LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2014 >> S6 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing - S TRONIC Transmission >> 34 Controls, Housing >> ATF Circuit >> ATF Pipes, Removing And Installing >> Installing >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ATF Pipes, Removing And Installing: Installing: Notes

Install in reverse order of removal. Note the following:

NOTE: Replace the O-rings.
CAUTION:

Danger of causing damage to the transmission.

  • When disassembling, remove all the plugs, which were taken from the Engine Bung Set VAS 6122, and the ATF pipe/hose line and from the transmission.
  • The ATF cooling function will not work and the transmission will be damaged if the plugs are forgotten.

-- First insert the ATF pipe/hose lines into the transmission and radiator by hand as far as the stop and then bolt them on.

-- Check and adjust the ATF level after installing the transmission, refer to ATF LEVEL, CHECKING .

scientia non olet · About LEMON Manuals