2.0L - Turbo Fuel Injection Ignition, Engine Code(S): BPG, BWT
- 24 - Multiport Fuel Injection (MFI)
- Safety measures and cleanliness rules
- Procedure that must be performed before opening the high-pressure fuel injection system - Pay close attention!
- Technical data
- Overview of component locations
- Notes
- Fuel Pressure Sensor G247 - 1 - (Torque Specification 22 Nm)
- Camshaft Position (CMP) Sensor G40 - 1 -
- Mass Air Flow (MAF) Sensor G70 - 1 -
- Camshaft Adjustment Valve 1 N205 - 1 - and Fuel Pressure Regulator Valve N276 - 2 -
- Intake Air Temperature (IAT) Sensor G42 - 1 - Throttle Valve Control Module J338 - 2 -
- Fuel Pump (FP) Control Module J538 - 1 -
- Electrical harness connectors
- Oxygen sensors
- Installed location of Engine Control Module (ECM) J623
- Engine Coolant Temperature (ECT) Sensor G62 - 1 -
- Installed location Brake Light Switch F/Brake Pedal Switch F47 , Clutch Pedal Switch F36
- Installed location in 4-socket relay carrier, plenum chamber E-box
- Installed location on 9-socket relay carrier in driver footwell
- Component locations beneath intake manifold
- Charge Air Pressure Sensor G31 - 1 -
- Oil Level Thermal Sensor G266
- Components on turbocharger
- Air filter, assembly overview
- Engine cover, removing and installing
- Air filter insert, removing and installing
- Mass Air Flow (MAF) Sensor G70 , removing and installing
- Intake Manifold, assembly overview
- Fuel rail, assembly overview
- Intake manifold with fuel rail, removing and installing
- Fuel rail, removing and installing
- Fuel injectors, removing and installing
- Combustion chamber sealing ring (Teflon sealing ring), replacing
- Fuel pressure and residual pressure before high pressure pump, checking
- High pressure pump, assembly overview
- High pressure pump, removing and installing
- Wiring and components, checking with Test box V.A.G 1598/42
- Engine Control Module (ECM) J623 , replacing
- Heated Oxygen Sensor (HO2S) G39 and Oxygen Sensor (O2S) Heater Z19 before catalytic converter, removing and installing
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130 and Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)) Z29 , removing and installing
- 28 - Ignition/Glow plug System