Steering Angle Sensor -G85-, REMOVING AND INSTALLING: Installing
-- Attach the Airbag Spiral Spring/Return Spring with Slip Ring -F138- -2- to the switch module -3-. Refer to Exterior Lights, Lamps and Switches .
-- Install the steering column trim. Refer to Interior Equipment .
-- Install the steering wheel. Refer to Steering .
-- Install the driver airbag. Refer to Passenger Protection, Airbags, Seat Belts .
-- Then the steering angle zero adjustment must be performed.
-- Connect the Vehicle Diagnostic Tester to the vehicle data link connector with the ignition switched off.
NOTE:
Switch the ignition on.
DTC memory interrogated, errors shown corrected and DTC memory erased.
-- Start the program in Guided Functions.