13 62 531 Replacing coolant temperature sensor
WARNING: This page is about a different car, the 2013 BMW M3, 2012 BMW M3, and 2011 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Read out fault memory of DME control unit; if necessary, work through test schedules.
- Switch off ignition.
- REMOVE INTAKE AIR MANIFOLD .
Unlock plug and remove.
Remove temperature sensor.
Installation:
Tightening torque, 13 62 1AZ .
NOTE:
Now clear the fault memory.