4.2L - Generic Scan Tool, Engine Code(S): BVJ [Fuel Supply - Ignition/Glow Plug System]

• 20 - Fuel supply
  • Fuel Supply System
    • Fuel Supply System
    • Safety Precautions
    • Rules for Cleanliness
    • Fuel Pump Electrical, Testing
    • Fuel Pump Delivery Quantity, Checking
  • Evaporative Emissions System
    • Evaporative Emissions System
    • EVAP System, Leak Detection
    • EVAP System, Checking for Proper Seal
    • EVAP Canister Purge Valve 1, Checking
    • EVAP Canister Purge Valve 2, Checking
    • Leak Detection Pump, Checking
  • Electronic Engine Power Control
    • Electronic Engine Power Control
    • TP Sensor/Accelerator Pedal Position Sensor 2, Checking
• 24 - Multiport Fuel Injection (MFI)
  • Motronic Fuel Injection System, Servicing
    • Motronic Fuel Injection System, Servicing
    • Safety Precautions
    • Rules of Cleanliness
    • Technical Data
  • Components, Checking
    • Components, Checking
    • Oxygen Sensor Heater before Catalytic Converter, Checking
      • Oxygen Sensor Heater Z19
      • Oxygen Sensor Heater Z28
    • Oxygen Sensor Heater after Catalytic Converter, Checking
      • Oxygen Sensor Heater Z29
      • Oxygen Sensor Heater Z30
    • Mass Air Flow Sensor/Intake Air Temperature Sensor, Checking
      • Notes
      • Test requirements
      • Function test
      • Test procedure
      • Start diagnosis
      • Checking voltage supply
      • Checking electrical circuit
      • Final procedures
    • Throttle Valve Control Module, Checking
    • Fuel Pressure Sensor, Checking
    • Low Fuel Pressure Sensor, Checking
    • Fuel Metering Valve, Checking
      • Fuel Metering Valve N290
      • Fuel Metering Valve N402
    • Engine Coolant Temperature Sensor, Checking
      • Notes
      • Test requirements
      • Function test
      • Test procedure
      • Start diagnosis
      • Checking internal resistance
      • Testing if display is approx. - 40.0°C:
      • Testing if display approx. 140.0°C:
      • Checking wiring
      • Final procedures
    • Engine Speed Sensor, Checking
    • Intake Flap Motor, Checking
    • Variable Intake Manifold Runner Motor, Checking
    • Intake Manifold Runner Position Sensor 1, Checking
    • Intake Manifold Runner Position Sensor 2, Checking
    • Fuel Injectors, Checking
  • Function Tests
    • Function Tests
    • Oxygen Sensor and Oxygen Sensor Regulation before Catalytic Converter, Checking
      • Heated Oxygen Sensor G39
      • Heated Oxygen Sensor G108
    • Oxygen Sensor and Oxygen Sensor Regulation after Catalytic Converter, Checking
      • Oxygen Sensor G130
      • Oxygen Sensor G131
  • Motronic Engine Control Module
    • Motronic Engine Control Module
    • Voltage Supply, Checking
    • Engine Control Module, Removing and Installing
  • Additional Signals, Checking
    • Additional Signals, Checking
    • CAN-Bus Terminal Resistance, Checking
    • Vehicle Speed Signal, Checking
• 26 - Exhaust system, Emission controls
  • Exhaust System Components
    • Exhaust System Components
    • Three Way Catalytic Converter, Checking
  • Secondary Air Injection System
    • Secondary Air Injection System
    • Secondary Air Injection Pump Relay, Checking
    • Secondary Air Injection Pump Motor, Checking
• 28 - Ignition/Glow plug System
  • Ignition, Servicing
    • Ignition, Servicing
    • Safety Precautions
    • Test Data
    • Camshaft Position Sensor, Checking
      • CMP Sensor 1, G40
      • CMP Sensor 2, G163
      • CMP Sensor 3, G300
      • CMP Sensor 4, G301
    • Camshaft Adjustment Valve, Checking
      • Camshaft Adjustment Valve 1, N205
      • Camshaft Adjustment Valve 1, N318, Exhaust
      • Camshaft Adjustment Valve 2, N208
      • Camshaft Adjustment Valve 2, N319, Exhaust
    • Knock Sensor, Checking
      • Knock Sensor 1
      • Knock Sensor 2
      • Knock Sensor 3
      • Knock Sensor 4
    • Ignition Coils with Power Output Stage, Checking
      • Ignition Coils with Power Output Stage, Bank 1
      • Ignition Coils with Power Output Stage, Bank 2
• 38 - Automatic Transmission - Gears, Hydraulic controls
• ST - Generic Scan Tool