Toe-In Adjustment: Rear
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A change of camber always involves a change of toe. Adjust camber first. See CAMBER ADJUSTMENT
.
- Replace nut (1). Ensure eccentric washer (2) is correctly located. See Fig 1 . Tighten nut (1) to specification. See TORQUE SPECIFICATIONS .
- Release nut (1) again by 1/2 to 1 turn.
- Adjust toe with eccentric screw (3) precisely to specification. See WHEEL ALIGNMENT SPECIFICATIONS .
- Ensure eccentric washer is correctly located (2). See Fig 1 . Tighten nut (1) to specification. See TORQUE SPECIFICATIONS .
CAUTION:
If the nut is tightened down more than 10 times during adjustment, it must be replaced again. The self-locking effect becomes too slight.