52 26... Removing and installing/replacing FOLD microswitch

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove backrest cover . See 52 26 411 REPLACING BACKREST COVER FOR LEFT REAR SEAT or 52 26 412 REPLACING BACKREST COVER FOR RIGHT REAR SEAT .
Remove TRIMS FROM BACKREST FRAME, OUTER .

Fig 1: Removing Microswitch From Seat Backrest Frame
Courtesy of BMW OF NORTH AMERICA, INC.

Unclip microswitch (1) from seat backrest frame.

Installation:

Make sure contact sensor (2) is fitted correctly on pin (1).

Fig 2: Identifying Contact Sensor And Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Fig 3: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.