LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Anti-Theft System - Security And Locks) >> Keyless Entry Control Module >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Keyless Entry Control Module: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the left rear quarter trim. < Ref. to REMOVAL , Rear Quarter Trim . >
  3. Disconnect the keyless entry control module harness connector.
  4. Remove the bolt and then remove the keyless entry control module.
    Fig 1: Bolt And Keyless Entry Control Module
    G07666542Courtesy of SUBARU OF AMERICA, INC.