ZCS Codable Control Modules

Control modules located in a vehicle that are ZCS codable are listed/identified by the "Codierung ZCS/FA" function contained in CIP.

A list of the modules specific to the model can be accessed as follows:

From Progman establish a connection to the interface connected to the vehicle and access CIP.

To perform the procedure from CIP the Model series must be selected (3 series, 7 series ...). 

Then select the body (E32, E36 ...). 

Fig 1: Selecting Model Series Selection Menu

Courtesy of BMW OF NORTH AMERICA, INC.

Select "CodierungZCS/FA". 

Then advance screen to the right two times to enter the vehicle series selection screen.

Fig 2: Selecting CodierungZCS/FA

Courtesy of BMW OF NORTH AMERICA, INC.

Example: 

Select vehicle series  (i.e "E36 Series"  ).

Fig 3: Selecting Vehicle Series

Courtesy of BMW OF NORTH AMERICA, INC.

Select "Recode". 

Then advance screen to the right.

Fig 4: Selecting Recode

Courtesy of BMW OF NORTH AMERICA, INC.

Displays control modules that are ZCS codable.

Fig 5: [Displays Control Modules That ZCS Codable]

Courtesy of BMW OF NORTH AMERICA, INC.