October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
ECM Output Parameters:
- E000
No outputs display will not show HI or LO. This is normal resting code where no outputs will be cycled.
- E001
Torque Converter Clutch display will be LO when TCC solenoid is ON (energized).
- E004
EGR solenoid #1 display will be LO when #1 EGR solenoid is ON (energized).
- E005
EGR solenoid #2 display will be LO when #2 EGR solenoid is ON (energized).
- E006
EGR solenoid #3 display will be LO WHEN #3 EGR solenoid is ON (energized).
- E007
Canister purge solenoid display will be LO when solenoid is ON (energized).
- E008
A/C RELAY display will be LO when A/C clutch relay is ON (energized).
- E009
#1 coolant fan relay (FAN REL 1) display is LO when coolant fan is ON (energized).
- E010
#2 coolant fan relay (FAN REL 2) display is LO when coolant fan is ON (energized).
- E011
IAC MOTOR output display will cycle LO (IAC extending) to HI (IAC retracting). DO NOT ACTIVATE this output if IAC has been removed from throttle body.