LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2000 >> Z3 2D Convertible, 2.5 3, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Generators & Regulators >> Bench Testing >> Diode Assembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Diode Assembly

  1. Place DVOM on x100 scale. Connect DVOM leads, in turn, between B+ terminal and each stator terminal. See Fig 1. Reverse leads. DVOM should indicate continuity in one direction only.
  2. Connect DVOM leads, in turn, between negative plate and each stator terminal. Reverse leads. DVOM should indicate continuity in one direction only.
  3. Connect DVOM leads, in turn, between D+ terminal and each stator terminal. Reverse leads. DVOM should indicate continuity in one direction only. Replace diode assembly if continuity is not as specified.
Fig 1: Testing Diode Assembly
G92C00564Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals