Peripheral Camera Control Module -J928-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Move the carpet to the side. Refer to CARPET, REMOVING AND INSTALLING .

-- Open the E-box cover -1-.

Fig 1: Opening E-Box Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the connectors -arrows- from the Peripheral Camera Control Module -J928- -2-.

The Peripheral Camera Control Module -J928- -2- is only clipped into the E-box.

Fig 2: Opening E-Box Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Push the retainer to the side and remove the Peripheral Camera Control Module -J928- -2- from the E-box.