61 35 015 Removing and installing (replacing) control unit for Car Access System

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary work:

Disconnect plug connection (1).

Release screw (2).

Tightening torque 61 35 1 AZ .

Remove control unit for Car Access System (3) in direction of arrow.

Fig 1: Removing Control Unit For Car Access System

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Feed guide (1) of control unit for Car Access System (2) correctly into associated mounting.

Fig 2: Identifying Car Access System With Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

For vehicles with rear-seat entertainment (RSE):

Teach in RSE master key via path: