4.2L - Fuel Injection And Ignition, Engine Code(S): BVJ
- 24 - Multiport Fuel Injection (MFI)
- Safety measures and cleanliness rules
- Fuel injection system
- Technical data
- Component location overview
- Notes
- Location Engine Control Module (ECM) J623
- Component location Throttle Position (TP) Sensor G79/Accelerator Pedal Position Sensor 2 G185
- Installation location on pedal mount
- Fuel Pump (FP) Control Module J538
- 9-compartment relay and fuse carrier behind storage compartment on drivers side
- Relay and fuse carrier in left E-box plenum chamber
- Relay and fuse carrier in right E-box plenum chamber
- Cylinder bank 1 (right) oxygen sensor connectors
- Cylinder bank 2 (left) oxygen sensor connectors
- Oxygen sensors location, cylinder bank 1 (right)
- Oxygen sensors location, cylinder bank 2 (left)
- Location Engine Speed (RPM) Sensor G28
- Component location of Engine Coolant Temperature (ECT) Sensor G62
- Intake Air Switch-Over valve N335 - 2 -
- Location on right cylinder bank 1
- Location on left cylinder bank 2
- Component location view from inside from right cylinder head 1
- Component location view from inside from left cylinder head 2
- Component location front on engine
- Location of Fuel Level Sensor F1
- Location of high pressure pumps
- Map Controlled Engine Cooling Thermostat F265 location
- Air filter, assembly overview
- Air filter element, removing and installing
- Mass Air Flow (MAF) Sensor G70, removing and installing
- Intake manifold, assembly overview
- Intake manifold, removing and installing
- Fuel pressure and residual pressure before high pressure pump, checking
- High pressure pump, assembly overview
- High pressure pump, removing and installing
- Fuel rail with fuel injectors, assembly overview
- Fuel injectors, removing and installing
- Heated Oxygen Sensor (HO2S) G39 (in front of catalytic converter) and Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130, cylinder bank 1, removing and installing
- Heated Oxygen Sensor (HO2S) 2 G108 (in front of catalytic converter) and Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131, cylinder bank 2, removing and installing
- Engine control module
- 28 - Ignition/Glow plug System