preparing oil seal for installation
- Drive in seal onto stop.
- Pressing out ball bearing for flange shaft
- Pressing in ball bearing for flange shaft
- Transmission cover, dismantling and assembling
- Selector shaft with selector cylinder, servicing
- Reversing light switch, removing
- 35 Gears, shafts
- 39 Final drive, differential
- 6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing
- Transmission Control Systems
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- 20 - Fuel supply
- 24 - Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Components, checking
- Oxygen Sensor (O2S) Heater Z19 f and Oxygen Sensor (O2S) 2 Heater Z28 before catalytic converter, checking.
- Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 and Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , checking
- Mass Air Flow (MAF) Sensor G70 , checking
- Throttle Valve Control Module J338 , checking
- Engine Coolant Temperature (ECT) Sensor G62 , checking
- Engine Speed (RPM) Sensor G28 , checking
- Fuel Injectors N30, N31, N32, N33, N83, N84, N85, N86 , checking
- Function tests
- Heated Oxygen Sensor (HO2S) G39/Heated Oxygen Sensor (HO2S) 2 G108 and oxygen sensor regulation before catalytic converter, checking
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130/Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 and oxygen sensor regulation behind catalytic converter, checking
- Motronic Engine Control Module (ECM) J623
- Additional signals, checking
- 26 - Exhaust system, Emission controls
- 28 - Ignition/Glow plug System
- Ignition, servicing
- General notes on ignition system
- Safety precautions
- Test Data, Spark Plugs
- Camshaft Position (CMP) Sensor G40 and Camshaft Position (CMP) Sensor 2 G163 , checking
- Camshaft Adjustment Valve 1 N205 and Camshaft Adjustment Valve 2 (exhaust) N208 , checking
- Knock Sensor (KS) 1 G61/Knock Sensor (KS) 2 G66/Knock Sensor 3 G198/Knock Sensor 4 G199 , checking
- Ignition Coils with Power Output Stage N70, N127, N291, N292, N323, N324, N325, N326 , checking
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission O9L, checking
- Electrical components for regulating transmission O9L, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Continuously Variable Transmission (CVT) 01V, checking
- Electrical components for regulating transmission O9L, checking
- Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Modes Description
- Diagnostic Mode 01: Obtain data
- Diagnostic Mode 02: Obtain operating conditions
- Mode 03: Interrogating fault memory
- Interrogating the Fault Memory
- Diagnostic Mode 04: Reset/delete diagnostic data
- Diagnostic Mode 05: Check lambda test results
- Notes
- Test-ID 01 ($01): Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1.
- Test-ID 02 ($02): Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
- Test-ID 05 ($05): Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
- Test-ID 06 ($06): Oxygen Sensor Behind Catalytic Converter Bank 2 - Sensor 2.
- Diagnostic mode 6: Checking test results of components that are not continuously monitored
- Notes
- Mode 06 - $01 (01): Catalytic Conversion (Bank 1)
- Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1)
- Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1)
- Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1)
- Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
- Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve
- Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test
- Diagnostic Mode 07: Check test results of components that are continuously monitored
- Diagnostic Mode 08: Tank leak test
- Diagnostic Mode 09: Vehicle information
- Readiness Code
- Diagnostic Trouble Code (DTC) tables
- 4.2L - Generic Scan Tool, Engine Code(S): BHF
- Clutch
- External Pages