LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2021 >> Q8 Premium Plus >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> General Information >> Maintenance Work >> Engine Oil, Filling
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Oil, Filling

Special Tools And Workshop Equipment Required 

CAUTION:

Pressing the accelerator pedal too soon after the oil change damages the engine.

  • Run the engine in idle as long as the indicator lamp for engine oil pressure in the instrument cluster is turned on.
  • Only increase the RPM when the indicator lamp goes out.
CAUTION:

Shortened oil change time interval for Basis-EA897evo3 V6 TDI engines. Always pay attention to the Maintenance Table.

Refer to the MAINTENANCE, DIAGNOSIS (FLUID CAPACITY TABLES - 2019) / MAINTENANCE, DIAGNOSIS (FLUID CAPACITY TABLES - 2020) .

Procedure: 

-- Fill the engine oil using the Filling Aid for Engine Oil:VAS6842  .

-- Then check the oil level and correct if necessary. Refer to ENGINE OIL LEVEL, CHECKING AND CORRECTING IF NECESSARY .

-- For all 4-cylinder 2.0L TFSI gasoline engines with oil filler tube on the chain guard cover: clean the sealing surface -arrow- on the inside of the oil filler tube with a lint-free cloth, before installing the cap.

Fig 2: Sealing Surface
GWWA17-11036Courtesy of AUDI OF AMERICA, LLC
NOTE:

The specified oil quantity in the MAINTENANCE, DIAGNOSIS (FLUID CAPACITY TABLES - 2019) / MAINTENANCE, DIAGNOSIS (FLUID CAPACITY TABLES - 2020) refers to the oil change and is not identical to the engine oil capacity at the initial filling.