E-transmission, complete
27 00 E-TRANSMISSION, COMPLETE - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |||
|---|---|---|---|---|---|---|
| 1AZ E-transmission to electrical machine (Aluminum screws/bolts are not magnetic). | I01 | M12 | Replace aluminum screws. Joining torque and angle of rotation must be observed without fail. |
|||
| Joining torque | 25 Nm | |||||
| Angle of rotation | 90° | |||||
| 2AZ E-transmission to range extender | I01 | M10 | 56 Nm | |||
| 3AZ Transmission mounting bracket, right to transmission | I01 | M10 | Replace screws | |||
| Joining torque | 56 Nm | |||||
| Angle of rotation | 90° | |||||
| 4AZ Transmission mounting bracket, right to alternator, range extender | I01 | M10 | 56 Nm | |||
| 5AZ Transmission mounting bracket, left to electrical machine | I01 | M10 | 56 Nm | |||
| 6AZ Bearing journal, right to transmission mounting bracket (Battery Electric Vehicle) | I01 | M12 | Replace screw | |||
| Joining torque | 96 Nm | |||||
| Torque | 45° | |||||
| M14 | Joining torque | 40 Nm | ||||
| Torque | 165 Nm | |||||
| 7AZ Tappet bearing, right to transmission mounting bracket (range extender) | I01 | M12 | Replace screw | |||
| Joining torque | 96 Nm | |||||
| Angle of rotation | 45° | |||||
| M14 | Joining torque | 40 Nm | ||||
| Torque | 165 Nm | |||||
| 8AZ Bearing journal, left to transmission mounting bracket (electrical machine) | I01 | M12 | Replace screw | |||
| Joining torque | 96 Nm | |||||
| Angle of rotation | 120° | |||||
| M14 | Joining torque | 40 Nm | ||||
| Torque | 165 Nm | |||||
| 9AZ Anti-roll bar link to electrical machine | I01 | M12 | 100 Nm | |||
| 10AZ Anti-roll bar link to Drive module or electrical machine | I01 | M12 | 100 Nm | |||
| 11AZ HV holder to transmission | I01 | M6 | 12 Nm | |||
| 12AZ Parking lock actuator to transmission | I01 | 19 Nm | ||||
| 13AZ Oil drain plug / oil filler plug | I01 | M22x1.5 | Replace gasket | 35 Nm | ||