Radio Frequency Controlled Clock Receiver, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Tightening Specification. Refer To OVERVIEW - INSTRUMENT CLUSTER .

Install In Reverse Order Of Removal. Note The Following:

-- Install The Rear Bumper Cover. Refer To OVERVIEW - REAR BUMPER COVER, AUDI RS5 / BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

Vehicles With Lane Change Assistance:

If The Bumper Cover Was Removed, The Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770- Must Be Calibrated Again. Refer To LANE CHANGE ASSISTANCE, PREPARING FOR CALIBRATION .