Control Module For Left And Right Front Object Detection Radar Sensor -J1088- / -J1089-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2025 Audi SQ7 and 2025 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -1-.
-- Remove the bolts -2-.
-- Tilt the control module -3- with the shield in the -direction of the arrow- and out of the retainer and remove.