Checking Fluid Level
CAUTION:
DO NOT
overfill. One pint of fluid will raise level from "ADD 1 PT. OR .5L" to "FULL HOT" mark on dipstick with a hot transmission.
- Warm transmission to normal operating temperature by at least 15 miles of highway driving. With engine at curb idle, move selector lever through all ranges, ending in Park.
- Remove dipstick. Wipe dipstick clean and reinstall. Remove again and inspect level. Fluid level should check between "ADD 1 PT. OR .5L" and "FULL HOT" marks on dipstick.
CAUTION:
If vehicle has been operated for an extended period of time at high speed, in city traffic in hot weather, or if vehicle has been pulling a trailer, an accurate fluid level cannot be determined until fluid has cooled down (about 30 minutes after vehicle has been parked).