Peripheral Camera Control Module -J928-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Move the carpet to the side. Refer to CARPET .

-- Open the E-box cover -1-.

Fig 1: Opening E-Box Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the connectors -arrows- from the Peripheral Camera Control Module -J928- -2-.

The Peripheral Camera Control Module -J928- -2- is only clipped into the E-box.

Fig 2: Identifying Peripheral Camera Control Module -J928-

Courtesy of AUDI OF AMERICA, LLC

-- Push the retainer to the side and remove the Peripheral Camera Control Module -J928- -2- from the E-box.