Airbag Unit With Igniter, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
- Make sure the connectors are pushed in all the way and that they engage audibly.
- Make sure the wires are not pinched.
-- Connect the spiral spring connector to the airbag connector coupling on the return spring.
-- Press in the connector to secure it in the pockets on the steering wheel.
-- Position the driver side airbag in the steering wheel and press on until it audibly engages.
Risk of airbag deployment.
Risk of injury.
- Switching on the ignition (key/button) after assembly may only be done when the driver seat is positioned all the way back.
-- Check and erase the airbag control module DTC memory because faults can be stored from when the connectors are disconnected. Use the Vehicle Diagnostic Tester.