Fastener Tightening Specifications
| Components |
Bolt Size |
Nm |
| Through 11.2009 |
| Cover Plate, Nut |
|
9 |
| Disengaging Spring |
|
3.5 |
| Locating Plate |
|
3.5 |
| Mounting Bracket (for selector lever cable on transmission) |
|
23 |
| Selector Lever Cable |
|
13 |
| Selector Mechanism Function Unit, Nut |
|
8 |
| From 12.2009 |
| Cable Mounting Bracket for Selector Lever Cable |
|
23 |
| Selector Mechanism Function Unit, Nut |
|
8 |
| All |
| Bevel Box, Filling and Inspection Plug |
|
15 |
| Bevel Box, Oil Drain Plug |
|
60 |
| Final Drive Support1 |
|
40 + 90° |
| Engine Support Bolt to Engine |
|
40 |
| Filter Housing |
|
20 |
| Overflow Tube |
|
3 |
| Gear Oil Inspection Plug |
|
45 |
| Oil Drain Plug, Only Early Constructions |
|
45 |
| Pendulum Support (pendulum support to subframe)1 |
|
100 + 90° |
| Pendulum Support to Transmission 1 |
|
40 + 90° |
| Transmission Oil Cooler 1 |
|
20 + 45° |
| Transmission Mount (transmission mount to body)1 |
|
40 + 90° |
| Transmission Mount (transmission mount to transmission support)1 |
|
60 + 90° |
| Bracket, Nut (for selector lever cable) |
|
13 |
| Drive Axle Heat Shield to Transmission |
|
20 |
| Selector Mechanism Function Unit |
|
3.5 |
| Selector Mechanism Function Unit, Nut |
|
10 |
|
|
Mounting, Transmission to 4-cylinder 2.0L TFSI Engine:
Courtesy of AUDI OF AMERICA, LLC
| Item |
Bolt |
Nm |
| 1, 3 1) |
M12x55 |
80 |
| 2, 4 |
Starter mount, refer to Removal and Installation |
| 5 |
M12x65 |
80 |
| 6, 7, 8 |
M10x50 |
40 |
| 9 |
M12 x 70 |
80 |
| 10 |
M12x55 |
80 |
| A |
Alignment sleeves for centering |
- 1)
The bolt is only accessible through the opening for the removed starter.
|
Mounting Transmission to 6-cylinder 3.2L Engine:
Courtesy of AUDI OF AMERICA, LLC
| Item |
Bolt |
Nm |
| 1, 3, 6 |
M12x55 |
80 |
| 2, 4 |
Starter mount, refer to Removal and Installation |
| 5, 10 |
M12x65 |
80 |
| 7, 8 |
M10x50 |
40 |
| 9 |
M10x45 |
40 |
| A |
Alignment sleeves for centering |