LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2012 >> A7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Climate Control System (Service Information 2 Of 2)) >> Air Conditioning >> Display And Control Head >> Display And Control Head, Removing And Installing >> Climatronic Control Module -J255-, REMOVING AND INSTALLING >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Climatronic Control Module -J255-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Installation is done is reverse order, observe the following:

-- When replacing a Climatronic Control Module -J255- control head, pay attention to the exact allocation.

After replacing/installing the Climatronic Control Module -J255- control head, always perform the following procedures on the Vehicle Diagnostic Tester in the "Guided Fault Finding"  function.

-- Perform and/or check the coding.

-- Perform the basic setting.

-- Read the Diagnostic Trouble Code (DTC) memory (and clear the input for the currently displayed entry).

-- Check the adaptation.

-- If necessary, perform the output diagnostic test.

scientia non olet · About LEMON Manuals