Combination Switch (Light): Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the screws and remove the steering column cover lower.

Fig 1: Locating Screws And Steering Column Cover Lower
Courtesy of SUBARU OF AMERICA, INC.
Remove the harness cover lock.
Remove the screws and detach the knee protector.

Fig 2: Locating Screws And Knee Protector
Courtesy of SUBARU OF AMERICA, INC.
Remove the mounting screws of steering column cover upper.

Fig 3: Locating Steering Column Cover Upper Of Mounting Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from combination switch.
Remove the screws which secure the switch, then remove the combination switch.

Fig 4: Locating Combination Switch And Screws
Courtesy of SUBARU OF AMERICA, INC.