October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Assembly Overview
Courtesy of AUDI OF AMERICA, LLC
- Ignition coil connector
- Bolt
- 3-pin connector
- Camshaft Position (CMP) sensor
- Camshaft position sensor -G40- cylinder bank 1
- Camshaft position sensor 3 -G300- cylinder bank 1
- Camshaft position sensor 2 -G163- cylinder bank 2
- Camshaft position sensor 4 -G301- cylinder bank 2
- O-ring
- Replace if damaged
- Coat with clean engine oil.
- Bolt
- 20 Nm
- Tightening specifications affect function of Knock Sensor (KS)
- Knock sensors
- Contact surfaces between knock sensor and cylinder block must be free of corrosion, dirt and grease
- Knock sensor (KS) 1 -G61- cylinder bank 1
- Knock sensor (KS) 2 -G66- cylinder bank 1
- Knock sensor (KS) 3 -G198- cylinder bank 2
- Knock sensor (KS) 4 -G199- cylinder bank 2
- Removing and installing. Refer to Knock Sensors
- Spark plug
- Removing and installing with the spark plug removal tool -3122 B-.
- 30 Nm
- Ignition coil
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Ignition Coil 5 with Power Output Stage -N323-
- Ignition Coil 6 with Power Output Stage -N324-
- Ignition Coil 7 with Power Output Stage -N325-
- Ignition Coil 8 with Power Output Stage -N326-
- Removing and installing. Refer to Ignition Coils with Power Output Stages .
- To remove, use the ignition coil puller -T40039-