LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2013 >> S7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Climate Control System (Service Information 2 Of 2)) >> Air Conditioning >> Battery Cooling Module >> Battery Cooling Module, Bringing Into Service Position >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery Cooling Module, Bringing Into Service Position: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Installation is carried out in the reverse order while observing the following.

-- Reinstall the previously removed component.

-- Turn on the ignition.

-- After installing, check and, if necessary, erase the displayed faults in the Diagnostic Trouble Code (DTC) memory for the Climatronic Control Module -J255- control head and the Battery Regulation Control Module -J840-. Use the Vehicle Diagnostic Tester in the "Guided Fault Finding"  function.

scientia non olet · About LEMON Manuals