LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2025 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 362 (Driver Assistance Systems) >> 98 Assistance Systems >> Sensors And Control Modules >> Night Vision System Camera -R212-, REMOVING AND INSTALLING >> Protective Window, Removing >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Protective Window, Removing: Notes

WARNING: This page is about a different car, the 2025 Audi SQ7 and 2025 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the protective window is no longer water tight due to damage, the Night Vision System Camera -R212- must be completely replaced. Refer to Night Vision System Camera -R212-, REMOVING AND INSTALLING .

-- Push the retaining tabs -arrows- together and turn the cover approximately 90° counter-clockwise.

Fig 1: Turning Cover Approximately 90 Degrees Counter-Clockwise
GWWA44-10231Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover, protective window and seal from the Night Vision System Camera -R212-.

NOTE:

Replace the seal after every removal.