Rollover Support Function, Checking With Convertible Top Open

Requirements: 

• The convertible top is opened.

Removal Procedures: 

-- Remove both rollover protection trim pieces. Refer to the appropriate service information .

Procedure: 

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Select Diagnostic  mode and start the diagnosis.

-- Perform the vehicle identification.

-- Deselect "Working with Guided Fault Finding" by removing v  and pressing Accept  .

-- Switch to the "Special Functions" tab and select the following program:

• 15 - Rollover support output diagnostic test mode

-- Start the program using Perform test...  .

-- Continue the program sequence.

Installation procedures occur in reverse order.