Testing Values And Process Specifications Table (Brake Fluid, Changing):
The table value is based on one brake caliper, that means the extracted fluid amount for both bleed screws per brake caliper must together match the set value from the table.
BRAKE FLUID BLEEDING SEQUENCE SPECIFICATION
| Bleed Screw Sequence: | Extracted Brake Fluid Amount: | |
|---|---|---|
| Brake caliper | ||
| Driver side front axle | 1. | 0.20 liter |
| Front passenger side front axle | 2. | 0.20 liter |
| Driver side rear axle | 3. | 0.30 liter |
| Front passenger side rear axle | 4. | 0.30 liter |
| Clutch slave cylinder | 5. | 0.15 liter |
| → Automatic transmission total quantity | 1.00 liter | |
| → Manual transmission total quantity | 1.15 liters | |