LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1975 >> Skyhawk Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Testing >> Window Switch To Window Motor Harness
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Window Switch To Window Motor Harness

  1. Disconnect harness connector from motor. Insert one end of a jumper wire in switch connector and other end of jumper to motor lead in connector. Using a test lamp, check for current at motor connector. If lamp does not light, switch to motor harness is shorted or has open circuit. Check other terminal using same procedure.
    Fig 1: "B", "C" & "E" BODY (EXC. TWO-WINDOW TYPE) POWER WINDOW WIRING DIAGRAM
    G09353667Courtesy of GENERAL MOTORS COMPANY
    Fig 2: A" & "X" BODY POWER WINDOW WIRING DIAGRAM
    G09353668Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals