LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2014 >> S7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Climate Control System (Service Information 1 Of 2)) >> Air Conditioning >> A/C Compressor >> Drive Plate With Overload Protection, Removing And Installing >> Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the drive plate with the overload protection -B- onto drive plate.

-- Insert the bolts and tighten them all the way by hand.

-- Check the drive plate run-out. Refer to DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .

-- Tighten the bolts.

-- Check the drive plate run-out again.

scientia non olet · About LEMON Manuals