Overview - ATF Circuit

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 9 Nm
ATF Cooler
- Removing and installing, refer to ATF COOLER, REMOVING AND INSTALLING .
Nut
- Observe tightening sequence
Spacer
- For ATF lines on the transmission
- After installing clip the ATF lines in the bracket.
ATF Line, Supply
- Attached to the ATF cooler with a "quick release coupling"
- Replace if leaking
- Removing and installing, refer to ATF PIPES, REMOVING AND INSTALLING .
ATF Pipe Return
- Attached to the ATF cooler with a "quick release coupling"
- Replace if leaking
- Removing and installing, refer to ATF PIPES, REMOVING AND INSTALLING .
Bolt
- 20 Nm
O-Ring
- Coat with ATF
Bolt
- 20 Nm
- For ATF lines on the bracket for the ATF cooler
Bolt
- 9 Nm
Solenoid Valve
- Remove the ATF filter bracket for removing and installing, while doing this do not open the coolant hoses.
Bolt
- 24 Nm
- For the bracket/ATF cooler on the transmission
- Observe tightening sequence
ATF Cooler Bracket
- Removing and installing, refer to AUTOMATIC TRANSMISSION FLUID BRACKET, REMOVING AND INSTALLING .
- Overview - return-flow pump on the ATF cooler bracket refer to the illustration below.

Courtesy of AUDI OF AMERICA, LLC