Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING: Notes
The Information Electronics Control Module 1 -J794- is located inside the instrument panel.
Special tools and workshop equipment required
- Radio Removal Tool T10057
- Fiber-Optic Repair Set - Connector Protective CapsVAS6223/9.
-- If replacing the control module, select the "Replace Control Module" function on the Vehicle Diagnostic Tester.
Use Vehicle Diagnostic Tester.
-- Activate the parking brake.
-- Turn off the ignition and all electrical consumers and remove the ignition key.
WARNING:
Danger of unintended engine ignition
Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.