Differential Assembly
| Carrier Type | Integral | |
| Ring Gear & Pinion Backlash | Method | Shims |
| Adjustment Note: Side gear backlash. | .005-.009 Inch (in) | |
| Pinion Bearing Preload | Method | Spacer |
| New Bearing Note: Measured with torque wrench at pinion flange nut. | 18-24 Inch Pound-Force (in.lb) | |
| Used Bearing Note: Measured with torque wrench at pinion flange nut. | - Note: Pre-check reading plus 5 inch lbs. | |
| Differential Bearing Preload | Method | Shims |
| New Bearing | Slip Fit Note: Slip fit plus .003 inch preload on each side. | |
| Used Bearing | Slip Fit Note: Slip fit plus .003 inch preload on each side. |