Pendulum Support

Removing

-- Remove the noise insulation. Refer to Removal and Installation .

Fig 1: Center Noise Insulation Bolts

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Depending on the version, different noise insulation may be installed.

-- Remove the bolts -1, 2, 3- and remove the pendulum support.

Fig 2: Identifying Pendulum Support & Bolts

Courtesy of AUDI OF AMERICA, LLC

Installing

Install in reverse order, paying attention to the following:

NOTE:

Replace bolts that are tightened to the specification.

-- Attach the pendulum support to the transmission, bolts -2- and -3- and then to the subframe -1-.

-- Install the noise insulation. Refer to Removal and Installation .