Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the cover -1- with the clip release lever in direction of -arrows A, B and C- by carefully inserting the clip release lever between the windshield and the cover.

-- Repeat the procedure on the opposite side.

-- Disengage the front cover and remove toward the rear.

-- Free up and disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -1 and 4- and remove the lens -3- forward from the mount in direction of -arrow-.

-- Push the clip -5- toward the vehicle interior in direction of -arrow- and guide the support -6- for the Driver Assistance Systems Front Camera -R242- -1- downward and out the mount -7-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Driver Assistance Systems Front Camera -R242- to the right from the retaining plate mount -2-.

-- Release the connector -3- and antenna wire -4- and disconnect.