Seat Belt Webbing, Checking

Procedure 

-- Pull the belt completely out of the automatic belt retractor or lap belt adjustment tongue.

-- Check the seat belt webbing for contamination, wash with mild soapy water if necessary. Refer to the Owner's Manual.

• If one of the types of damage (1 and 2) shown in the following is detected on a vehicle which has been in an accident, the entire seat belt must be replaced with the belt latch.
• If damage as illustrated under points 1, 2 or 3 is determined on a vehicle that has not been in an accident, only replace the damaged seat belt.
• 1 - Seat belt webbing cut, torn or frayed.
  Fig 1: Belt Webbing Cut, Torn Or Chafed

  Courtesy of AUDI OF AMERICA, LLC
• 2 - Webbing loops on seat belt edge torn.
  Fig 2: Checking Belt Webbing - Webbing Loops On Belt Edge Torn

  Courtesy of AUDI OF AMERICA, LLC
• 3 - Burn marks from cigarettes or similar.
  Fig 3: Burn Marks From Cigarettes Or Similar

  Courtesy of AUDI OF AMERICA, LLC